OS/2 Professional Developers Kit 1992 November/Disc01/Disc01.mdf/prodtool/epm/help/epm.hlp

OS/2 Help File | 1992-09-07 | 126.2 KB | 4,642 lines

ΓòÉΓòÉΓòÉ 1. Enhanced Editor Product Help ΓòÉΓòÉΓòÉ

The Enhanced Editor is a text editor you can use to create and edit your text
files. It enables you to work on multiple files at the same time.

The Enhanced Editor begins with an empty edit window that you can enter text
into beginning at the cursor location.  After you have completed typing in your
text:

 1. Select File.
 2. Select Save as.
 3. Type a filename.

The Enhanced Editor has a number of features.  For details, select from the
list below:

o Starting the Enhanced Editor from an OS/2 command prompt
o Marking/Selecting text
o Issuing editor commands
o Recording keystrokes
o Configuring the mouse
o Direct file manipulation
o Stream versus line mode editing
o Edit ring


ΓòÉΓòÉΓòÉ 2. Enhanced Editor Keys Help ΓòÉΓòÉΓòÉ

The key definitions for the Enhanced Editor are divided into three groups:
Function Keys, which you use use to work with files and display help; Edit
Window Keys, which you use to move the cursor in the edit window; and Editing
Keys, which you use to display text editor keys.

For key definitions in each of these groups, select from the list below:

o Standard function keys
o Enhanced Editor edit window keys
o Enhanced Editor editing keys


ΓòÉΓòÉΓòÉ 2.1. Standard Function Keys ΓòÉΓòÉΓòÉ

F1
          Displays help.
F2
          Saves the current file.
F3
          Exits the current file.
F4
          Saves the current file.
F5
          Opens a new edit window.
F6
          Draws in the current file.
F7
          Renames the current file.
F8
          Edits a file.
F9
          Undo.
F10
          Switches between the menu bar and the file being edited.
F11
          Switches to the previous file in the edit ring.
F12
          Switches to the next file in the edit ring.


ΓòÉΓòÉΓòÉ 2.2. Edit Window Keys ΓòÉΓòÉΓòÉ

Alt+F4
          Closes the edit window.
Alt+F7
          Moves the edit window.
Alt+F8
          Sizes the edit window.
Alt+F9
          Minimizes the edit window.
Alt+F10
          Maximizes the edit window.
Shift+F1
          Scrolls the screen left one column.
Shift+F2
          Scrolls the screen right one column.
Shift+F3
          Scrolls the screen down one row.
Shift+F4
          Scrolls the screen up one row.
Shift+F5
          Scrolls the screen so that the line at the current cursor position is
          vertically centered.
End
          Moves the cursor to the end of the line.
Home
          Moves the cursor to the beginning of the line.
PgDn
          Moves the line at the current cursor position forward (down) one
          screen.
PgUp
          Moves the line at the current cursor position backward (up) one
          screen.
Tab
          Moves the cursor to the next tab stop.
Shift+Tab
          Moves the cursor to the previous tab stop.


ΓòÉΓòÉΓòÉ 2.3. Editing Keys ΓòÉΓòÉΓòÉ

Alt+F1
          Inserts a list of various graphic characters at the current cursor
          position.
Alt+A
          Adjusts the mark.
Alt+B
          Marks the current cursor position.
Alt+C
          Copies the marked text.
Alt+D
          Deletes the current mark.
Alt+E
          Moves the cursor to the end of the current mark.
Alt+F
          Prompts you for a character and fills the current mark with the
          specified character.
Alt+J
          Joins the next line with line at the current cursor position,
          separated by a space.
Alt+L
          Marks the line at the current cursor position.
Alt+M
          Moves the current mark.
Alt+N
          Types the current file name at the current cursor position.
Alt+O
          Overlay the current mark.
Alt+P
          Reformats the paragraph, starting at the current cursor position,
          using the current margins.
Alt+R
          Reformats a marked block of text to a new set of margins.
Alt+S
          Splits the line at the current cursor position.
Alt+T
          Centers the text within the current mark (or margins, if no mark).
Alt+U
          Removes the current mark.
Alt+W
          Marks the word at the current cursor position using a block mark.
Alt+Y
          Moves the cursor to the beginning of the current mark.
Alt+Z
          Marks the current character.
Alt+1
          Edits the file name on the line at the current cursor position.
Alt+0
          Executes the line at the current cursor position, or all lines within
          the line at the current cursor position mark.
Alt+=
          Executes the line at the current cursor position, or all lines within
          the line at the current cursor position mark.
Ctrl+F1
          Converts current word to uppercase.
Ctrl+F2
          Converts current word to lowercase.
Ctrl+F3
          Converts marked text to uppercase.
Ctrl+F4
          Converts marked text to lowercase.
Ctrl+F5
          Moves the cursor to the beginning of the current word.
Ctrl+F6
          Moves the cursor to the end of the current word.
Ctrl+F7
          Moves marked text to the left one column.
Ctrl+F8
          Moves marked text to the right one column.
Ctrl+C
          Repeats the last CHANGE command.
Ctrl+D
          Erases from the current cursor position to the beginning of the next
          word.
Ctrl+E
          Erases from the current cursor position to the end of the line.
Ctrl+F
          Repeats the last LOCATE command.
Ctrl+I
          Displays the Enhanced Editor command line.
Ctrl+L
          Copies the line at the current cursor position to the command line.
Ctrl+M
          Inserts a blank line after the current cursor position.
Ctrl+Q
          Switches between the search file and the results of the ALL command.
Ctrl+R
          Starts and stops recording keystrokes.
Ctrl+T
          Plays back a set of recorded keystrokes.
Ctrl+2
          Types an ASCII 0 (NUL character).
Ctrl+6
          Types a '╨║'.
Ctrl+9
          Types a '{' (left brace).
Ctrl+0
          Types a '}' (right brace).
Ctrl+Backspace
          Deletes the current line.
Ctrl+Enter
          Moves cursor to the beginning of the next line.
Ctrl+Left
          Moves the cursor to the beginning of the word.
Ctrl+Right
          Moves the cursor to the beginning of the next word.
Del
          Deletes the character at the current cursor position.
Ins
          Switches between insert and replace modes.


ΓòÉΓòÉΓòÉ 3. Mark Types ΓòÉΓòÉΓòÉ

There are three types of marked or selected text:  Block, Line, and Character.
Advanced mode uses all three types, while basic mode uses only Character marks.
A detailed description about how to mark or select each type follows:

Block
          A block mark is a rectangular area of text.  To mark a block:

    1. Position the cursor in the upper-right corner of the desired block.
    2. Press Alt+B.
    3. Position the cursor in the lower left corner of the desired block.
    4. Press Alt+B.

       Note:  When you delete a block of text, the text is erased but the space
              that contained the text remains in the file -it is not closed. To
              close the space, you must use a line or character mark to delete
              the text.


Line
          A line mark is a mark of a line or a set of lines.  To mark the line:

    1. Position the cursor in the first line to be marked.
    2. Press Alt+L.
    3. Position the cursor in the last line to be marked.
    4. Press Alt+L.
Character
          A character mark is a mark of a character or set of characters. To
          mark characters:

    1. Position the cursor in the first character to be marked.
    2. Press Alt+Z.
    3. Position the cursor in the last character to be marked.
    4. Press Alt+Z.

Related Information:

Mark Operations


ΓòÉΓòÉΓòÉ 4. Mark Operations ΓòÉΓòÉΓòÉ

There are several mark operations that can be performed.  The most frequently
performed options and their key combinations are listed below:

Alt+A (Adjust Mark)
          Copies the marked text, overlaying the text starting at the current
          cursor position and filling the original text position with blanks.
Alt+C (Copy Mark)
          Copies the marked text to the current cursor position.  The original
          text remains in its position. With line marks, the marked lines are
          copied after the line the cursor is on.
Alt+D (Delete Mark)
          Deletes the marked text from the file.
Alt+E (End Mark)
          Moves the cursor to the end of the mark.  If the mark is a line mark,
          the column position of the cursor is preserved.
Alt+M (Move Mark)
          Moves the marked text from its current position to the cursor
          position, as in the Copy Mark command.
Alt+O (Overlay Mark)
          Overwrites the text at the current cursor position with a copy of the
          marked text.
Alt+T (Center Mark)
          Centers the text within the mark.
Alt+U (Unmark)
          Unmarks any mark within the current ring.
Alt+Y (Begin Mark)
          Moves the cursor to the beginning of the mark.  If the mark is a line
          mark, the column position of the cursor is preserved.


ΓòÉΓòÉΓòÉ 5. Recording Keystrokes ΓòÉΓòÉΓòÉ

With the Enhanced Editor you can record a set of keystrokes to be played back
at a later time.  This is helpful if you are performing a particular action
repeatedly.

To record keystrokes:

 1. Press Ctrl+R to start recording.
 2. Type the keys that you want recorded.
 3. Press Ctrl+R to stop recording.

Press Ctrl+T to playback the recorded keystrokes.

For example, suppose you type DIR to get a directory listing of the current
directory.

 Volume in drive C is MYDISK
 The Volume Serial Number is 0123:4567
 Directory of C:\TCPIP\LAMAIL

ALL          <DIR>      1-01-90  12:01a
ALL      NDX       87   1-01-90  12:01a
OUT          <DIR>      1-01-90  12:01a
OUT      NDX       87   1-01-90  12:01a
PERSONAL     <DIR>      1-01-90  12:01a
PERSONAL NDX       87   1-01-90  12:01a
STUFF        <DIR>      1-01-90  12:01a
STUFF    NDX       87   1-01-90  12:01a
MORESTUF     <DIR>      1-01-90  12:01a
MORESTUF NDX       87   1-01-90  12:01a

You wish to convert all of the file names from the "DIR" format to the
"name.ext" format.

After deleting all lines but the files (not subdirectories) and the file
information (show size, date, and time), you have left:

ALL      NDX
OUT      NDX
PERSONAL NDX
STUFF    NDX
MORESTUF NDX

Place your cursor at the beginning of the first line and press Ctrl+R to start
recording. Press the following keys:

 1. Ctrl+F6
 2. Right "."
 3. Alt+B
 4. Ctrl+Right
 5. Left
 6. Alt+B
 7. Alt+D
 8. Down
 9. Home
10. Ctrl+R
You have recorded the keystrokes to convert one file name.  Now press Ctrl+T
twice to playback the keystrokes, and the files are converted.

There are a total of five files.

ALL.NDX
OUT.NDX
PERSONAL.NDX
STUFF.NDX
MORESTUF.NDX


ΓòÉΓòÉΓòÉ 6. Configuring the Mouse ΓòÉΓòÉΓòÉ

You can configure the mouse in either the basic marking mode or the advanced
marking mode.  The default is the basic marking mode.  In the basic marking
mode, the mark is only usable for deleting text or copying it to the clipboard
Typing any text character deletes the marked text and replaces it with the
entered character.  The basic marking mode mouse actions are:

Button 1 click
          Move cursor position to mouse pointer and unmark.
Button 1 + Shift
          Mark text from cursor position to mouse pointer.
Button 1 click and drag
          Mark text as you drag.
Button 1 double-click
          Move cursor position to mouse pointer and mark the word.

In advanced marking mode, a mark stays until you explicitly delete it or
unmark.  The advanced marking mode mouse actions are:

Button 1 click
          Move cursor position to mouse pointer.
Button 1 + Shift
          Mark text from cursor position to mouse pointer.
Button 1 click and drag
          Block mark text as you drag.
Button 2 click and drag
          Line mark text as you drag. If you start dragging inside a marked
          region, this will instead initiate a drag of the marked text.  The
          text will be moved (or copied, if the Ctrl key is pressed as well) to
          wherever you drop it.
Button 1 + Ctrl + drag
          Character mark text as you drag.
Button 1 double-click
          Unmark text.
Button 2 double-click
          Move cursor position to mouse pointer and mark the word.

To select advanced marking mode:

 1. Select Options.
 2. Select Preferences.
 3. Select Advanced marking.

To save the mark mode setting:

 1. Select Options.
 2. Select Save options.

Related Information:

o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 7. Direct File Manipulation with the File Symbol ΓòÉΓòÉΓòÉ

The File symbol is located in the top left corner of the edit window. It looks
like a sheet of paper with the top right corner folded down. It can be used to:

o Print the visible file.
o Copy a file to another edit window.
o Create another edit window containing your file.
o Copy files to an open file directory folder.

The File symbol is manipulated in the following way:

Select the File symbol by pointing to it with the mouse pointer and pressing
button 2.  Keeping button 2 down, move the mouse pointer over one of the
following:

o An Enhanced Editor edit window, to copy the file.
o The Enhanced Editor icon, to create another edit window containing your file.
o An open directory, to copy the file to that directory.


ΓòÉΓòÉΓòÉ 8. Help for Search ΓòÉΓòÉΓòÉ

Use this window to search for a string of text or search for and replace a
string of text.

To search for text:

 1. Type the search_string in the Search field.
 2. Select Find to search for text.  Find can be selected multiple times to
    find successive occurrences of the search string.
 3. Select Cancel to close the window.

To replace a string of text:

 1. Type the search_string in the Search field.
 2. Type the replace_string that will replace the search_string in the Replace
    field.
 3. Select either:

   o Change to find the next occurrence of the search_string and change it to
     the replace_string.
   o Change, then find, to do the same as Change, and then search for the next
     occurrence of the search_string after the change has been made.

Note:  The search begins from the current cursor position.  The entire file is
       searched only if the cursor is at the beginning of the first line.

 Related Information:

o Search
o Replace
o Options
o Find
o Change
o Change, then find
o Find, cancel
o Cancel


ΓòÉΓòÉΓòÉ 9. Help for Search ΓòÉΓòÉΓòÉ

Type in the Search filed the text you want to find.  The text you type is
called the search_string.


ΓòÉΓòÉΓòÉ 10. Help for Replace ΓòÉΓòÉΓòÉ

Type in the Replace field the text you want to put in place of the text in the
Search field.  The text in the Replace field is called the replace_string.


ΓòÉΓòÉΓòÉ 11. Help for Options ΓòÉΓòÉΓòÉ

You can choose any of the following options:

Ignore case
          Ignores case in the search_string.  For example, "Search", "search",
          and "SEARCH" are treated the same.
Reverse search
          Searches from the current cursor position to the beginning of the
          file.
Change all occurrences
          Causes all occurrences of the search_string to be overwritten by the
          replace_string.
Marked area
          Searches only the marked text.
Grep
          Searches using the GREP option.


ΓòÉΓòÉΓòÉ 12. Help for Find ΓòÉΓòÉΓòÉ

Select Find to locate the search_string within the current file.


ΓòÉΓòÉΓòÉ 13. Help for Change ΓòÉΓòÉΓòÉ

Select Change to replace the found text with the replace_string.


