The Developer Connection - Device Driver Kit for OS/2 3

home *** CD-ROM | disk | FTP | other *** search

/ The Developer Connection…ice Driver Kit for OS/2 3 / DEV3-D1.ISO / editors / epm / sampmacs / draw.e < prev next >

Wrap

Text File | 1993-08-12 | 14.0 KB | 453 lines

/****************************************************************************** DRAW.E revised from SLIMDRAW.E Bryan Lewis 3/23/88 Two small changes have made this a separately-compilable and linkable-at-runtime module. In EOS2 it makes more sense to "connect up" the DRAW feature only when needed, rather than compile it into the always-present base. Any stand-alone command (not called as a subroutine by others) that's used only occasionally is a good candidate for linking. (1) The conditional compilation test (WANT_DRAW) has been removed to make this separately compilable, since WANT_DRAW is defined in STDCNF.E, not available when this is compiled alone. (2) A DEFMAIN has been added which merely invokes the original DRAW command. When the user issues "draw" on the command line, DRAW.EX will be linked from disk and entered at DEFMAIN. The effect seen by the user will be the same as before, except for the slight delay of searching the DPATH for DRAW.EX. When DEFMAIN finishes, DRAW.EX will be automatically unlinked to free up memory. (SlimDraw was revised from Davis Foulger's DRAW.E by Bryan Lewis 10/87.) (Insert-toggle feature suggested by John McAssey.) ******************************************************************************/ compile if not defined(SMALL) -- If being externally compiled... define INCLUDING_FILE = 'DRAW.E' const tryinclude 'MYCNF.E' compile if not defined(SITE_CONFIG) const SITE_CONFIG = 'SITECNF.E' compile endif compile if SITE_CONFIG tryinclude SITE_CONFIG compile endif const compile if not defined(WANT_DBCS_SUPPORT) WANT_DBCS_SUPPORT = 0 compile endif compile if not defined(NLS_LANGUAGE) NLS_LANGUAGE = 'ENGLISH' compile endif include NLS_LANGUAGE'.e' include 'stdconst.e' compile endif compile if EVERSION < 4 -- For EOS2, Removed to DRAWKEY.E, to make this compile if WANT_DRAW <> 1 -- separately compilable. def F6= cursor_command 'draw' compile endif compile else defmain -- We want to start executing as soon as we're linked. 'draw' arg(1) compile endif -- EVERSION < 4 defc draw universal boxtab1,boxtab2,boxtab3,boxtab4 universal g1,g2,g3,g4,g5,g6,g7,g8,g9,ga,gb compile if WANT_DBCS_SUPPORT universal ondbcs compile endif compile if EVERSION >= 5 universal draw_starting_keyset compile if EVERSION >= '5.21' universal cursor_mode compile endif if .keyset = 'DRAW_KEYS' then sayerror ALREADY_DRAWING__MSG return endif compile endif style=upcase(substr(arg(1),1,1)) if not length(style) or verify(style,"123456B/") then compile if WANT_DBCS_SUPPORT if ondbcs then sayerror DRAW_ARGS_DBCS__MSG else compile endif sayerror DRAW_ARGS__MSG compile if WANT_DBCS_SUPPORT endif compile endif compile if EVERSION < 5 setcommand 'Draw',6,1 compile endif return endif /* Pick characters from a packed string rather than if's, to save space. */ compile if WANT_DBCS_SUPPORT if ondbcs then all6=\23\5\2\4\3\1\21\22\25\6\16'+|+++++++-+'\11\11\11\11\11\11\11\11\11\11\11\14\14\14\14\14\14\14\14\14\14\14\20\20\20\20\20\20\20\20\20\20\20\26\26\26\26\26\26\26\26\26\26\26 else compile endif all6='┤│┐┘└┌┴┬├─┼╣║╗╝╚╔╩╦╠═╬+|+++++++-+███▀▀█▀██▀█╡│╕╛╘╒╧╤╞═╪╢║╖╜╙╓╨╥╟─╫' compile if WANT_DBCS_SUPPORT endif compile endif if style='/' then compile if EVERSION > 5 drawchars=copies(substr(arg(1),2,1),11) compile else drawchars=substr('',1,11,substr(arg(1),2,1)) /* 11 copies of 2nd char */ compile endif elseif style='B' then drawchars=substr('',1,11) else drawchars=substr(all6,11*style-10,11) endif ; LAM - changed assignments to a parse statement. Saved 140 bytes of .ex file. parse value drawchars with g1 +1 g2 +1 g3 +1 g4 +1 g5 +1 g6 +1 g7 +1 g8 +1 g9 +1 ga +1 gb boxtab1=g1||g2||g4||g5||g7||g9||gb boxtab2=g1||g2||g3||g6||g8||g9||gb