home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Action Ware 12: Heretic & Hexen
/
actionware12.iso
/
acware12
/
utility
/
d2h
/
d2h.txt
< prev
Wrap
Text File
|
1995-02-16
|
2KB
|
44 lines
Thank you for downloading the GATEKEEPER DOOM to HERETIC PWAD Importer v1.0!
DISCLAIMERS
───────────
id Software CAN NOT and WILL NOT provide any support for any GATEKEEPER
utility.
Raven Software CAN NOT and WILL NOT provide any support for any GATEKEEPER
utility.
The author of GATEKEEPER will not provide any help for any reason in the
unlikely event that GATEKEEPER destroys any software and/or hardware and
in turn does not accept responsibility for any of the occurances mentioned
here.
The author of GATEKEEPER reserves the right to add or remove any functional
portion or portions from the GATEKEEPER software.
USING D2H
─────────
#1. To use the D2H.EXE utility, unzip the file into a directory of your
choice. I would recommend that directory be the HERETIC directory
though.
#2. Copy the PWAD file to convert over to the directory containg D2H. Be
sure to make a backup of your PWAD file. D2H is rather failsafe but it
doesn't hurt to play it safe.
#3. Change to the directory containing D2H and your PWAD file then at the
DOS prompt, type the following command replacing WADFILE.WAD with the
name of the PWAD you want to convert.
C:\HERETIC>d2h wadfile.wad
It's that simple!
#4. To run your PWAD file, type the following command from the HERETIC
directory. Make sure your PWAD file is in the HERETIC directory also.
This is not neccessary but is recommended.
C:\HERETIC>heretic -file wadfile.wad