ΓòÉΓòÉΓòÉ 14. Help for Change, then Find ΓòÉΓòÉΓòÉ

Select Change, then find to replace the first occurrence of the found text with
the replace_string and then find the next occurrence of the search_string


ΓòÉΓòÉΓòÉ 15. Help for Find, Cancel ΓòÉΓòÉΓòÉ

Select Find, cancel to search for the first occurrence of the search_string and
then exit the Search window.


ΓòÉΓòÉΓòÉ 16. Help for Command ΓòÉΓòÉΓòÉ

Use this window to type editor commands.  To enter a command:

 1. Select a command from the selection list or type a command in the entry
    field.
 2. Select OK.

As you type a command, the editor will attempt to match what you're typing with
an existing line in the selection list. At any point you can press Ctrl+O to
select the matched line in the list, or Ctrl+F to find the next matching line.
Ctrl+Backspace will delete the line from the list.

Note:  Commands in the selection list are saved between sessions of the editor.

 Related Information:

o Editor commands
o OK
o Cancel


ΓòÉΓòÉΓòÉ 17. Help for Messages ΓòÉΓòÉΓòÉ

Use this window to display or review error messages.

Select an error message from the selection list to have it displayed in the
entry field. The message can be marked and copied from the entry field to the
clipboard.

Related Information:

o Cancel


ΓòÉΓòÉΓòÉ 18. Help for Describe Error ΓòÉΓòÉΓòÉ

The list displays all errors associated with the current line.  The following
options are available:

Details
          Displays a help panel giving additional information on the error
          message, if this information was provided by the compiler vendor.
Cancel
          Returns control to the edit window.
Help
          Displays this panel.


ΓòÉΓòÉΓòÉ 19. Help for Tabs ΓòÉΓòÉΓòÉ

To set the edit window tabs:

 1. Type the tab settings.  You can type either a single number to use as an
    increment, or you can type a series of numbers separated by a space that
    will be used as column positions.  In both cases, column one is used as a
    starting point.
 2. Select Set or Apply.

For a detailed explanation of each field, select from the list below:

o Set
o Apply
o Defaults
o Cancel


ΓòÉΓòÉΓòÉ 20. Help for Margins ΓòÉΓòÉΓòÉ

Use this window to set the left, right, and paragraph margins.  For each
setting, drag the slider arm, select the left or right slider button, or type a
new value.  Then select Set or Apply.

For a detailed explanation of each field, select from the list below:

o Margins
o Set
o Apply
o Defaults
o Cancel


ΓòÉΓòÉΓòÉ 21. Help for Margins ΓòÉΓòÉΓòÉ

The left and right margins control where the cursor is positioned when typing
text.  If you type beyond the right margin, the word you are typing is moved to
a new line starting at the left margin.

When you reformat a paragraph, it is justified so that all lines are between
the left margin and the right margin, except the first line, which starts at
the paragraph margin.

Related Information:

Reformatting a paragraph


ΓòÉΓòÉΓòÉ 22. Help for Colors ΓòÉΓòÉΓòÉ

Use this window to set the colors used by the editor.  To change colors:

 1. Select a field from the Field selection selection list.
 2. Select the Set background or Set foreground radio button.
 3. Select a color from the Color selection selection list.
 4. Select Set or Apply.

Note:  As you change colors, Sample Text will reflect your changes.

For a detailed explanation of each field, select from the list below:

o Field selection
o Color selection
o Set background
o Set foreground
o Set
o Apply
o Defaults
o Cancel


ΓòÉΓòÉΓòÉ 23. Help for Field Selection ΓòÉΓòÉΓòÉ

Use Field selection to select the field you want to change. The four fields
that you can choose from are:

Text
          Color of normal text.
Mark
          Color of a marked area.
Status
          Color of the status line, if enabled, containing the line and column
          numbers.
Message
          Color of the message line, if enabled, and the color in which
          messages will be displayed.


ΓòÉΓòÉΓòÉ 24. Help for Color Selection ΓòÉΓòÉΓòÉ

Use Color selection to select the color that you want to paint the selected
field.  Select the color you want from the selection list.


ΓòÉΓòÉΓòÉ 25. Help for Set Background ΓòÉΓòÉΓòÉ

Select the Set background radio button to color the background of the selected
field with the selected color.


ΓòÉΓòÉΓòÉ 26. Help for Set Foreground ΓòÉΓòÉΓòÉ

Select the Set Foreground radio button to color the foreground of the selected
field with the selected color.


ΓòÉΓòÉΓòÉ 27. Help for Paths ΓòÉΓòÉΓòÉ

To enter paths:

 1. Type an autosave path.
 2. Type a temporary path.
 3. Select Set or Apply.

For a detailed explanation of each field, select from the list below:

o Autosave path
o Temporary path
o Set
o Apply
o Defaults
o Cancel


ΓòÉΓòÉΓòÉ 28. Help for Paths ΓòÉΓòÉΓòÉ

To enter paths:

 1. Type an autosave path.
 2. Type a temporary path.
 3. Type a dictionary path and file name.
 4. Type a personal dictionary path and file name.
 5. Select Set or Apply.

For a detailed explanation of each field, select from the list below:

o Autosave path
o Temporary path
o Dictionary file
o Personal dictionary
o Set
o Apply
o Defaults
o Cancel


ΓòÉΓòÉΓòÉ 29. Help for Autosave Path ΓòÉΓòÉΓòÉ

The subdirectory in which autosave files are stored.

Note:  If you select a temporary disk, your autosave files will be lost if the
       system loses power while you are updating a file.

Do not select a temporary disk because they only exist until you reboot, and
while power is not interrupted.

Note:  If you do not specify an autosave path, the current directory is used.


ΓòÉΓòÉΓòÉ 30. Help for Temporary Path ΓòÉΓòÉΓòÉ

Use Temporary paths to select the directory where temporary files are created.

This directory should be a temporary disk, if you have one with room to spare,
both for speed and so you don't have to explicitly erase the files.  A
temporary disk exists only until you reboot, and while power is not
interrupted.

Note:  If you do not specify a temporary path, the current directory is used.


ΓòÉΓòÉΓòÉ 31. Help for Dictionary File ΓòÉΓòÉΓòÉ

Use Dictionary file to specify the path and file name of the file to be used
for spell checking.


ΓòÉΓòÉΓòÉ 32. Help for Personal Dictionary ΓòÉΓòÉΓòÉ

Use Personal dictionary to specify where your personal dictionary addenda
exists or should be created.  Your personal dictionary addenda file is used
during the proof function.


ΓòÉΓòÉΓòÉ 33. Help for Autosave ΓòÉΓòÉΓòÉ

Use this window to control the number of modifications that are required to be
made to a file before it is automatically saved.  Set the number to 0 to turn
off the autosaving feature.

For a detailed explanation of each field, select from the list below:

o Autosave
o Set
o Apply
o Defaults
o Cancel


ΓòÉΓòÉΓòÉ 34. Help for Autosave ΓòÉΓòÉΓòÉ

Use Autosave to specify the number of changes that have to be made to a file
before it is automatically saved.  To specify the number, select the slider
button, drag the slider arm, or type a new value in the field.


ΓòÉΓòÉΓòÉ 35. Help for Fonts ΓòÉΓòÉΓòÉ

To change the editor fonts:

 1. Select Font name.
 2. Select Size.
 3. Select any of the following attributes by selecting the symbol that
    corresponds to the desired feature:

   o Bold
   o Italic
   o Underlined
   o Strikeout

 4. Select Set or Apply.

As you change fonts, Sample Text will change to show you what the font and
attributes look like.

For a detailed explanation of each field, select from the list below:

o Font name
o Size
o Set
o Apply
o Defaults
o Cancel


ΓòÉΓòÉΓòÉ 36. Help for Font Name ΓòÉΓòÉΓòÉ

Use Font name to specify the font you want to use.  Select the arrow to the
right to display the entire selection list; then select the font that you want.


ΓòÉΓòÉΓòÉ 37. Help for Size ΓòÉΓòÉΓòÉ

Use Size to adjust the size of the font.  Select the arrow to the right to
display the entire selection list; then select the font size that you want.


ΓòÉΓòÉΓòÉ 38. Help for Keys ΓòÉΓòÉΓòÉ

To define an action for the Enter key:

 1. Select a key or key combination from the top selection list.
 2. Select an action from the bottom selection list.
 3. Select Set or Apply

For a detailed explanation of each field, select from the list below:

o Set
o Apply
o Defaults
o Cancel


ΓòÉΓòÉΓòÉ 39. Help for Set ΓòÉΓòÉΓòÉ

Select Set to save the settings and have them used every time you open an edit
window.


ΓòÉΓòÉΓòÉ 40. Help for Apply ΓòÉΓòÉΓòÉ

Select Apply to use the selected settings in the current edit window, without
making them permanent.


ΓòÉΓòÉΓòÉ 41. Help for Defaults ΓòÉΓòÉΓòÉ

Select Defaults to set the values to the initial system settings.


ΓòÉΓòÉΓòÉ 42. Help for Cancel ΓòÉΓòÉΓòÉ

Select Cancel to close the notebook and discard any changes that were made.


ΓòÉΓòÉΓòÉ 43. Help for Quitting a File ΓòÉΓòÉΓòÉ

Use Quitting a File to end an editing session before a modified file is removed
from the edit window ring.  The following options are available:

Save
          Saves the file as it appears in the entry field.  The file name can
          be modified before Save is selected.
Discard
          Enables the quitting process to continue.  Changes to the file are
          not saved.
Cancel
          Returns control to the edit window.

Note:  When all files have been removed from the edit window ring, the edit
       window is automatically closed.


ΓòÉΓòÉΓòÉ 44. Help for Closing a File ΓòÉΓòÉΓòÉ

Use Closing a File to end an editing session before a modified file is removed
from the edit window ring.  The following options are available:

Save
          Saves the file as it appears in the entry field.  The file name can
          be modified before Save is selected.
Discard
          Enables the quitting process to continue.  Changes to the file are
          not saved.
Cancel
          Returns control to the edit window.

Note:  When all files have been removed from the edit window ring, the edit
       window is automatically closed.


ΓòÉΓòÉΓòÉ 44.1. Help for Proof ΓòÉΓòÉΓòÉ

The Proof window is displayed when a possibly misspelled word is found during
the proof function.  This window contains a list words.  The window buttons are
as follows:

Replace
          The highlighted word from the list is placed inside your document,
          replacing the misspelled word.  The replace function can also be
          achieved by double-clicking on a word in the list.  Replace is the
          default.
Cancel
          Terminates the proof function.
Next
          Skips the highlighted word and continues spell checking.
Temp. Add
          The word that is highlighted is placed in a temporary personal
          dictionary file.  Every other occurrence of that word is considered
          correct during the remainder of your proof session.
Add
          The word that is highlighted is placed in your personal dictionary
          file.  The word is permanently considered correct.
Edit
          Places the word that is highlighted in an entry field, where you can
          modify it.
Help
          Displays this panel.


ΓòÉΓòÉΓòÉ 44.2. Help for Proof Word ΓòÉΓòÉΓòÉ

The Proof Word window is displayed when a possibly misspelled word is found
during the execution of the proof word function.  This window contains a list
box which holds a selection of possible correct words. The window buttons are
as follows:

Replace
          The highlighted word from the list is placed inside your document,
          replacing the misspelled word.  The replace function can also be
          achieved by double clicking on a word in the list.  Replace is the
          default button.
Cancel
          Terminates the proof function.
Add
          The word that is highlighted is placed in your personal dictionary
          file.  The word is permanently considered correct.
Help
          Displays this panel.


ΓòÉΓòÉΓòÉ 44.3. Help for Synonym ΓòÉΓòÉΓòÉ

The Synonym window is displayed if one or more synonyms are found during the
execution of the synonym function.  This window contains a list box which holds
a selection of words.  The window buttons are as follows:

Replace
          The highlighted word from the list is placed inside your document,
          replacing the highlighted word.  The replace function can also be
          achieved by double clicking on a word in the list. Replace is the
          default button.
Cancel
          Terminates the proof function.
Help
          Displays this panel.


ΓòÉΓòÉΓòÉ 45. Help for Undo ΓòÉΓòÉΓòÉ

The number range represents changes made to the current file.  The lower the
number the earlier the change.

To use Undo:

 1. Move the slider to the change that you want to undo.
 2. Select OK.


ΓòÉΓòÉΓòÉ 46. Help for List Ring ΓòÉΓòÉΓòÉ

The selection list contains a list of all files in the current edit ring.

To select a file from the list:

 1. Select a file from the selection list to activate it.
 2. Select Switch to.

Related Information:

o Switch to
o Cancel


ΓòÉΓòÉΓòÉ 47. Help for Switch To ΓòÉΓòÉΓòÉ

Select Switch to to exit the window, and make the selected file the current
file.


ΓòÉΓòÉΓòÉ 48. Help for Cancel ΓòÉΓòÉΓòÉ

Select Cancel to exit the window and leave the original file as the current
file.


ΓòÉΓòÉΓòÉ 49. Help for Style ΓòÉΓòÉΓòÉ

Use Style to apply a style, consisting of a specific font, color, or both to a
marked region of text.  You can select an existing style in the Style name
field, or you can define a new style by doing the following:

 1. Optionally, type a new name in the Style name field.
 2. Select Font name.
 3. Select Size.
 4. Select any of the following attributes, if desired:

   o Bold
   o Italic
   o Underlined
   o Strikeout
   o Outline.

 5. Select Foreground color
 6. Select Background color to change the background color.
 7. Select Set to apply the selected style to the marked region, or Register to
    register the style and continue in the window.

As you change font and colors, Sample Text changes to show you what the style
looks like.

Note:  If you do not enter a name in the Style name field, you can only apply
       the style to the marked text.  The style will not be registered.

For a detailed explanation of each field, select from the list below:

o Style name
o Font name
o Font size
o Font attributes
o Foreground color
o Background color
o Color selection
o Set
o Register
o Cancel


ΓòÉΓòÉΓòÉ 50. Help for Style Name ΓòÉΓòÉΓòÉ

Use Style name to select the existing style you want to use, or to enter a new
style name.  Select the arrow to the right to display the entire selection
list; then select the style that you want.


ΓòÉΓòÉΓòÉ 51. Help for Font Name ΓòÉΓòÉΓòÉ

Use Font name to specify the font you want to use.  Select the arrow to the
right to display the entire selection list; then select the font that you want.


ΓòÉΓòÉΓòÉ 52. Help for Font Size ΓòÉΓòÉΓòÉ

Use Font Size to adjust the size of the font.  Select the arrow to the right to
display the entire selection list; then select the font that you want.


ΓòÉΓòÉΓòÉ 53. Help for Font Attributes ΓòÉΓòÉΓòÉ

Select any of the following attributes by selecting the symbol that corresponds
to the desired feature:

o Bold
o Italic
o Underlined
o Strikeout
o Outline


ΓòÉΓòÉΓòÉ 54. Help for Background Color ΓòÉΓòÉΓòÉ

Select the Background color radio button to color the background of the
selected style.