boxtab3=g1||ga||g4||g3||g7||g8||gb boxtab4=g9||ga||g5||g6||g7||g8||gb compile if EVERSION < 5 if command_state() then cursor_data endif compile endif istate=insert_state(); if istate then insert_toggle compile if EVERSION >= '5.50' call fixup_cursor() compile endif endif compile if EVERSION < 5 sayerror DRAW_PROMPT__MSG loop k=getkey() /* Insert key toggles drawing; if insert is on, simply do the key. */ if insert_state() then executekey k; iterate; endif if k=left then draw_left() elseif k=right then draw_right() elseif k=up then draw_up() elseif k=down then draw_down() /* Allow a few other keys for minor editing. */ elseif k=backspace or k=' ' or k=home or k=end or k=del or k=ins then executekey k else /* All other keys simply exit draw. */ leave endif endloop if istate<>insert_state() then insert_toggle compile if EVERSION >= '5.50' call fixup_cursor() compile endif endif sayerror DRAW_ENDED__MSG compile else -- EPM: The old DRAW used a getkey() loop. We don't have getkey() in EPM. -- The new way: define a clear keyset of only the active keys. draw_starting_keyset = upcase(.keyset) keys draw_keys compile if EVERSION >= '5.21' cursor_mode = querycontrol(26) 'togglecontrol 26 0' compile endif -- Make it a BASE CLEAR keyset so the only keys that do anything are -- the ones we explicitly define. Without the CLEAR, the standard ASCII keys -- like 'a'-'z' would be automatically included. defkeys draw_keys base clear def left = if insert_state() then left else draw_left() endif def right = if insert_state() then right else draw_right() endif def up = if insert_state() then up else draw_up() endif def down = if insert_state() then down else draw_down() endif def backspace = rubout def ins = insert_toggle compile if EVERSION >= '5.50' call fixup_cursor() compile endif def space = keyin ' ' def home = begin_line def end = end_line def del = delete_char -- New in EPM. This event (pseudo-key) is triggered whenever an otherwise -- undefined key is pressed. We let any other key exit draw mode. -- (Any other key but mouse_move, that is. It's not considered an "other key" -- because the mouse movement is too sensitive. -- This new wrinkle isn't really required. We could define only one or two -- keys (like Esc) as exits and simply ignore all others. def otherkeys, F3 = -- or def Esc universal draw_starting_keyset compile if EVERSION >= '5.21' universal cursor_mode compile endif -- Whatever other key the user pressed, remember it so we can execute it. k = lastkey() -- Just in case the user doesn't have a select_edit_keys(), return to -- the standard keyset to make sure we don't get stuck in draw_keys. keys edit_keys .keyset = draw_starting_keyset -- Return to whatever keyset had been there. compile if EVERSION >= '5.21' 'togglecontrol 26' cursor_mode compile endif -- Execute the key the user pressed when he quit drawing. sayerror DRAW_ENDED__MSG if k<>esc & k<>c_I & k<>F3 then executekey k; endif -- But assume Esc was just to stop DRAW. -- End of EPM mods. ---------------------------------------------------------- compile endif defproc get_char universal linepos,colpos,target colpos=.col linepos=.line getline target return substr(target,.col,1) defproc draw_up /* draw logic for the up key */ universal last,l,r,u,d,boxtab1,linepos,colpos universal g1,g2,g3,g4,g5,g6,g7,g8,g9,ga,gb if last='d' then up else c=get_char() if last=='u' and c==' ' then keyin g2;left;up elseif not verify(c,boxtab1) then up elseif c==g3 then keyin g1;left;up elseif c==g6 then keyin g9;left;up elseif c==g8 then keyin gb;left;up elseif c==ga then call left_right() if l=1 and r=1 then keyin g7 elseif l=1 then keyin g4 else keyin g5 endif left;up else call left_right() if last='r' and l=1 then keyin g4 elseif last='l' and r=1 then keyin g5 else keyin g2 endif left;up endif if linepos=1 then insert; .col=colpos else c=get_char() if c==g4 then keyin g1;left elseif c==g5 then keyin g9;left elseif c==g7 then keyin gb;left elseif