ΓòÉΓòÉΓòÉ 55. Help for Foreground Color ΓòÉΓòÉΓòÉ

Select the Foreground color radio button to color the foreground of the
selected style.


ΓòÉΓòÉΓòÉ 56. Help for Color Selection ΓòÉΓòÉΓòÉ

Use this listbox to select the color that you want to paint the selected style.
Select the color you want from the selection list.


ΓòÉΓòÉΓòÉ 57. Help for Set ΓòÉΓòÉΓòÉ

Select Set to use the selected settings on the current text.

Note:  If a name was entered in the Style name field, the style will
       automatically be registered if it did not exist previously.


ΓòÉΓòÉΓòÉ 58. Help for Register ΓòÉΓòÉΓòÉ

Select Register to save the style settings under the name in the Style name
field.


ΓòÉΓòÉΓòÉ 59. Help for Cancel ΓòÉΓòÉΓòÉ

Select Cancel to close the dialog and discard any changes that were made.


ΓòÉΓòÉΓòÉ 60. Help for Set Bookmark ΓòÉΓòÉΓòÉ

To set a bookmark:

 1. Type a name in the entry field.
 2. Select Set or Set permanent.

For a detailed explanation of each field, select from the list below:

o Set
o Set permanent
o Cancel


ΓòÉΓòÉΓòÉ 61. Help for Set ΓòÉΓòÉΓòÉ

Select Set to set a bookmark that lasts for the duration of your edit session.


ΓòÉΓòÉΓòÉ 62. Help for Set Permanent ΓòÉΓòÉΓòÉ

Select Set permanent to set a bookmark that is saved with the file and loaded
the next time the file is edited.


ΓòÉΓòÉΓòÉ 63. Help for List Bookmarks ΓòÉΓòÉΓòÉ

To go to a bookmark:

 1. Use the down arrow to the right to display the selection list; then select
    a bookmark.
 2. Select Go to mark.

To delete a bookmark:

 1. Use the down arrow to the right to display the selection list; then select
    a bookmark.
 2. Select Delete mark.

For a detailed explanation of each field, select from the list below:

o Go to mark
o Delete mark
o Cancel


ΓòÉΓòÉΓòÉ 64. Help for Go To Mark ΓòÉΓòÉΓòÉ

Select Go to mark to position the cursor at the bookmark in the current file.


ΓòÉΓòÉΓòÉ 65. Help for Delete Mark ΓòÉΓòÉΓòÉ

Select Delete mark to erase the bookmark from the current file.


ΓòÉΓòÉΓòÉ 66. Adding and Inserting Text ΓòÉΓòÉΓòÉ

When the cursor is in insert mode, the text you type is inserted to the left of
the cursor and no text is overwritten.

To change the cursor to replace mode so that characters in the text are
overwritten:

 1. Position the cursor where you want to begin typing.
 2. Press the Insert (Ins) key.
 3. Type the new characters to overwrite text.


ΓòÉΓòÉΓòÉ 67. Restoring Text ΓòÉΓòÉΓòÉ

To cancel your last action or restore text:

 1. Select Edit.
 2. Select Undo.


ΓòÉΓòÉΓòÉ 68. Finding Text ΓòÉΓòÉΓòÉ

To find or change text in a file:

 1. Select Search.
 2. Select Search.

For additional help, select Help after the window is displayed.


ΓòÉΓòÉΓòÉ 69. Closing Files ΓòÉΓòÉΓòÉ

To close or exit a file:

 1. Select File.
 2. Select Quit.


ΓòÉΓòÉΓòÉ 70. Copying Text ΓòÉΓòÉΓòÉ

You copy text by using the Copy and Paste choices on the Edit menu.

To copy text from one file to another file or to another place in the same
file:

 1. Select the text to be copied.
 2. Select Edit.
 3. Select Copy.
 4. Move the cursor to the point in the file where you want to place this text.
 5. Select Edit.
 6. Select Paste.

Related Information:

Selecting text


ΓòÉΓòÉΓòÉ 71. Deleting Selected Text ΓòÉΓòÉΓòÉ

To delete selected text from a file:

 1. Select the text to be deleted.
 2. Select Edit.
 3. Select Delete mark.

Related Information:

Selecting text


ΓòÉΓòÉΓòÉ 72. Deleting Text ΓòÉΓòÉΓòÉ

To delete text, you can use one of the following:

o The delete (Del) key to delete the character to the right of the cursor. In
  the basic marking mode, the Del key will delete all of the marked text if a
  mark exists.
o The Backspace key to delete the character to the left of the cursor.
o The Ctrl+Backspace key to delete the current line.

Related Information:

Selecting text


ΓòÉΓòÉΓòÉ 73. Marking/Selecting Text ΓòÉΓòÉΓòÉ

To select (mark) text in basic marking mode:

 1. Move the mouse pointer to the left of the first character to be selected.
 2. Press and hold mouse button 1, and then drag the cursor to the right of the
    last character to be selected.
 3. Release mouse button 1.

To deselect text (remove the mark), do one of the following:

o Press mouse button 1 once within the text area.
o Select Edit; then Unmark.

Related Information:

o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 74. Opening Existing Files ΓòÉΓòÉΓòÉ

To open an existing file:

 1. Select File.
 2. Select Open.

For additional help, select Help after the window is displayed.


ΓòÉΓòÉΓòÉ 75. Entering Text ΓòÉΓòÉΓòÉ

To enter text:

 1. Position the cursor by clicking the mouse button where you want to begin
    typing.
 2. Press Enter to start a new line.
 3. Press the Spacebar to move the cursor to a place where there is no text.
 4. Use the arrow keys or mouse pointer to move the cursor to any area of text.

The cursor moves one space to the right every time you type a character or
press the Spacebar.


ΓòÉΓòÉΓòÉ 76. Pasting or Inserting Text ΓòÉΓòÉΓòÉ

To insert text into a file that you have cut or copied to the clipboard:

 1. Move the cursor to the point in the file where you want to insert the text.
 2. Select Edit.
 3. Select Paste.


ΓòÉΓòÉΓòÉ 77. Joining Lines ΓòÉΓòÉΓòÉ

To join lines, press Alt+J, or (in stream editing mode):

 1. Press the End key to move the cursor to the end of the line.
 2. Press the Del key.

The text from the line below joins the current line at the right of the cursor.


ΓòÉΓòÉΓòÉ 78. Moving Text ΓòÉΓòÉΓòÉ

You move text by using the Copy and Paste choices on the Edit menu.

To move text from one file to another file, or to a different place in the same
file:

 1. Select the text to be moved.
 2. Select Edit.
 3. Select Cut.  This places the text you cut on the clipboard.
 4. Move the cursor to the point in the file where you want to place this text.
 5. Select Edit.
 6. Select Paste.
or, in advanced marking mode, you can press Alt+M to move the marked text
within the current edit window without affecting the clipboard.

Related Information:

Selecting text


ΓòÉΓòÉΓòÉ 79. Splitting Lines ΓòÉΓòÉΓòÉ

To split a line, press Alt+S, or (in stream editing mode):

 1. Position the cursor where you want to divide the text to start a new line.
 2. Press Enter.

The text from the cursor to the end of the line is moved to the next line.


ΓòÉΓòÉΓòÉ 80. Printing Files ΓòÉΓòÉΓòÉ

To print a file:

 1. Select File.
 2. Select Print file.


ΓòÉΓòÉΓòÉ 81. Reformatting Text ΓòÉΓòÉΓòÉ

To reflow the text in the editing area so that any text extending beyond the
margin is moved to the next line:

 1. Position the cursor to the right of the character where you want to start
    reformatting.
 2. Press Alt+P.


ΓòÉΓòÉΓòÉ 82. Saving Files ΓòÉΓòÉΓòÉ

To save a file and continue editing it:

 1. Select File.
 2. Press Save.

If you need help, highlight the Save choice on the File menu and press F1.


ΓòÉΓòÉΓòÉ 83. Naming Files ΓòÉΓòÉΓòÉ

To name a file or change the name of a file:

 1. Select File.
 2. Press Rename.

Note:  This only changes the name within the editor, and does not affect any
       copy of the file previously saved.


ΓòÉΓòÉΓòÉ 84. Issuing Editor Commands ΓòÉΓòÉΓòÉ

To issue or process an editor command:

 1. Select Command.
 2. Select Command dialog.
 3. Type the command.
 4. Select OK.

For additional help, select Help after the window is displayed.

For a complete list of editor commands, select Editor commands below.

Related Information:

Editor commands


ΓòÉΓòÉΓòÉ 85. Setting Margins ΓòÉΓòÉΓòÉ

To set the margins:

 1. Select Options.
 2. Select Preferences.
 3. Select Settings.
 4. Select the Margins tab on the Settings notebook.


ΓòÉΓòÉΓòÉ 86. Help for Open ΓòÉΓòÉΓòÉ

Use this window to open a new edit window, following these steps:

 1. Select the down arrow to the right of the Drive list to display all the
    drives on your system.
 2. Select a drive from the Drive list.
 3. Select a directory from the Directory list.
 4. Type the name of the file in the Open filename field.
 5. Select Open.

Note:  If you do not type a name in the Open filename field, .Untitled will be
       used as the file name.

 For a detailed explanation of each field, select from the list below:

o Open file name
o Type of file
o Drive
o File
o Directory
o Open
o Cancel


ΓòÉΓòÉΓòÉ 87. Help for Add File ΓòÉΓòÉΓòÉ

Use this window to add a file to the current edit window, following these
steps:

 1. Select the down arrow to the right of the Drive list to display all the
    drives on your system.
 2. Select a drive from the Drive list.
 3. Select a directory from the Directory list.
 4. Select a file name from the File list or type a file name in the Open
    filename field.
 5. Select Add.

For a detailed explanation of each field, select from the list below:

o Open file name
o Type of file
o Drive
o File
o Directory
o Add
o Cancel


ΓòÉΓòÉΓòÉ 88. Help for Import Text File ΓòÉΓòÉΓòÉ

Use this window to retrieve a copy of a file and insert it into the current
file, following these steps:

 1. Select the down arrow to the right of the Drive list to display all the
    drives on your system.
 2. Select a drive from the Drive list.
 3. Select a directory from the Directory list.
 4. Select a file name from the File list or type a file name in the Open
    filename field.
 5. Select Import.

For a detailed explanation of each field, select from the list below:

o Open file name
o Type of file
o Drive
o File
o Directory
o Import
o Cancel


ΓòÉΓòÉΓòÉ 89. Help for Open Filename ΓòÉΓòÉΓòÉ

Type the name of the file you want to open in the Open filename field and then
select OK.


ΓòÉΓòÉΓòÉ 90. Help for Save As Filename ΓòÉΓòÉΓòÉ

Type the name of the file you want to save in the Save as filename field and
then select Save As.


ΓòÉΓòÉΓòÉ 91. Help for Type of File ΓòÉΓòÉΓòÉ

Select the down arrow to the right of the Type of file field to display the
available file types.


ΓòÉΓòÉΓòÉ 92. Help for Save File as Type ΓòÉΓòÉΓòÉ

Select the down arrow to the right of the Save file as type field to display
the available file types.


ΓòÉΓòÉΓòÉ 93. Help for Drive ΓòÉΓòÉΓòÉ

The Drive list displays the drives on your system.  Select the drive that
contains the files you want to view.


ΓòÉΓòÉΓòÉ 94. Help for File ΓòÉΓòÉΓòÉ

The File list displays all the files in the directory you selected from the
Directory list.  Select the file you want to open.


ΓòÉΓòÉΓòÉ 95. Help for Directory ΓòÉΓòÉΓòÉ

The Directory list displays the directories on the selected drive.  Select a
directory to display the list of files from that directory in the File list
box.


ΓòÉΓòÉΓòÉ 96. Help for OK ΓòÉΓòÉΓòÉ

Select OK to accept all choices in the window.


ΓòÉΓòÉΓòÉ 97. Help for Cancel ΓòÉΓòÉΓòÉ

Select Cancel to remove the window from the screen without saving any changes.


ΓòÉΓòÉΓòÉ 98. Help for Open ΓòÉΓòÉΓòÉ

Use this window to open a new edit window, following these steps:

 1. Select a file from the selection list or type a file name in the entry
    field.
 2. Select OK.

Select File list to view a list of all files.

For a detailed explanation of each field, select from the list below:

o OK
o File list
o Cancel


ΓòÉΓòÉΓòÉ 99. Help for Add File ΓòÉΓòÉΓòÉ

Use this window to add a file to the current edit window, following these
steps:

 1. Select a file from the selection list or type a file name in the entry
    field.
 2. Select OK.

Select File list to view a list of all files.

For a detailed explanation of each field, select from the list below:

o OK
o File list
o Cancel


ΓòÉΓòÉΓòÉ 100. Help for Import Text File ΓòÉΓòÉΓòÉ

Use this window to retrieve a copy of a file and insert it into the current
file, following these steps:

 1. Select a file from the list box or type a file name in the entry field.
 2. Select OK.

Select File list to view a list of all files.

For a detailed explanation of each field, select from the list below:

o OK
o File list
o Cancel


ΓòÉΓòÉΓòÉ 101. Help for Open ΓòÉΓòÉΓòÉ

Select Open to open a new edit window with the selected file.


ΓòÉΓòÉΓòÉ 102. Help for Import ΓòÉΓòÉΓòÉ

Select Import to place a copy of the selected file into the current file.


ΓòÉΓòÉΓòÉ 103. Help for Add ΓòÉΓòÉΓòÉ

Select Add to place the selected file into the current edit window.


ΓòÉΓòÉΓòÉ 104. Help for File List ΓòÉΓòÉΓòÉ

Select File list to display a window that enables you to access files on the
system.


ΓòÉΓòÉΓòÉ 105. Help for Save As ΓòÉΓòÉΓòÉ

Use this window to save a file and assign it a name, following these steps:

 1. Select the down arrow to the right of the Drive list to display all the
    drives on your system.
 2. Select a drive from the Drive list.
 3. Select a directory from the Directory list.
 4. Select a file name from the File list or type a file name in the Save as
    filename field.
 5. Select Save As.

For a detailed explanation of each field, select from the list below:

o Save as filename
o Save file as type
o Drive
o File
o Directory
o Save as
o Cancel


ΓòÉΓòÉΓòÉ 106. Help for Save As ΓòÉΓòÉΓòÉ

Select Save As to store the current file with the name you entered in the file
name field.


ΓòÉΓòÉΓòÉ 107. Help for Print ΓòÉΓòÉΓòÉ

Use this window to print the current file or display a preview of your file
before printing. To print a file in draft mode:

 1. Select a printer from the list of available printers.
 2. Select Draft mode.
 3. Select Print.

To see a preview of your file before it is printed:

 1. Select a printer from the list available printers.
 2. Select WYSIWYG.
 3. Select Preview.

The current file will appear in a box to the right of the printer list.  You
can select Next or Previous to view the file.  You also have two options
available for printing:.

Print viewed page
          Print only the current page in the view window.
Print entire file
          Print every page of the current file.

For a detailed explanation of each field, select from the list below:

o Draft mode
o WYSIWYG
o Print viewed page
o Print entire file
o Print
o Preview
o Cancel
o Previous
o Next


ΓòÉΓòÉΓòÉ 108. Help for Draft Mode ΓòÉΓòÉΓòÉ

Select Draft mode to print the current file.


ΓòÉΓòÉΓòÉ 109. Help for WYSIWYG ΓòÉΓòÉΓòÉ

Select WYSIWYG to print the file in WYSIWYG mode, and to optionally see a
preview of your file before it is printed.  WYSIWYG stands for "What You See Is
What You Get".


ΓòÉΓòÉΓòÉ 110. Help for Print Viewed Page ΓòÉΓòÉΓòÉ

Select Print Viewed Page to print the page currently in the preview window.


ΓòÉΓòÉΓòÉ 111. Help for Print Entire File ΓòÉΓòÉΓòÉ

Select Print Entire File to print every page of the current file.


ΓòÉΓòÉΓòÉ 112. Help for Print ΓòÉΓòÉΓòÉ

Select Print to print the current file.


ΓòÉΓòÉΓòÉ 113. Help for Preview ΓòÉΓòÉΓòÉ

Select Preview to see a preview of your file before it is printed.  The WYSIWYG
option must be selected before you can preview your file.


ΓòÉΓòÉΓòÉ 114. Help for Previous ΓòÉΓòÉΓòÉ

Select Previous to view the page before the current page of your file in the
preview window.


ΓòÉΓòÉΓòÉ 115. Help for Next ΓòÉΓòÉΓòÉ

Select Next to view the page after the current page of your file in the preview
window.


ΓòÉΓòÉΓòÉ 116. Help for Print Mark ΓòÉΓòÉΓòÉ

Use this window to print the currently marked text. To print the marked text:

 1. Select a printer from the list of available printers.
 2. Select Draft or WYSIWYG.

For a detailed explanation of each field, select from the list below:

o Draft
o WYSIWYG
o Cancel


ΓòÉΓòÉΓòÉ 117. Help for Draft ΓòÉΓòÉΓòÉ

Select Draft to print the currently marked text in a draft mode.


ΓòÉΓòÉΓòÉ 118. Help for WYSIWYG ΓòÉΓòÉΓòÉ

Select WYSIWYG to print the currently marked text in the style shown on the
monitor.  WYSIWYG stands for "What You See Is What You Get".


ΓòÉΓòÉΓòÉ 119. Help for Type ΓòÉΓòÉΓòÉ

Use this window to set a type for the current file.

 1. Select a file type from the list of file types.
 2. Select Set.

For a detailed explanation of each field, select from the list below:

o File type
o Set
o Cancel


ΓòÉΓòÉΓòÉ 120. Help for File Type ΓòÉΓòÉΓòÉ

The file type is an attribute of a file that describes its contents.


ΓòÉΓòÉΓòÉ 121. Help for Set ΓòÉΓòÉΓòÉ

Select Set to change the current file type to the type you selected in the
list.


ΓòÉΓòÉΓòÉ 122. Help for Cancel ΓòÉΓòÉΓòÉ

Select Cancel if you decide not to change the current settings.


ΓòÉΓòÉΓòÉ 123. Help for Subject ΓòÉΓòÉΓòÉ

Use this window to type a subject for the current file.

 1. Type a line of text (up to 40 characters) that describes the current file.
 2. Select Set.

For a detailed explanation of each field, select from the list below:

o Set
o Cancel


ΓòÉΓòÉΓòÉ 124. Help for Set ΓòÉΓòÉΓòÉ

Select Set to accept the text and close the window.


ΓòÉΓòÉΓòÉ 125. Help for Cancel ΓòÉΓòÉΓòÉ

Select Cancel if you decide not to type a subject.


ΓòÉΓòÉΓòÉ 126. Enhanced Editor Commands ΓòÉΓòÉΓòÉ

Enhanced Editor supports a variety of general-purpose editing commands.
Several of the most common commands are available on the menu bar.  All of the
commands can be started from the Command window.  Select any of the following
commands for more information about the command:

o [#] (Go To Line)
o ACTIVATEACCEL (Activate an Accelerator Table)
o ADD (Add Block)
o ALL (Find All Text)
o APPEND (Append to File)
o ASC (Get ASCII Value)
o AUTOSAVE (Query or Set Autosave Value)
o BOTTOM (Go To Bottom)
o BOX (Box Mark)
o BROWSE (Query or Set Browse Mode)
o BUILDACCEL (Build an Accelerator Table Entry)
o BUILDSUBMENU (Build an Action Bar Pulldown)
o BUILDMENUITEM (Add Menu Item to Pulldown)
o CD (Change Directory)
o CENTER (Center Mark)
o CHANGE (Change Text)
o CHR (Get Character for ASCII Value)
o CLOSE (Close the Edit Window)
o COPY2CLIP (Copy to Clipboard)
o CUT (Cut Text)
o DELETEMENU (Delete a Menu Item)
o DIR (Directory List)
o DISPLAY (Change Message Display Actions)
o DOLINES (Process Lines)
o DPATH (Show DPATH Setting)
o DRAW (Draw Text Graphics)
o ECHO (Echo Commands)
o EDIT (Edit File)
o EPATH (Edit a File in a PATH Setting)
o ESCAPEKEY (Toggle Escape Key action)
o EXPAND (Syntax Expansion)
o FILE (Save and Quit)
o FILL (Fill Mark)
o GET (Get a File)
o INSERT_ATTR_VAL_PAIR (Insert Character Attributes)
o INSERT_ATTRIBUTE (Insert Character Attribute)
o KEY (Repeat a Key)
o LIST (Find Files)
o LOCATE (Locate Text)
o LOCK (Lock a File)
o LONGNAMES (Toggle Long File Name Support)
o LOOPKEY (Repeat a Key)
o LOWERCASE (Convert Marked Text to Lowercase)
o MARGINS (Set Text Margins)
o MATCHTAB (Use Words as Tab Stops)
o MATHx (Calculate)
o MESSAGEBOX (Activate Message box)
o MULT (Multiply Block)
o NAME (Rename Current File)
o NEWWINDOW (Move Current File to a New Edit Window)
o OPATH (Open a File in a PATH Setting)
o OPEN (Open New Edit Window)
o OS2 (Process OS/2 Command)
o PASTE (Paste Text)
o PATH (Show PATH Setting)
o PRINT (Print File)
o PROFILE (Toggle Profile Setting)
o QUIT (Quit File)
o QD (Query Date)
o QT (Query Time)
o RC (Show Return Code)
o REGISTER_MOUSE (Register Mouse Event)
o SAVE (Save File)
o SAYERROR (Display Error Code or Message)
o SET (Show Environment Settings)
o SHELL (Start a Command Shell)
o SHOWMENU (Activate an Action Bar Menu)
o SORT (Sort File)
o STAY (Control Cursor Position After CHANGE Command)
o SUBJECT (Display or Set File Subject)
o TABKEY (Toggle Tab Key action)
o TRIM (Trim Edit Window)
o TABS (Set Tab Stops)
o TOP (Go To Top)
o TYPE (Display or Set File Type)
o UNIVERSAL (Change Universal Variables)
o UNLOCK (Unlock a File)
o UPPERCASE (Convert Marked Text to Uppercase)
o VER (Show Editor Version)
o VOL (Show Volume Label)

Related Information:

Issuing editor commands


ΓòÉΓòÉΓòÉ 126.1. (Go To Line) ΓòÉΓòÉΓòÉ

Syntax:  [+|-]nnnn

Use this command to move the cursor to another line.  It can be used three
ways:

nnnn
          Moves to line number nnnn.
+nnnn
          Moves forward (down) nnnn number of lines.
-nnnn
          Moves backward (up) nnnn number of lines.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.2. ACTIVATEACCEL (Activate an Accelerator Table) ΓòÉΓòÉΓòÉ

Syntax:  ACTIVATEACCEL [table_name]

Use ACTIVATEACCEL in a Rexx macro to activate the named accelerator table.  If
no name is given, the current accelerator table (which could have been updated
with the BUILDACCEL command) is rebuilt.

Related Information:

o BUILDACCEL


ΓòÉΓòÉΓòÉ 126.3. ADD (Add Block) ΓòÉΓòÉΓòÉ

Syntax:  ADD

Use ADD to add the numeric expressions in the current mark, and display the
result on the next line after the mark.  The mark must be either a block mark
or a line mark.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o MULT
o MATHx


ΓòÉΓòÉΓòÉ 126.4. ALL (Find All Text) ΓòÉΓòÉΓòÉ

Syntax:  ALL /search_string[/[c]]

Use ALL to create a temporary file showing all occurrences of search_string in
the current file.

The c option ignores case in the search_string. For example, "Search",
"search", and "SEARCH" are treated the same.

The delimiter used to separate search_string and the options is the first
non-blank character following "ALL."

Once the command has completed processing, use Ctrl+Q to switch between the
result file and the search file.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.5. APPEND, APP (Append to File) ΓòÉΓòÉΓòÉ

Syntax:  APPEND or APP [filespec]

Use APPEND to add the marked text to the file filespec.  If no text is marked,
the entire current file is taken as the source.  The equals sign, "=" can be
used as a shorthand for various parts of the file specifier.

For convenience, filespec can be omitted if you wish to repeat an APPEND to the
same file.  APPEND commands without a filespec reuse the last-specified name.

You can print a marked block of text by issuing APPEND LPTn. (But the PRINT
command prints a block if one is marked.)

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o PRINT
o Marking text


ΓòÉΓòÉΓòÉ 126.6. ASC (Get ASCII Value) ΓòÉΓòÉΓòÉ

Syntax:  ASC [char]

Use ASC to display the ASCII value of the specified character.  If no character
is specified, the character at the cursor is used.

Note:  The ASC command is the opposite of the CHR command.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.7. AUTOSAVE (Query or Set Autosave Value) ΓòÉΓòÉΓòÉ

Syntax:  AUTOSAVE [#### | ON | OFF | ? | DIR]

Use AUTOSAVE to display or set the autosave values. The parameters are:

[none]
          Displays the current values on the message line, and places an
          AUTOSAVE command in the command window where you can change it.
####
          Sets the current autosave count to the specified number.
ON
          Sets the current autosave count to the default value.
OFF
          Sets the current autosave count to 0, turning off autosaves.
?
          Displays the current values in a window, with a button you can select
          to list all files in the autosave directory.
DIR
          Lists all files in the autosave directory.

The autosave values displayed are the autosave count (after this many changes
are made to the file, an automatic save is done to a temporary file) and the
autosave file name (the file which is saved whenever the autosave count is
reached).  The default autosave count is set through the Configure window.  The
autosave path is also set in the Configure window; the autosave file name is
constructed from the autosave path, the current file name, and a unique 3-digit
extension.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.8. BOT, BOTTOM (Go To Bottom) ΓòÉΓòÉΓòÉ

Syntax:  BOTTOM or  BOT

Use BOTTOM to move the cursor position to the last line of the file.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.9. BOX (Box Mark) ΓòÉΓòÉΓòÉ

Syntax:  BOX 1|2|3|4|5|6|C|P|A|E|B|/character

Use BOX to draw a box around the current block mark.  The box type depends on
the option specified:

1
          Single line.
2
          Double line.
3
          Dotted line.
4
          Thick line.
5
          Double line horizontally; single line vertically.
6
          Single line horizontally; double line vertically.
C
          Comment box using C language syntax.
P
          Comment box using Pascal language syntax.
A
          Comment box using Assembler language syntax.
E
          Erases the box surrounding the block mark.
B
          Box of blanks.
/character
          Box of specified character.

Note:  If a proportional font is used, the lines will not appear to line up
       vertically even though they are in the correct columns.  Use a
       non-proportional font (for example, System Monospaced or Courier) if you
       want the characters to line up on the screen.

Note:  The single-to-double line intersections used in box styles 5 and 6 will
       display as national characters in some code pages.  Either change to a
       different code page, or use a different box style.

Graphic characters cannot be sent in mail messages.  You must issue this
command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.10. BROWSE (Query or Set Browse Mode) ΓòÉΓòÉΓòÉ

Syntax:  BROWSE [ON | OFF | ?]

Use BROWSE to determine if the file can be updated. The parameters are:

ON
          File can be read, but not updated.
OFF
          File can be read and updated.
?
          Browse mode (ON or OFF) is displayed.

Note:  Browse mode applies to the entire edit ring, not to a specific file.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.11. BUILDACCEL (Build Accelerator Table Entry) ΓòÉΓòÉΓòÉ

Syntax:  BUILDACCEL table flags key index command

Use BUILDACCEL to add an accelerator table entry to an accelerator. table is
the name of the table to be updated; use '*' to indicate the currently active
accelerator table.  flags is a combination of flags corresponding to the AF_
constants in PMWIN.H in the OS/2 Toolkit, keys is an ASCII key value if flags =
AF_CHAR; a VK_ constant from PMWIN.H if flags = AF_VIRTUALKEY, etc.  (See the
EPM Technical Reference for further details.)  index is a unique number (unique
in the active menu as well as the active accelerator table), and command is the
command to be executed when the key is pressed.

/* Rexx example of accelerator key definition */
   AF_CHAR        =   1   /* key style constants */
   AF_VIRTUALKEY  =   2
   AF_SCANCODE    =   4
   AF_SHIFT       =   8
   AF_CONTROL     =  16
   AF_ALT         =  32
   AF_LONEKEY     =  64

   VK_F1        = 32
   VK_ALT       = 11

'buildaccel *' (AF_CHAR + AF_CONTROL)      122 9300 'sayerror Ctrl+z pressed'
                                  /* ASCII 122 = 'z' */
'buildaccel *' (AF_CHAR + AF_CONTROL)       90 9301 'sayerror Ctrl+Z pressed'
                                  /* ASCII  90 = 'Z' */
'buildaccel *' (AF_VIRTUALKEY + AF_ALT)  VK_F1 9302 'qtime'
                                /* Alt+F1 tells the time */
'buildaccel *  (AF_VIRTUALKEY + AF_LONEKEY)  VK_ALT 9303 'sayerror F10 = action bar'
                                /* Block Alt key from going to the action bar. */
'activateaccel'  /* No argument => use current table name. */

Related Information:

o ACTIVATEACCEL


ΓòÉΓòÉΓòÉ 126.12. BUILDMENUITEM (Add Menu Item to Pulldown) ΓòÉΓòÉΓòÉ

Syntax:  BUILDMENUITEM menuname submenuid menuitemid submenutext attrib
helppanel e_command

Use BUILDMENUITEM in a Rexx macro to add menu items to an action bar pulldown.
Buildmenuitem adds a menu item to the pulldown with ID submenuid in the menu
named menuname. The text displayed on the pulldown will be submenutext (which
can not contain spaces). The attribute will be attrib (see the menu calls in
the OS/2 Technical Reference for the various attributes, or just use 0), the
help panel resid that will be displayed if the user presses F1 while the menu
item is selected is helppanel (0 if no help for that menu item), and e_command
is the command that will be executed if that menu item is selected. All the
menuitemid's must be unique.