c==ga then call left_right() if l=1 and r=1 then keyin g8 elseif l=1 then keyin g3 else keyin g6 endif left endif endif endif last='u' defproc draw_down /* Draw logic for the Down key */ universal last,l,r,u,d,boxtab2,linepos,colpos universal g1,g2,g3,g4,g5,g6,g7,g8,g9,ga,gb if last='u' then down else c=get_char() if last=='d' and c==' ' then keyin g2;left;down elseif not verify(c,boxtab2) then down elseif c==g4 then keyin g1;left;down elseif c==g5 then keyin g9;left;down elseif c==g7 then keyin gb;left;down elseif c==ga then call left_right() if l=1 and r=1 then keyin g8 elseif l=1 then keyin g3 else keyin g6 endif left;down else call left_right() if last='r' and l=1 then keyin g3 elseif last='l' and r=1 then keyin g6 else keyin g2 endif left;down endif if linepos=.last then insert;.col=colpos else c=get_char() if c==g3 then keyin g1;left elseif c==g6 then keyin g9;left elseif c==g8 then keyin gb;left elseif c==ga then call left_right() if l=1 and r=1 then keyin g7 elseif l=1 then keyin g4 else keyin g5 endif left endif endif endif last='d' defproc left_right /* Check character left and right of cursor position */ universal last,l,r,boxtab3,boxtab4,lpos,rpos,target,colpos universal g1,g2,g3,g4,g5,g6,g7,g8,g9,ga,gb lpos=colpos-1 if lpos > 0 then l = substr(target,lpos,1) else l = ' ' endif rpos=colpos+1 if rpos < MAXCOL then r = substr(target,rpos,1) else r = ' ' endif l=not verify(l,boxtab4) /*if verify(l,boxtab4)==0 then l=1 else l=0 endif*/ r=not verify(r,boxtab3) /*if verify(r,boxtab3)==0 then r=1 else r=0 endif*/ defproc draw_left /* Draw logic for the Left key */ universal last,u,d,boxtab3 universal g1,g2,g3,g4,g5,g6,g7,g8,g9,ga,gb if last=='r' then left else c=get_char() compile if WANT_DBCS_SUPPORT if last=='l' and isdbcs(c) then keyin ga;keyin ga;left;left;left elseif last=='l' and c==' ' then keyin ga;left;left compile else if last=='l' and c==' ' then keyin ga;left;left compile endif elseif not verify(c,boxtab3) then left elseif c==g5 then keyin g7;left;left elseif c==g6 then keyin g8;left;left elseif c==g9 then keyin gb;left;left elseif c==g2 then call up_down() if u=1 and d=1 then keyin g1 elseif u=1 then keyin g4 else keyin g3 endif left;left else call up_down() if last='u' and d=1 then keyin g3 elseif last='d' and u=1 then keyin g4 else keyin ga endif left;left endif c=get_char() compile if WANT_DBCS_SUPPORT if isdbcs(c) then keyin ' ';c=get_char();endif compile endif if c==g4 then keyin g7;left elseif c==g2 then call up_down() if u=1 and d=1 then keyin g9 elseif d=1 then keyin g6 else keyin g5 endif left elseif c==g3 then keyin g8;left elseif c==g1 then keyin gb;left endif endif last='l' defproc draw_right /* Draw logic for the Right key */ universal last,u,d,boxtab4,colpos universal g1,g2,g3,g4,g5,g6,g7,g8,g9,ga,gb if last=='l' then right else c=get_char() if last=='r' and c==' ' then keyin ga else if not verify(c,boxtab4) then right elseif c==g4 then keyin g7 elseif c==g3 then keyin g8 elseif c==g1 then keyin gb elseif c==g2 then call up_down() if u=1 and d=1 then keyin g9 elseif d=1 then keyin g6 else keyin g5 endif else call up_down() if last='u' and d=1 then keyin g6 elseif last='d' and u=1 then keyin g5 else keyin ga endif endif call left_right() endif c=get_char() if c==g5 then keyin g7;left elseif c==g2 then call up_down() if u=1 and d=1 then keyin g1 elseif u=1 then keyin g4 else keyin g3 endif left elseif c==g6 then keyin g8;left elseif c==g9 then keyin gb;left endif endif last='r' if colpos = MAXCOL then left endif defproc up_down /* Check character above and below cursor position */ universal u,d,boxtab1,boxtab2,linepos,colpos,dpos,upos,target universal g1,g2,g3,g4,g5,g6,g7,g8,g9,ga,gb if linepos=1 then u=0 else upos=linepos-1 getline target,upos u = substr(target,colpos,1) u=not verify(u,boxtab2) endif dpos=linepos+1 if dpos > .last then d=' ' else getline target,dpos d = substr(target,colpos,1) endif d=not verify(d,boxtab1) getline target,linepos