/* Rexx sample .erx file - adds "RexxInterface" to the action bar, */
/* with two menu entries under it.                               */
'buildsubmenu default 1990 RexxInterface  0 0'
'buildmenuitem default 1990 1991 AddCommentFields      0 0 rx comment'
'buildmenuitem default 1990 1992 ShowRexxDateFormats   0 0 rx rxdates'
'showmenu default'

The submenuids for the standard menus are:

File        2
Edit        8
Search      3
Options     4
Command     1
Help        6

Related Information:

o BUILDSUBMENU
o DELETEMENU
o SHOWMENU


ΓòÉΓòÉΓòÉ 126.13. BUILDSUBMENU (Build an Action Bar Pulldown) ΓòÉΓòÉΓòÉ

Syntax:  BUILDSUBMENU menuname submenuid submenutext attrib helppanel e_command

Use BUILDSUBMENU in a Rexx macro to create a new action bar entry. Buildsubmenu
adds a pulldown to the action bar menu named menuname, as submenu number
submenuid.  The text displayed on the action bar will be submenutext (which can
not contain spaces), the attribute will be attrib (see the menu calls in the
OS/2 Technical Reference for the various attributes, or just use 0), the help
panel resid that will be displayed if the user presses F1 while the menu item
is selected is helppanel (0 if no help for that menu item), and e_command is
the command that will be executed if that menu item is selected.  It should be
blank (omitted) if you want to define a pull-down; if a command is defined in
the Buildsubmenu opcode then it will act immediately.  If no command is
defined, then the pull-down menu presented will be all the menu items added via
Buildmenuitem calls that specified the same submenuid.

Related Information:

o BUILDMENUITEM
o DELETEMENU
o SHOWMENU


ΓòÉΓòÉΓòÉ 126.14. CD (Change Directory) ΓòÉΓòÉΓòÉ

Syntax:  CD [ [drive:]path ]

Use CD to change the current directory to the drive and path specified.  If
neither drive nor path are specified, the current directory is displayed.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.15. CENTER (Center Mark) ΓòÉΓòÉΓòÉ

Syntax:  CENTER

Use CENTER to center the text within the current mark.  If the current mark is
a line mark, the text is centered using the current margins.  If the current
mark is a block mark, the text is centered using the block boundaries for the
margins.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.16. CHANGE, C (Change Text) ΓòÉΓòÉΓòÉ

Syntax: CHANGE or  C /search_string /replace_string/options

Use CHANGE to find search_string and replace it with replace_string, depending
on the options specified:

-
          Searches from the current cursor position backward.
+
          Searches from the current cursor position forward.
*
          Replaces all occurrences of search_string with replace_string.
M
          Searches within the marked area only.
A
          Searches within the entire file.
C
          Ignores case while searching for search_string.
E
          Respects case while searching for search_string.
R
          Search reversed, right to left, within each line.
F
          Search forward, left to right, within each line.

The default options are + A E F.

The delimiter used to separate search_string, replace_string, and the options
is the first non-blank character following C.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o Search dialog


ΓòÉΓòÉΓòÉ 126.17. CHR (Get Character for ASCII Value) ΓòÉΓòÉΓòÉ

Syntax:  CHR ASCII_character_code

Use CHR to display the character associated with the ASCII_character_code
specified.

Note:  The CHR command is the opposite of the ASC command.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.18. CLOSE (Close the Edit Window) ΓòÉΓòÉΓòÉ

Syntax:  CLOSE

Use CLOSE to quit all the files in the current edit ring and close the edit
window.  Before quitting any modified files in the ring, a window appears which
enables you to select Save to save the file, Discard to discard the changes, or
Cancel to cancel the close.  If you select Cancel for any of the modified
files, no files are removed from the ring.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.19. COPY2CLIP (Copy to Clipboard) ΓòÉΓòÉΓòÉ

Syntax:  COPY2CLIP

Use COPY2CLIP to copy the text within the current mark to the clipboard for
transfer to other files being edited, or to other programs.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o CUT
o PASTE


ΓòÉΓòÉΓòÉ 126.20. CUT (Cut Text) ΓòÉΓòÉΓòÉ

Syntax:  CUT

Use CUT to copy the text within the current mark to the clipboard for transfer
to other files being edited, or to other programs.  The marked text is deleted
from the file.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o Marking text
o COPY2CLIP
o PASTE


ΓòÉΓòÉΓòÉ 126.21. DELETEMENU (Delete a Menu Item) ΓòÉΓòÉΓòÉ

Syntax:  DELETEMENU menuname submenuid menuitemid itemonly

Use DELETEMENU to delete an action bar or pulldown menu item. menuname is the
name of the menu.  submenuid is the pulldown submenu that is to be deleted.
(To delete all submenus set this parameter to 0.) menuitemid is the item to
start deleting off a particular submenu (To delete all menu items under a
submenu, set this parameter to 0.) itemonly is true if it is desired to delete
only the items under a sub-menu but not the sub-menu itself.

Related Information:

o BUILDMENUITEM
o BUILDSUBMENU
o SHOWMENU


ΓòÉΓòÉΓòÉ 126.22. DIR (Directory List) ΓòÉΓòÉΓòÉ

Syntax:  DIR [ path ]

Use DIR to open a temporary file containing the directory listing for the path
or the current directory, if no path is specified.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.23. DISPLAY (Change Message Display Actions) ΓòÉΓòÉΓòÉ

Syntax:  DISPLAY number

Use DISPLAY in a Rexx macro to control message display and screen updating.  A
negative number turns the display control off, and a positive number turns it
back on.  You can turn on or off multiple flags in one DISPLAY call by adding
them together, provided they are all positive or negative. -1 turns off screen
update; 1 turns it back on. -2 turns off the display of messages; 2 turns it
back on. -4 forces messages to be displayed in the message box; 4 reverts to
displaying them on the message line; -8 prevents messages from being saved in
the message box list; 8 lets them be saved.


ΓòÉΓòÉΓòÉ 126.24. DOLINES (Executes Lines) ΓòÉΓòÉΓòÉ

Syntax:  DOLINES

Use DOLINES to process the current line or all marked lines as though they were
typed in the Command window.  The line or lines must be editor or OS/2*
commands.  If a line mark exists, you are asked if you want to process all
marked lines.  You can select Yes, No (to only process the current line), or
Cancel.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.25. DPATH (Show DPATH Setting) ΓòÉΓòÉΓòÉ

Syntax:  DPATH

Use DPATH to open a temporary file containing the DPATH environment setting.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.26. DRAW (Draw Text Graphics) ΓòÉΓòÉΓòÉ

Syntax:  DRAW 1|2|3|4|5|6|B|/character

Use DRAW to draw lines within your document, using the built-in graphics
characters.  The type of line depends on the option specified:

1
          Single line.
2
          Double line.
3
          Dotted line.
4
          Thick line.
5
          Double line horizontally; single line vertically.
6
          Single line horizontally; double line vertically.
B
          Blank line, for erasing other lines.
/character
          Line of specified character.

Note:  If a proportional font is used, the lines will not appear to line up
       vertically even though they are in the correct columns.  Use a
       non-proportional font (for example, System Monospaced or Courier) if you
       want the characters to line up on the screen.

Note:  The single-to-double line intersections used in drawing styles 5 and 6
       will display as national characters in some code pages.  Either change
       to a different code page, or use a different drawing style.

Graphic characters cannot be sent in mail messages.  You must issue this
command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.27. ECHO (Echo Commands) ΓòÉΓòÉΓòÉ

Syntax:  ECHO [ON | OFF]

Use ECHO to switch the echo mode on or off; anything else tells you the current
value.  When echo mode is on, every command is displayed in the message field
before being processed.  The parameters are:

[none]
          Displays current value.
ON
          Every command is displayed in the message field before being
          processed.
OFF
          No commands are displayed.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.28. EDIT, E (Edit File) ΓòÉΓòÉΓòÉ

Syntax:  EDIT or E [ [options] [=]file1 ][, [options] [=]file2 ]...

Use EDIT to load the specified files into the current ring, using the options
specified for each file:

/C
          Create a new file with the given name.
/D
          Search for the file on disk.
/L
          use the OS/2 and DOS convention that a new line is signified by a
          carriage return followed by a line feed.  Carriage returns or line
          feeds standing by themself are kept as text.
/N
          Search for the file in the current ring.
/T
          Do not expand tabs when the file is loaded.  The default is to expand
          all tabs to an appropriate number of spaces.
/U
          use the Unix convention that a line feed alone is sufficient to start
          a new line when loading a file.  Carriage returns are discarded.
          (This is the default.)

The equals sign, "=" can be used as a shorthand for various parts of the file
specifier.

 Commands (inside paired single quotes) can be intermixed with the file names.
The files are loaded and the commands executed in the order in which they
appear on the command line. For example:

E new.c 'get skeleton.c' 'bot'

File names containing spaces or "=" must be enclosed inside paired double
quotes.  Commands containing single quotes can have the quotes doubled up.  For
example:

e "c:\This name contains spaces"  'L /It''s'

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.29. EPATH, EP (Edit a File in a PATH Setting) ΓòÉΓòÉΓòÉ

Syntax:  EPATH or EP filespec [pathname]

Use EPATH to search an environment setting for the specified file and load it.
The path name defaults to EPMPATH, except if the file specifier extension is
CMD; then the path name defaults to PATH. Examples:

ep mycnf.e
          Searches the EPMPATH setting for MYCNF.E.
ep test.cmd
          Searches the PATH setting for TEST.CMD.
ep main.c include
          Searches the INCLUDE setting for MAIN.C.

The search order is:

 1. The current directory
 2. Each directory listed in the path setting

If the file is found in the search path, it is loaded from that subdirectory.
If not, an empty file with that name will be loaded.  The path will default to
the current directory.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.30. ESCAPEKEY (Toggle Escape Key Action) ΓòÉΓòÉΓòÉ

Syntax:  ESCAPEKEY [ON | OFF]

Use ESCAPEKEY to switch the escape key mode on or off; anything else tells you
the current value.  When escape key mode is on, the escape key can be used to
bring up the command line dialog (just like Ctrl+I).  This is for compatability
with previous versions of EPM.  The default is escape key mode off.

You must issue this command from the Command window.

To save the current escape key mode setting as your permanent default:

 1. Select Options.
 2. Select Save options.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.31. EXPAND (Syntax Expansion) ΓòÉΓòÉΓòÉ

Syntax:  EXPAND [ON | OFF]

Use EXPAND to set syntax expansion ON or OFF.  If no parameters are given, the
current value is displayed.

Syntax expansion occurs when Space or Enter is pressed while a file with a
supported language-specific extension is active (for example C, PAS, or CMD).
When automatic expansion is off, you can force expansion to occur by pressing
Ctrl+X.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.32. FILE (Save and Quit) ΓòÉΓòÉΓòÉ

Syntax:  FILE [ [=]filename ] [options]

Use FILE to store the file (using the file name specified, or the current file
name) and quit editing the file.

If "=" is specified, filename is prefixed with the drive and path of the
current file.

See the SAVE command for the list of valid options.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o SAVE command


ΓòÉΓòÉΓòÉ 126.33. FILEFIND (Find Files) ΓòÉΓòÉΓòÉ

Synonym for the LIST command.

Related Information:

LIST


ΓòÉΓòÉΓòÉ 126.34. FILL (Fill Mark) ΓòÉΓòÉΓòÉ

Syntax:  FILL [ character ]

Use FILL to fill the current mark with the character specified.  If no
character is given, a dialog will be presented asking for one.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.35. FINDFILE (Find Files) ΓòÉΓòÉΓòÉ

Synonym for the LIST command.

Related Information:

LIST


ΓòÉΓòÉΓòÉ 126.36. GET (Get a File) ΓòÉΓòÉΓòÉ

Syntax:  GET filespec

Use GET to retrieve a file and insert it starting on the next line after the
cursor position.  The equals sign, "=" can be used for various parts of the
file specifier.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.37. HELP (Open Help Browser) ΓòÉΓòÉΓòÉ

Syntax:  HELP

Use HELP to load the EPMHELP.QHL file into a browse-mode window, which displays
help information.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.38. INSERT_ATTR_VAL_PAIR (Insert Character Attributes) ΓòÉΓòÉΓòÉ

Syntax:  INSERT_ATTR_VAL_PAIR class attr_val [fstline lstline fstcol lstcol
[fid]]

Use INSERT_ATTR_VAL_PAIR in a Rexx macro to insert push and pop attributes as a
pair into a file.  class is the attribute class; attr_val is the attribute
value; fstline lstline fstcol lstcol refer to the beginning and ending
characters where the attributes are to be inserted (if omitted, then a mark
must exist, and the attributes are inserted at the beginning and end of the
mark; for a block mark, at the left and right sides of the mark on each line),
and fid is the identifier of the file into which the attributes should be
inserted (if omitted, it defaults to the current file).

/* Rexx macro to highlight the subject line */
/* Assumes .levelofattributesupport has '1' turned on */
/* to enable color display. */
BLACK = 0; BLUE = 1; GREEN = 2; CYAN = 3; RED = 4; MAGENTA = 5; BROWN = 6;
LIGHT_GREY = 7; DARK_GREY = 8; LIGHT_BLUE = 9; LIGHT_GREEN = 10;
LIGHT_CYAN = 11; LIGHT_RED = 12; LIGHT_MAGENTA = 13; YELLOW = 14;
WHITE = 15; BLACKB = 0; BLUEB = 16; GREENB = 32; CYANB = 48; REDB = 64;
MAGENTAB = 80; BROWNB = 96; GREYB =112; LIGHT_GREYB =112;
DARK_GREYB =128; LIGHT_BLUEB =144; LIGHT_GREENB =160; LIGHT_CYANB = 176;
LIGHT_REDB =192; LIGHT_MAGENTAB =208; YELLOWB =224; WHITEB =240;

'l /Subject:/c'
if rc = 0 then do        /* Found it! */
   'extract /line/col'
   'Insert_attr_val_pair 1' (Light_Magenta + Light_CyanB) ,
                         line.1 line.1 col.1 (col.1 + 7)
end

Related Information:

o Insert_attribute


ΓòÉΓòÉΓòÉ 126.39. INSERT_ATTRIBUTE (Insert Character Attribute) ΓòÉΓòÉΓòÉ

Syntax:  INSERT_ATTRIBUTE class attr_val push_flag offset [col [line [fid]]]

Use INSERT_ATTRIBUTE in a Rexx macro to insert a character attribute into a
file.  class is the attribute class; attr_val is the attribute value; push_flag
is 1 for push, 0 for pop, or the value appropriate for the attribute class
specified. offset is the offset from the character at which the attribute
should be inserted; line and col are the position at which the attribute should
be inserted, and default to the cursor position; and fid is the identifier of
the file into which the attributes should be inserted (if omitted, it defaults
to the current file).

Related Information:

o Insert_attr_val_pair


ΓòÉΓòÉΓòÉ 126.40. KEY (Repeat a Key) ΓòÉΓòÉΓòÉ

Syntax:  KEY #### character

Use KEY to repeat a character horizontally the specified number of times.  This
can be quite powerful;  for example, you can repeat an entire set of recorded
keystrokes (Ctrl+T) 20 times. Example:

KEY 80 =
This writes a line of 80 equal signs into your document.

Character can be a normal ASCII character, or a string representing an extended
ASCII character.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o LOOPKEY


ΓòÉΓòÉΓòÉ 126.41. LIST (Find Files) ΓòÉΓòÉΓòÉ

Syntax:  LIST filespec

Use LIST to load a list of file names that match filespec. If filespec includes
a path, then that directory is used as the starting point; if not, the current
directory is used.  Both the starting directory and any subdirectories are
searched for matching files.  This may take a significant amount of time (a
minute or more) if you name a filespec that qualifies an entire hard disk, such
as

list \*.*
 Once you have the list, you can place the cursor on the name of a file, and
then press Alt-1 to edit that file.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.42. LOCATE, L (Locate Text) ΓòÉΓòÉΓòÉ

Syntax: LOCATE or L /searchstring/options

Use LOCATE to find searchstring depending on the options specified:

-
          Searches from the current cursor position backward.
+
          Searches from the current cursor position forward.
M
          Searches within the marked area only.
A
          Searches within the entire file.
C
          Ignores case while searching for searchstring.
E
          Respects case while searching for searchstring.
R
          Search reversed, that is from right to left, within each line.
F
          Search forward, this is from left to right, within each line.
G
          Use the GREP algorithm.

The default options are + A E F.

The delimiter used to separate searchstring, replacestring, and the options is
the first non-blank character following L.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o Search dialog


ΓòÉΓòÉΓòÉ 126.42.1. GREP option ΓòÉΓòÉΓòÉ

Use the GREP option, /g, to specify special pattern-matching characters within
the search string. These characters are:

. (period)
          Matches any character.
^
          Matches the beginning of a line.
$
          When following search string, matches the end of a line.
\ character
          Matches character; used to override any special meaning given to
          characters.
[list_of_characters]
          Matches any of the characters in the list.

          A list of characters can be indicated as a range using the hyphen (-)
          For example, [a-z] matches with any letter of the alphabet.  If the
          first character after the [ is a ^, then the set is negated, (because
          it matches any character except those in the set).
*
          Matches a sequence of 0 or more of whatever expression it follows.
+
          Matches a sequence of 1 or more of whatever expression it follows.

Examples are presented that search the following file:

Contents of file junk.e:

soft
good junk
and more
stuff
even good
123456
l
do,re,mi,fa,so,la,ti,do
$35

--------------------------------------

Example searches using GREP:

/l./g
                    Finds "la".

/^good/g
                    Finds only first occurrence of "good".

/good$/g
                    Finds only "even good".

/\$/g
                    Finds "$35".

^[m-t]/g
                    Finds "soft" and "stuff".

/^[^adeg]/g
                    Finds "soft", "stuff", "123456",
                    "l", and "$35".

/^[m-t]+/g
                    Finds "soft" and "stuff".

/^[m-t]*/g
                    Finds everything.


ΓòÉΓòÉΓòÉ 126.43. LOCK (Lock a File) ΓòÉΓòÉΓòÉ

Syntax:  LOCK [filespec]

Use LOCK to protect the disk copy of the file from other users in a LAN
networking situation.  If a file name is specified, it is loaded and then
locked; if no file name is given, the current file is locked.

The file is unlocked automatically after a FILE or QUIT command, or it can be
unlocked manually with the UNLOCK command.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o FILE
o QUIT
o UNLOCK


ΓòÉΓòÉΓòÉ 126.44. LONGNAMES (Toggle Long Names Setting) ΓòÉΓòÉΓòÉ

Syntax:  LONGNAMES [ON | OFF]

Use LONGNAMES to switch the long names setting on or off; anything else tells
you the current value.  When long names is on, a file containing a .LONGNAMES
extended attribute will have the extended attribute value shown on the title
bar when being edited, rather than the actual file name.  This is useful if a
file with a long name is copied from an HPFS drive to a FAT drive and has the
original name saved in .LONGNAME; you will be able to see the long name instead
of the truncated name.  The default is long names mode off.

You must issue this command from the Command window.

To save the current long names mode setting as your permanent default:

 1. Select Options.
 2. Select Save options.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.45. LOOPKEY (Repeat a Key) ΓòÉΓòÉΓòÉ

Syntax:LOOPKEY [#### | ALL] character

Use LOOPKEY to repeat the character in a vertical column.  The character is
typed #### times, proceeding vertically downward in the current column.
(Compare this to the KEY command, which repeats the key horizontally in the
same row.)  The parameter ALL can be used instead of a number, in which case
the repetition continues to the end of the file.

Character can be a normal ASCII character, or a string representing an extended
ASCII character.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.46. LOWERCASE (Convert Marked Text to Lowercase) ΓòÉΓòÉΓòÉ

Syntax:  LOWERCASE

Use LOWERCASE to convert all uppercase alphabetic characters in the marked area
to lowercase.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.47. MARGINS, MA (Set Text Margins) ΓòÉΓòÉΓòÉ

Syntax:  MARGINS or MA [ left [ right [ paragraph]]]

Use MARGINS to set specified values for the margins.  If right or paragraph is
omitted, the default values are as follows:

Omitted   Default Value
right
          The previous right margin value is used for the current value.
paragraph
          The value for left is used for the current value.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.48. MATCHTAB (Use Words as Tab Stops) ΓòÉΓòÉΓòÉ

Syntax:  MATCHTAB [ON | OFF]

If set on, Tab and Shift+Tab use the previous line's columns for the current
line's tab stops.  The previous line's columns are defined by the first
character of each (space-delimited) word.  If no parameter is given, the
current value is displayed.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.49. MATHx (Calculate) ΓòÉΓòÉΓòÉ

Syntax:  MATH|MATHX|MATHO expression

Use MATHx to calculate the value of expression and display the result according
to the command specified:

MATH
          Decimal.
MATHX
          Hexadecimal.
MATHO
          Octal.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o MULT


ΓòÉΓòÉΓòÉ 126.50. MESSAGEBOX (Activate Message Box ) ΓòÉΓòÉΓòÉ

Syntax:  MESSAGEBOX [message]

Use MESSAGEBOX to display the editor message box.  If a message is given, it is
added to the message box.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.51. MULT (Multiply Block) ΓòÉΓòÉΓòÉ

Syntax:  MULT

Use MULT to multiply the numeric expressions in the current mark and to display
the result on the next line after the mark.  The mark must be either a block
mark or a line mark.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o ADD
o MATHx


ΓòÉΓòÉΓòÉ 126.52. NAME (Rename Current File) ΓòÉΓòÉΓòÉ

Syntax:  NAME filename

Use NAME to rename the file in the editor.  The Name command does not change
the name of the file on the disk.  The new name is used the next time the file
is stored on the disk.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.53. NEWWINDOW (Move Current File to a New Edit Window) ΓòÉΓòÉΓòÉ

Syntax:  NEWWINDOW

Use NEWWINDOW to store the current file if it has been changed, open a new
window containing the file, then quit the file in the current window.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.54. OPATH, OP (Open a File in a PATH Setting) ΓòÉΓòÉΓòÉ

Syntax:  OPATH or OP filespec [pathname]

Use OPATH to search an environment setting for the specified file and load it
into a new window.  The path name defaults to EPMPATH, except if the file
specifier extension is CMD, then the path name defaults to PATH. Examples:

op mycnf.e
          Searches the EPMPATH setting for MYCNF.E.
op test.cmd
          Searches the PATH setting for TEST.CMD.
op main.c include
          Searches the INCLUDE setting for MAIN.C.

The search order is:

 1. The current directory
 2. Each directory listed in the path setting
If the file is found, it is loaded from that subdirectory. If not, it is loaded
without specifying a directory (which defaults to the current directory).

Note:  OPATH is like EPATH, except that it executes an OPEN command instead of
       an EDIT command.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o EPATH
o OPEN
o EDIT


ΓòÉΓòÉΓòÉ 126.55. OPEN (Open New Edit Window) ΓòÉΓòÉΓòÉ

Syntax:  OPEN [ [=]file1 ][, [=]file2 ]...

Use OPEN to load the specified files into a new edit window.

If "=" is specified, the file name is prefixed with the drive and path of the
current file.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o EDIT


ΓòÉΓòÉΓòÉ 126.56. OS2 (Execute OS/2 Command) ΓòÉΓòÉΓòÉ

Syntax:  OS2 [command_etc]

Use OS/2 to run the OS/2* command processor specified in the COMSPEC
environment variable.  If command_etc is specified, it is passed as an
parameter to the command processor.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.57. PASTE (Paste Text) ΓòÉΓòÉΓòÉ

Syntax:  PASTE [C | B]

Use PASTE to copy text from the clipboard to the editor file at the current
cursor position.  The default is to paste the text as lines (each line in the
clipboard becomes a new line in the file).

C
          The text is pasted as if it were inside a character mark.
B
          The text is pasted as if it were in a block mark (the smallest
          rectangle that would contain all the clipboard text).

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o Mark types
o COPY2CLIP
o CUT


ΓòÉΓòÉΓòÉ 126.58. PATH (Show PATH Setting) ΓòÉΓòÉΓòÉ

Syntax:  PATH

Use PATH to open a temporary file containing the PATH environment setting.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.59. PRINT (Print File) ΓòÉΓòÉΓòÉ

Syntax:  PRINT [ printer ]

Use PRINT to print the marked block, if one exists, or the entire file to the
printer specified.  Printer must be PRN, LPT1-LPT9, or a LAN printer name
(\\servername\queuename).  If no printer is specified, the printer used is the
default printer for your system.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.60. PROFILE (Toggle Rexx Profile Support) ΓòÉΓòÉΓòÉ

Syntax:  PROFILE [ON | OFF]

Use PROFILE to switch the profile setting on or off; anything else tells you
the current value.  When PROFILE is on, a Rexx profile (PROFILE.ERX) is
searched for along the EPMPATH and PATH.  If found, it is executed, and passed
the same arguments that EPM was given.  This happens after EPM has processed
the arguments.  The default is profile mode off.

You must issue this command from the Command window.

To save the current profile mode setting as your permanent default:

 1. Select Options.
 2. Select Save options.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.61. QUIT, Q (Quit a File) ΓòÉΓòÉΓòÉ

Syntax:  QUIT or Q

Use QUIT to exit the current file.  If there are more files in the edit ring,
the previous file becomes the current file. If there are no more files, the
edit window closes.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.62. QDATE, QD (Query Date) ΓòÉΓòÉΓòÉ

Syntax:  QDATE or QD

Use QDATE to display the current system date in the form:

  Today is Tuesday March 31, 1992.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o QTIME


ΓòÉΓòÉΓòÉ 126.63. QTIME, QT (Query Time) ΓòÉΓòÉΓòÉ

Syntax:  QTIME or QT

Use QTIME to display the current system time in the form:

  The time is 12:00:01 am.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o QDATE


ΓòÉΓòÉΓòÉ 126.64. RC (Show Return Code) ΓòÉΓòÉΓòÉ

Syntax:  RC command

Use RC to execute the specified command and display the return code in the
information window.  The command can be either an editor or an OS/2* command.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.65. REGISTER_MOUSE (Register Mouse Event) ΓòÉΓòÉΓòÉ

Syntax:  REGISTER_MOUSE which button action shifts command

Use REGISTER_MOUSE in a Rexx macro to associate a command with a mouse event.
which is 1 for the global mouse table or 0 for the local; button is the mouse
button (1, 2 or 3), action is one of:

Action    meaning

CLICK     Pressing and releasing the mouse button produces a click.

SECONDCLK follows click when the mouse is double-clicked.

BEGINDRAG this is called when the mouse button is depressed and the mouse is
          moved.

ENDDRAG   this is called when the mouse button is released after dragging it.

CANCELDRAG. this is called when the drag is cancelled (by pressing Esc before
          releaseing the mouse button).
shifts is 0 for no shift, or the sum of any combination of 1 for the shift key,
2 for the Ctrl key, and 4 for the Alt key. command is the command to be
executed when this mouse event occurs, or blank if the event should be ignored.

Note:  The standard mouse definitions issue a register_mouse for ENDDRAG and
       CANCELDRAG as part of the BEGINDRAG processing.

/* Register an action for Ctrl+Alt+Double-click MB1 */
'register_mouse 1 1 SECONDCLK 6 rx do_line'

/* Do_Line.erx */
'MH_gotoposition'  /* Move cursor to mouse position */
'extract /line/getline'
if line.1 > 0 then
   getline.1  /* Execute the line as a command */


ΓòÉΓòÉΓòÉ 126.66. SAVE, S (Save File) ΓòÉΓòÉΓòÉ

Syntax:  SAVE or S {option} [[=]filename ]

Use SAVE to store the current file on the disk with the name filename, or using
the current file name if filename is not specified.

If "=" is specified, filename is prefixed with the drive and path of the
current file. option can be any of the following.  If conflicting options are
specified, the last one given is used.

/L
          Save the file in standard OS/2 format - each line should be
          terminated with a carriage return followed by a line feed.
/NE
          Do not add an EOF character at the end of the file.
/NS
          Do not strip trailing spaces.
/Q
          Save quietly; don't give the "Saving" message.
/S
          Strip trailing spaces from each line when saving.
/T
          Converts excess blank characters to tabs.
/U
          Save in Unix format; each line will be terminated with just a line
          feed, and no EOF will be added at the End of File.  This is useful
          when saving files to NFS-mounted drives on an AIX or Unix system.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.67. SAYERROR (Display Error Code or Message) ΓòÉΓòÉΓòÉ

Syntax:  SAYERROR expression

Use SAYERROR to display an error code or message in the message area.

If expression is the number 0 or 1, any pending error messages are discarded
and not displayed.  0 will refresh the screen; 1 will not.

If expression is any number other than 0 or 1, the interpreter displays the
string corresponding to that numbered error message.  Error messages and their
corresponding return codes are listed in the EPM Technical Reference.

If expression is not a number, that text will be displayed on the message line.
This is useful in Rexx macros.


ΓòÉΓòÉΓòÉ 126.68. SET (Show Environment Settings) ΓòÉΓòÉΓòÉ

Syntax:  SET

Use SET to open a temporary file containing all the environment settings.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.69. SHELL (Start EPM Command Shell Session) ΓòÉΓòÉΓòÉ

Syntax:  SHELL

Use SHELL to create an EPM command shell session.  The first time you enter
SHELL in an edit window, two new entries are added to the Command menu.  Create
command shell creates a new shell window, and Write to shell... lets you write
a string to the shell window.  If the shell window is waiting at an OS/2
command prompt, then you can enter a command to be executed by either:

 1. Select Command.
 2. Select Write to shell....
 3. Type the text to be written to the shell.
 4. Select OK.
or

 1. Type the text in the shell window following the prompt.
 2. Press the Enter key.

If the string to be written to the shell is in response to a program prompt,
then you must perform the first sequence; the second method won't write
anything to the shell.

The shell can be used for running any non-fullscreen OS/2 program.  The output
from the program is inserted in the shell window as it is generated, even if
you switch to some other file in the edit ring.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.70. SHOWMENU (Activate Menu) ΓòÉΓòÉΓòÉ

Syntax:  SHOWMENU menuname

Use SHOWMENU to activate the action bar named menuname. Changes made with the
BuildSubMenu and BuildMenuItem commands will not be seen until the updated menu
is displayed with ShowMenu.

Related Information:

o BUILDMENUITEM
o BUILDSUBMENU
o DELETEMENU


ΓòÉΓòÉΓòÉ 126.71. SORT (Sort File) ΓòÉΓòÉΓòÉ

Syntax:  SORT [R][C][I]

Use SORT to sort the lines in the current block or the entire file.  The sort
key is the marked columns.  The options are as follows:

R
          Sorts in reverse (descending) order.
C
          Sorts according to collating order, as indicated by your country and
          code page settings.
I
          Sorts ignoring case.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.72. STAY (Control Cursor Position after CHANGE Command) ΓòÉΓòÉΓòÉ

Syntax:  STAY [ON | OFF]

Use STAY to control the position of the cursor after a CHANGE command.  The
parameters are:

[none]
          Displays current value of STAY.
ON
          Cursor remains in original position after CHANGE.
OFF
          Cursor moves to the last changed string.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o CHANGE


ΓòÉΓòÉΓòÉ 126.73. SUBJECT (Display or Set File Subject) ΓòÉΓòÉΓòÉ

Syntax:  SUBJECT

Use SUBJECT to display, set, or change the file subject field.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.74. TABKEY (Toggle TAB Key Action) ΓòÉΓòÉΓòÉ

Syntax:  TABKEY [ON | OFF]

Use TABKEY to switch the tab key mode on or off; anything else tells you the
current value.  When tab key mode is on, the tab key will enter a tab
character.  When TAB key mode is off, the tab key will move the cursor to the
next tab stop without typing in a tab character.  The default is tab key mode
off.

You must issue this command from the Command window.

To save the current tab key mode setting as your permanent default:

 1. Select Options.
 2. Select Save options.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.75. TABS (Set Tab Stops) ΓòÉΓòÉΓòÉ

Syntax:  TABS [ inc | tab1 tab2... tab32 ]

Use TABS to set the tab stops according to the options specified:

inc
          Sets 32 tab stops, beginning with 1, inc spaces apart.
tab1 tab2 ... tab32
          Sets up to 32 tab stops at the specified locations.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.76. TOP (Go To Top) ΓòÉΓòÉΓòÉ

Syntax:  TOP

Use TOP to move the cursor position to the first line of the file.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.77. TRIM (Trim Edit Window) ΓòÉΓòÉΓòÉ

Syntax:  TRIM

Use TRIM to resize the edit window so that no partial characters can be seen at
the right or bottom edge of the edit window.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.78. TYPE (Display or Set File Type) ΓòÉΓòÉΓòÉ

Syntax:  TYPE

Use TYPE to display, set, or change the file type.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.79. UNIVERSAL (Change Universal Variables) ΓòÉΓòÉΓòÉ

Syntax:  UNIVERSAL variable_name [value]

Use REGISTER_MOUSE in a Rexx macro to update some internal universal variables
without having to recompile the macros. variable_name can be one of

default_search_options Options used by the Locate command and initial values
          for the Search dialog.

default_edit_options Options used by the Edit command

default_save_options Options used by the Save command
value is the value to be set in the universal variable, and can be blank. The
value of these variables is inserted before any options passed on the command
line, so these defaults can be overridden on any specific command.

/* Profile.erx - initializations for a new edit window */
      /* Make the default search be case-insensitive */
'universal default_search_options C'
      /* No Tabs - expand them when loading a file */
'universal default_edit_options /nt'
      /* Strip trailing blanks when saving a file */
'universal default_save_options /s'


ΓòÉΓòÉΓòÉ 126.80. UNLOCK (Unlock a File) ΓòÉΓòÉΓòÉ

Syntax:  UNLOCK [filespec]

Use UNLOCK to unlock the current or specified file, which must have been locked
using the LOCK command.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands
o LOCK


ΓòÉΓòÉΓòÉ 126.81. UPPERCASE (Convert Marked Text to Uppercase) ΓòÉΓòÉΓòÉ

Syntax:  UPPERCASE

Use UPPERCASE to convert all lowercase alphabetic characters in the marked area
to uppercase.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.82. VER (Show Editor Version) ΓòÉΓòÉΓòÉ

Syntax:  VER

Use VER to display the version number of the editor.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 126.83. VOL (Show Volume Label) ΓòÉΓòÉΓòÉ

Syntax:  VOL [drive]

Use VOL to open a temporary file containing the volume label of the specified
(or default) drive.

You must issue this command from the Command window.

Related Information:

o Command window
o Issuing editor commands


ΓòÉΓòÉΓòÉ 127. Equals ΓòÉΓòÉΓòÉ

The equals sign, "=", can be used when specifying a new file name to refer the
current file path, file name, and extension, depending on where it appears.
For example, assume the current directory is C:\EDIT, and the current file is
C:\MYDOC\PROG\FOO.DOC.

=
          C:\MYDOC\PROG\FOO.DOC.
=bar.zot
          C:\MYDOC\PROG\BAR.ZOT.
C:\EDIT\=
          C:\EDIT\FOO.DOC.
.\=
          C:\EDIT\FOO.DOC.
=bar.=
          C:\MYDOC\PROG\BAR.DOC.
=.new
          C:\MYDOC\PROG\FOO.NEW.


ΓòÉΓòÉΓòÉ 128. IBM Trademarks ΓòÉΓòÉΓòÉ

Trademark of the IBM Corporation.


ΓòÉΓòÉΓòÉ 129. Help for Enhanced Editor Startup options. ΓòÉΓòÉΓòÉ

When starting Enhanced Editor from an OS/2* command prompt, the following
options can be specified:

/Eexfilename
          Allows a custom .EX file to be specified. (The default is EPM.EX)
/I
          Causes an Enhanced Editor icon to be created.  This icon can be used
          to drop onto to open up a new edit window.  It can be used to start
          an edit window directly, by double-clicking on the icon or by
          activating the icon and pressing Enter.  Finally, the icon is useful
          for keeping the Enhanced Editor active even after closing all open
          edit windows.  The icon can be closed from the task manager, or by
          selecting it and pressing F3.
/O
          Bypasses the simple dialogs and goes directly to the full dialogs.
/M
          Gives the ability to start multiple instances of the Enhanced Editor.
          By default, if you attempt to start the Enhanced Editor twice, the
          second invocation will pass its arguments to the existing session,
          then exit.  This option overrides this default.  This is useful when
          calling the Enhanced Editor from a command file, if you want to be
          sure that control doesn't return to the .CMD file until the edit
          session has ended.
quoted string
          Quoted string representing an editor command can be specified on the
          editor command line.  For example:

                    C:\> EPM mydoc.doc 'bot'

          This causes the Enhanced Editor to open an edit window containing the
          file mydoc.doc and then process the BOTTOM command, which scrolls the
          file to its end.
filename
          One or more file names can be specified.  For example:

                    C:\> EPM mydoc.doc d:\yourdoc.doc herdoc.doc d:\him\hisdoc.doc

wildcard
          One or more wildcards can be specified.  For example:

                    C:\> EPM *.doc d:\test\temp*.*


ΓòÉΓòÉΓòÉ <hidden> Help for INI File Location ΓòÉΓòÉΓòÉ

Enhanced Editor stores configuration information in an EPM.INI file.  When you
start Enhanced Editor for the first time, it asks you for the location of this
file. If you have an EPM.INI file from a previous release, give the path to it
here. If not, supply the directory where you would like the new one to be
created. The default is C:\OS2, which is where OS/2* keeps its .INI files.


ΓòÉΓòÉΓòÉ 130. Edit Ring ΓòÉΓòÉΓòÉ

The term ring is often used interchangeably with edit window.  This is because
each edit window contains a ring, which contains one or more files, and each
ring must be associated with an edit window.  The current file is the file that
is displayed by the edit window.  Other files in the ring can be displayed by
use of the Next File and Previous File operations.

When you Add files, you begin to see why it's called a ring. You can move
"forward" or "backward" around the ring, using the Next file and Previous file
operations.

When you add a new file to the ring, it is inserted after the current file, and
then becomes the current file.

Initially, the ring is disabled, and you are limited to only one file per
window.

Related Information:

Enabling the edit ring


ΓòÉΓòÉΓòÉ 130.1. Enabling the Edit Ring ΓòÉΓòÉΓòÉ

To enable the edit ring or load multiple files:

 1. Select Options.
 2. Select Preferences.
 3. Select Ring enabled.


ΓòÉΓòÉΓòÉ 131. Stream Versus Line Mode ΓòÉΓòÉΓòÉ

There are two basic types of editors for editing text files, a stream editor
and a line editor.  A stream editor treats the file as one long stream of text.
A line editor treats the file as a series of individual lines, separated by a
line end character.

Stream mode
          In a stream editor, a new-line character (generally an ASCII
          line-feed character) is treated like any other character.  It can be
          inserted into the text stream, breaking the line into two at that
          point, or it can be deleted from the text stream, joining the two
          lines on either side of it.  As you move the cursor left and right,
          when it passes the beginning or end of one line, it moves to the end
          or beginning of the next - because although you see individual lines
          on the display, it's actually one long stream internally.  Also, when
          you move the cursor up and down, if you move it over a shorter line,
          the cursor bounces to the left; if you continue moving it up or down
          to a longer line, it bounces back to the original column.
Line mode
          The Enhanced Editor is a line editor.  If you move the cursor left or
          right, it stays on that line.  You can move the cursor beyond the end
          of the line.  If you do so, and then start typing text, the editor
          will fill in spaces between the previous end of the line and the
          characters you have added.  Since the new-line character does not
          actually exist in the file once loaded, there is no concept of
          inserting or deleting a new-line.  Pressing the Enter key  (by
          default; another key can be chosen) adds a new line after the current
          line, but it doesn't split the line; it adds a new, empty line
          between the current line and the following line, regardless of the
          cursor position.

Since some users are accustomed to using a stream-mode editor, the Enhanced
Editor can be configured to act like one.

Related Information:

Enabling stream-mode editing


ΓòÉΓòÉΓòÉ 131.1. Enabling Stream-Mode Editing ΓòÉΓòÉΓòÉ

To enable stream-mode editing:

 1. Select Options.
 2. Select Preferences.
 3. Select Stream editing.


ΓòÉΓòÉΓòÉ 132. Bookmarks ΓòÉΓòÉΓòÉ

A bookmark is a reference to a particular point in a file. When a bookmark is
created, it is given a name, which is associated with the character at the
cursor position.  If that character is moved around in the file, the bookmark
moves with it.  If that character is deleted, the bookmark is deleted along
with it.

If a bookmark is set as a permanent bookmark, it is saved when the file is
saved, and reloaded when the file is loaded.  The bookmark is stored as an
extended attribute. If the file is edited with an editor that does not preserve
extended attribute information, the bookmarks will be lost.  If a file
containing bookmarks is edited with an editor that does preserve attributes,
but cannot handle Enhanced Editor's bookmarks, then the line and column
information will not be updated, and the next time the file is loaded into the
Enhanced Editor,  the bookmarks might not be accurate.


ΓòÉΓòÉΓòÉ 133. Help for File ΓòÉΓòÉΓòÉ

Use File to open, save, change the name of, or print a file.


ΓòÉΓòÉΓòÉ 134. Help for New ΓòÉΓòÉΓòÉ

Use New to replace the current file with a new file named .Untitled.  You must
name the file by using Rename.  If the current file has been modified, you will
be asked if you want to save it before continuing.

Related Information:

Rename


ΓòÉΓòÉΓòÉ 135. Help for Open ΓòÉΓòÉΓòÉ

Use Open to open a new edit window.  A window appears, in which you can type
the names of one or more files.  If you select Open without typing a name,
.Untitled is used as the file name.

Related Information:

OPEN


ΓòÉΓòÉΓòÉ 136. Help for Open .Untitled ΓòÉΓòÉΓòÉ

Use Open .Untitled to open a new edit window with .Untitled used as the file
name.

Related Information:

OPEN


ΓòÉΓòÉΓòÉ 137. Help for Import Text File ΓòÉΓòÉΓòÉ

Use Import text file to retrieve a file and insert it into the current file
being edited.  The file is inserted starting after the current line.

A window appears, in which you can type the name of the desired file.

Related Information:

GET


ΓòÉΓòÉΓòÉ 138. Help for Add File ΓòÉΓòÉΓòÉ

Use Add file to add files to the current edit window.  A window appears, in
which you can type the name of one or more files.


ΓòÉΓòÉΓòÉ 139. Help for Rename ΓòÉΓòÉΓòÉ

Use Rename to change the name of the file being edited. A window appears ready
for you type a file name.

Related Information:

NAME


ΓòÉΓòÉΓòÉ 140. Help for Save ΓòÉΓòÉΓòÉ

Use Save to store the current file on disk.

Related Information:

SAVE


ΓòÉΓòÉΓòÉ 141. Help for Save As ΓòÉΓòÉΓòÉ

Use Save as to assign a name to the current file, then store the file on disk.
It is equivalent to Rename followed by Save.


ΓòÉΓòÉΓòÉ 142. Help for Save and Quit ΓòÉΓòÉΓòÉ

Use Save and Quit to store the current file and, if there were no errors
storing it, remove the file from the edit window.  If this is the only file in
the current edit window, the window closes.

Related Information:

FILE


ΓòÉΓòÉΓòÉ 143. Help for Quit ΓòÉΓòÉΓòÉ

Use Quit to remove the current file from the edit window. If there are unsaved
changes, you are asked if you wish to save the changes, discard them, or cancel
the Quit.  When you quit the last file in the edit window, the window closes.

Related Information:

o FILE
o QUIT


ΓòÉΓòÉΓòÉ 144. Help for Print File ΓòÉΓòÉΓòÉ

Use Print file to print the current file.

Related Information:

PRINT


ΓòÉΓòÉΓòÉ 145. Help for Edit ΓòÉΓòÉΓòÉ

Use Edit to work with marks, access the clipboard, and undo changes you have
made to the file.


ΓòÉΓòÉΓòÉ 146. Help for Undo ΓòÉΓòÉΓòÉ

Use Undo to display up a window, which enables you step through the changes you
have made to the file.


ΓòÉΓòÉΓòÉ 147. Help for Copy Mark ΓòÉΓòÉΓòÉ

Use Copy mark to copy the marked text to the current cursor position.

Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 148. Help for Move Mark ΓòÉΓòÉΓòÉ

Use Move mark to move the marked text to the current cursor position.

Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 149. Help for Overlay Mark ΓòÉΓòÉΓòÉ

Use Overlay mark to overwrite the text at the current cursor position with a
copy of the marked text.

Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 150. Help for Adjust Mark ΓòÉΓòÉΓòÉ

Use Adjust mark to overwrite the text at the current cursor position with the
marked text and leave blanks in place of the source text.

 Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 151. Help for Style ΓòÉΓòÉΓòÉ

Use Style to change the font or color of the marked text.

Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 152. Help for Unmark ΓòÉΓòÉΓòÉ

Use Unmark to remove any mark that exists in this window. The marked text is
not changed.

Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 153. Help for Delete Mark ΓòÉΓòÉΓòÉ

Use Delete mark to erase the marked text.  If the mark is a block mark, the
text that is marked is erased, but the space remains in the file.

Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 154. Help for Push Mark ΓòÉΓòÉΓòÉ

Use Push mark to save the location of a mark.  You can then select Unmark, mark
other text, manipulate it, and then select Pop mark to restore the original
mark.

Note:  Only the boundary of the mark is saved, not the contents.

 Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 155. Help for Pop Mark ΓòÉΓòÉΓòÉ

Use Pop mark to restore the location of a previous mark.

Related Information:

o Marking text
o Mark types
o Mark operations


ΓòÉΓòÉΓòÉ 156. Help for Push Cursor ΓòÉΓòÉΓòÉ

Use Push cursor to save the current cursor position.  You can later select Pop
cursor to jump back to the same place in the same file.

Related Information:

Pop Cursor


ΓòÉΓòÉΓòÉ 157. Help for Pop Cursor ΓòÉΓòÉΓòÉ

Use Pop cursor to restore the previous cursor position.

Related Information:

Push Cursor


ΓòÉΓòÉΓòÉ 158. Help for Copy ΓòÉΓòÉΓòÉ

Use Copy to copy the marked text to the clipboard.

Related Information:

o PASTE
o COPY2CLIP


ΓòÉΓòÉΓòÉ 159. Help for Cut ΓòÉΓòÉΓòÉ

Use Cut to copy the marked text to the clipboard, and then delete it from EPM.

Related Information:

CUT


ΓòÉΓòÉΓòÉ 160. Help for Paste Lines ΓòÉΓòÉΓòÉ

Use Paste lines to copy text from the clipboard into the current file,
following the cursor position.  Each line of text in the clipboard is added as
a new line in EPM.

Related Information:

PASTE


ΓòÉΓòÉΓòÉ 161. Help for Paste ΓòÉΓòÉΓòÉ

Use Paste to insert text from the clipboard into the current file, following
the cursor position.  The text from the clipboard is treated as a character
mark - that is it is treated as a stream of text, possibly containing embedded
line breaks, rather than as a series of lines.

Related Information:

PASTE


ΓòÉΓòÉΓòÉ 162. Help for Paste Block ΓòÉΓòÉΓòÉ

Use Paste block to insert text from the clipboard into the current file,
following the cursor position.  The clipboard text is treated as a block mark,
surrounded by the smallest possible bounding rectangle.

Related Information:

PASTE


ΓòÉΓòÉΓòÉ 163. Help for Print Mark ΓòÉΓòÉΓòÉ

Use Print mark to print a copy of the marked text.

Related Information:

Marking text


ΓòÉΓòÉΓòÉ 164. Help for Undo Line ΓòÉΓòÉΓòÉ

Use Undo line to reverse any changes that you just typed on the current line.
If you select this in error, you can immediately select it again to redo the
changes. Once you move the cursor off the line, the changes are committed and
you cannot use Undo line to remove them, instead; you must use Undo.

Related Information:

Undo


ΓòÉΓòÉΓòÉ 165. Help for Recover Mark Delete ΓòÉΓòÉΓòÉ

Use Recover mark delete to restore accidentally deleted text.  When you select
Delete mark, the deleted text is stored in a buffer.  Recover mark delete
retrieves the text from the buffer and inserts it after the current cursor
position.

Note:  You can delete text from one place and restore it in another.


ΓòÉΓòÉΓòÉ 166. Help for Search ΓòÉΓòÉΓòÉ

Use Search to find and change text, and to work with bookmarks.


ΓòÉΓòÉΓòÉ 167. Help for Search ΓòÉΓòÉΓòÉ

Use Search to display the Search window, which enables you to search through
the file or change one string to another.


ΓòÉΓòÉΓòÉ 168. Help for Find Next ΓòÉΓòÉΓòÉ

Use Find next to repeat the previous Find command.


ΓòÉΓòÉΓòÉ 169. Help for Change Next ΓòÉΓòÉΓòÉ

Use Change next to repeat the previous Change command.


ΓòÉΓòÉΓòÉ 170. Help for Bookmarks ΓòÉΓòÉΓòÉ

Use Bookmarks to create, list and find bookmarks in the current file.  The
options are:

Set       Displays a window that enables you to create a bookmark at the
          current cursor position.
List      Displays a list of bookmarks for the current file.  You can place the
          cursor at a particular bookmark by selecting it from the list.
Next      Places the cursor at the next bookmark.
Previous  Places the cursor at the previous bookmark.


ΓòÉΓòÉΓòÉ 171. Help for Options ΓòÉΓòÉΓòÉ

Use Options to list the files in the ring, query autosave values, review
previously-displayed editor messages, and configure the editor.


ΓòÉΓòÉΓòÉ 172. Help for List Ring ΓòÉΓòÉΓòÉ

Use List ring to list the files in the edit ring.  Files that have been
modified and not yet saved are preceded by a period. From the list, you can
select any file and make it the current file.


ΓòÉΓòÉΓòÉ 173. Help for Proof ΓòÉΓòÉΓòÉ

Use Proof to check the spelling in a file.


ΓòÉΓòÉΓòÉ 174. Help for Proof Word ΓòÉΓòÉΓòÉ

Use Proof word to check the spelling of the word at the current cursor
position.


ΓòÉΓòÉΓòÉ 175. Help for Synonym ΓòÉΓòÉΓòÉ

Use Synonym to suggest a synonym for the word at the current cursor position.


ΓòÉΓòÉΓòÉ 176. Help for Preferences ΓòÉΓòÉΓòÉ

Use Preferences to switch edit-window options or display the Settings window.


ΓòÉΓòÉΓòÉ 177. Help for Settings ΓòÉΓòÉΓòÉ

Use Settings to display a window, from which you can change editor
configuration settings (such as color and fonts).


ΓòÉΓòÉΓòÉ 178. Help for Set Enter ΓòÉΓòÉΓòÉ

Use Set enter to change the action of the Enter key (in its various shift
states).  You can select the Enter key on the main portion of the keyboard or
the Enter key on the numeric keypad portion of the keyboard alone or in
combination with the Alt, Ctrl or Shift key.

Each of these eight keys or key combinations can be set to one of six actions.
This setting is applied when the editor is in line mode. When the editor is in
stream mode, a different action is performed, regardless of how the keys were
set.  See Stream versus Line mode for details.

Related Information:

Stream versus Line mode


ΓòÉΓòÉΓòÉ 179. Help for Advanced Marking ΓòÉΓòÉΓòÉ

Use Advanced marking to switch between the CUA marking mode and the advanced
EPM marking mode.  The mode of marking that you use affects the way your mouse
works.

A check mark appears next to this choice if it is currently active.

Related Information:

Configuring the mouse


ΓòÉΓòÉΓòÉ 180. Help for Stream Editing ΓòÉΓòÉΓòÉ

Use Stream editing to switch between stream-mode and line-mode editing.

A check mark appears next to this choice if it is currently active.

Related Information:

Stream versus Line mode


ΓòÉΓòÉΓòÉ 181. Help for Ring Enabled ΓòÉΓòÉΓòÉ

Use Ring enabled to allow multiple files to exist in the edit ring.  The edit
ring always exists, but unless you select this option, the editor prevents you
from loading more than one file into it.

A check mark appears next to this choice if it is currently active.

Related Information:

Edit Ring


ΓòÉΓòÉΓòÉ 182. Help for Swap Mark ΓòÉΓòÉΓòÉ

Use Swap mark to exchange the current mark with the topmost mark on the stack
(the most recently pushed mark).

Related Information:

Push mark


ΓòÉΓòÉΓòÉ 183. Help for Swap Cursor ΓòÉΓòÉΓòÉ

Use Swap cursor to exchange the current cursor position with the topmost
position on the stack (the most recently pushed position).

Related Information:

Push cursor


ΓòÉΓòÉΓòÉ 184. Help for Stack Commands ΓòÉΓòÉΓòÉ

Use Stack commands to enable or disable the stack-related commands on the Edit
menu.

The stack commands are:

o Push mark
o Pop mark
o Swap mark
o Push cursor
o Pop cursor
o Swap cursor

A check mark appears next to your selection.


ΓòÉΓòÉΓòÉ 185. Help for Autosave ΓòÉΓòÉΓòÉ

Use Autosave to display the autosave file name and the number of changed lines
per autosave. You can also list the autosave directory.


ΓòÉΓòÉΓòÉ 186. Help for Messages ΓòÉΓòÉΓòÉ

Use Messages to review displayed editor messages.


ΓòÉΓòÉΓòÉ 187. Help for Frame Controls ΓòÉΓòÉΓòÉ

Use Frame controls to configure various edit window frame controls.


ΓòÉΓòÉΓòÉ 188. Help for Status Line ΓòÉΓòÉΓòÉ

Use Status line to switch the status line on and off.

A check mark appears next to this choice if it is currently active.


ΓòÉΓòÉΓòÉ 189. Help for Message Line ΓòÉΓòÉΓòÉ

Use Message line to switch the message line on and off.

A check mark appears next to this choice if it is currently active.


ΓòÉΓòÉΓòÉ 190. Help for Scrollbars ΓòÉΓòÉΓòÉ

Use Scrollbars to toggle the scroll bars on and off.

A check mark appears next to this choice if it is currently active.


ΓòÉΓòÉΓòÉ 191. Help for File Symbol ΓòÉΓòÉΓòÉ

Use File symbol to switch the file symbol on and off.

A check mark appears next to this choice if it is currently active.


ΓòÉΓòÉΓòÉ 192. Help for Rotate Buttons ΓòÉΓòÉΓòÉ

Use Rotate buttons to switch the rotate buttons on and off.

A check mark appears next to this choice if it is currently active.


ΓòÉΓòÉΓòÉ 193. Help for Info at Top ΓòÉΓòÉΓòÉ

Use Info at top to switch the position of the Information window between the
top and the bottom of the edit window.  The information window is composed of
the status line and the message line.

A check mark appears next to this choice if it is currently active.


ΓòÉΓòÉΓòÉ 194. Help for Prompting ΓòÉΓòÉΓòÉ

Use Prompting to control if prompts are displayed when menu choices are
selected.  Displaying the prompts forces the Information window to be displayed
at the bottom of the edit window instead of at the top.

A check mark appears next to this choice if it is currently active.

Note:  The menu prompting is done through an internal command that is called
       whenever a menu choice is selected.  Therefore, the prompting will not
       appear while another command is processing.  This ensures that you will
       always be able to select Halt command to stop processing.

Related Information:

Halt command


ΓòÉΓòÉΓòÉ 195. Help for Save Options ΓòÉΓòÉΓòÉ

Use Save options to store the font and frame controls. The next time an edit
window is opened, these same settings are used.


ΓòÉΓòÉΓòÉ 196. Help for Book Icon ΓòÉΓòÉΓòÉ

Use Book icon to activate the EPM book icon, from which you can close EPM or
list all edit windows.


ΓòÉΓòÉΓòÉ 197. Help for Command ΓòÉΓòÉΓòÉ

Use Command to bring up the EPM command line, or to halt a long-running command
before it finishes.


ΓòÉΓòÉΓòÉ 198. Help for Command Dialog ΓòÉΓòÉΓòÉ

Use Command dialog to enter editor commands.


ΓòÉΓòÉΓòÉ 199. Help for Halt Command ΓòÉΓòÉΓòÉ

Use Halt command to stop a command.


ΓòÉΓòÉΓòÉ 200. Help for Create Shell ΓòÉΓòÉΓòÉ

Use Create shell to create a command shell, an OS/2 command prompt where you
can type commands.  The output appears in an edit window while other programs
are running.


ΓòÉΓòÉΓòÉ 201. Help for Write to Shell ΓòÉΓòÉΓòÉ

Use Write to shell to write a string to the command shell. The string is
generally a command, but can also be the response to a prompt in the shell
window.


ΓòÉΓòÉΓòÉ 202. Help for Destroy Shell ΓòÉΓòÉΓòÉ

Use Destroy shell to quit the command shell and delete the associated command
process.


ΓòÉΓòÉΓòÉ 203. Help for Quick Reference ΓòÉΓòÉΓòÉ

Use Quick reference to view the Information in the quick reference file.


ΓòÉΓòÉΓòÉ 204. Help for Product Information ΓòÉΓòÉΓòÉ

Use Product information to display the copyright and version number for EPM.


ΓòÉΓòÉΓòÉ 205. Help for IBM ΓòÉΓòÉΓòÉ

Use IBM to display copyright and version number information about EPM.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

Prints the text to the selected printer using the default printer font.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

A symbol that shows that a choice is currently active.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

An extended ASCII character can be entered in a KEY or LOOPKEY command as
follows:

a+x
          Alt+X, where "x" is any alphabetic key.
c+x
          Ctrl+X, where "x" is any alphabetic key.
Fn
          Function key N, where "n" is 1 to 12.
x+Fn
          shifted Function key N, where "n" is 1 to 12, and "x" can be "s" for
          Shift, "a" for Alt, or "c" for Ctrl.

In the above, "+" can actually be "+", "-", or "_".  For example:

KEY 10 c-F8


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

An area of computer memory, or storage, that temporarily holds data.  Data in
the clipboard is available to other programs.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

The visual indicator in a slider that shows that the numerical value can be
changed by manipulating it. See also slider.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

A control that represents a quantity and its relationship to the range of
possible values for that quantity.  In some cases, you can change the value of
the quantity.  See also slider arm.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

A family of characters of a given size and style; for example,9-point
Helvetica.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

A symbol that shows that a choice is currently active.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

Additional information that the system or a program associates with a file.
The file system or program then uses this information, which is not visible to
you, to recognize the file.