home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software of the Month Club 1995 December
/
SOFM_Dec1995.bin
/
pc
/
dos
/
edu
/
mscope
/
mic_cfg.dta
< prev
next >
Wrap
Text File
|
1995-10-31
|
18KB
|
281 lines
'SETUP & CFG control file for Microscope Ver 2.0 International
'(c) Molcol Software 1994 (UK)
'
'
'International Support: Microscope is designed to work on a PC
' using code page 850 with the relevant
' DOS KEYB country code established to
' identify correct ASCII codes.
'
' e.g PO=Portuguese, UK=United Kingdom
'===============================================================
'Note: The area called initial is written to on each start up
' of SETUP.EXE
'
'DETERMINE LANGUAGE FILES PRESENT ON DISC AND MARK WITH Yes/No
'
-INITIAL
'
*CFGFILE = MIC2.CFG
'
*LANGUAGE = ENGLISH FILE=UK.LNG <ENABLE =Y
*LANGUAGE = PORTUGUESE FILE=PO.LNG ENABLE =N
*LANGUAGE = FRENCH FILE=SU.LNG ENABLE =N
*LANGUAGE = SPANISH FILE=SP.LNG ENABLE =N
*LANGUAGE = GERMAN FILE=GR.LNG ENABLE =N
*LANGUAGE = DUTCH FILE=DU.LNG ENABLE =N
*LANGUAGE = BRAZILIAN FILE=BR.LNG ENABLE =N
*LANGUAGE = ITALIAN FILE=IT.LNG ENABLE =N
*LANGUAGE = SWEDISH FILE=SV.LNG ENABLE =N
*LANGUAGE = NORWEGIAN FILE=NO.LNG ENABLE =N
'
*PROMPT_UK = Use <spacebar> to select language press <escape>
*PROMPT_PO = Use <spacebar> to select language press <escape>
*PROMPT_SU = . .
*PROMPT_SP = . .
*PROMPT_GR = . .
*PROMPT_DU = . .
*PROMPT_BR = . .
*PROMPT_IT = . .
*PROMPT_SV = . .
*PROMPT_NO = . .
'
*SCREEN_UK = (1) English (2) International
*SCREEN_UK = Press number key to select screen layout 1 or 2
*SCREEN_UK = Select International if English is poor: (2)
'
*SCREEN_PO = (1) Inglês (2) Internacional
*SCREEN_PO = Press number key to select screen layout 1 or 2 <<<
*SCREEN_PO = Recomendaçäo: Internacional (2) <trans<<<
'
*SCREEN_SU = . .
'
*SCREEN_SP = . .
'
*SCREEN_GR = . .
'
*SCREEN_DU = . .
'
*SCREEN_BR = . .
'
*SCREEN_IT = . .
'
*SCREEN_SV = . .
'
*SCREEN_NO = . .
'
*SCREEN_1 = ENGLISH UKSCRN.QPX <
*SCREEN_2 = INTERNATIONAL INTSCRN.QPX
'
+INITIAL END ---------------------------------------------------
'
-GLOBAL
'
'This section is global to all Microscope modules
'
'Picture libraries and exec file names:-
'
*PIC_LIB = {Main pic lib} MICPICS2.QPL
*MENU_RET = {Internal Menu} MSCOPE2.EXE
*MENU_SCRN = {Locked screen} MICLOCK.QPX
'When used: __ replaced with correct country code
*MENU_TIT = {core title pic} TITUK.QPX
'
'
*MOD_1 = {Microscope v2} MSCOPE2.EXE
*MOD_2 = {Slideset Mngmnt} MIC_CTRL.EXE
*MOD_3 = {Setup Microscope}SETUP.EXE
*MOD_4 = {user notes dbf} MICNOTES.EXE
*MOD_5 = {Windows Presntr} MICWIN.EXE
*MOD_6 = {Access to Manual}MICMAN2.EXE
*MOD_7 = {Brunel cat prgm} BRUNEL.EXE
*MOD_8 = {Book Lib. ctrl} MICBOOKS.EXE
*MOD_9 = {Contacts ctrl} MICPALS.EXE
*MOD_10 = {Dos Presenter} MICDOS.EXE
*MOD_11 = {Microscope shell}MICSHELL.EXE
*MOD_12 = {Optical compan} OPTICAL.EXE
*MOD_13 = {Colony prgm} COLONY2.EXE
*MOD_14 = {Create tuts} SCOPETUT.EXE
*MOD_15 = {RESERVED}
*MOD_16 = {Toolbox} MICTOOLS.EXE
*MOD_17 = {User Photos} MICUSER.EXE
*MOD_18 = {Auto News reader}MICNEWS.EXE
*MOD_19 = {Menuhelp file} MICHELP.EXE
*MOD_20 = {QUIT} [PROTECTED] Y
'
'
'
'
*COPY_UK
MICROSCOPE v2.0 International (c) Molcol Software 1994 - 95
Mouse Driver inactive! Press <escape> and run mouse.com!
Use Mouse: Left button to select, Right Button for information.
*COPY_PO
Microscópio v2.0 Internacional Direitos: Molcol Software 1994/5
<translation reqd> mouse error
<translation reqd> use mouse
*COPY_SU
'
'
'
*COPY_SP
'
'
'
*COPY_GR
'
'
'
*COPY_DU
'
'
'
*COPY_BR
'
'
'
*COPY_IT
'
'
'
*COPY_SV
'
'
'
*COPY_NO
'
'
'
+GLOBAL END
'
-UKAREA ...................start of UK section.............
'
*RESPONSE = RAPID 150
*RESPONSE = FAST 250
*RESPONSE = NORMAL 350 <
*RESPONSE = SLOW 500
*TEXT = BUTTON RESPONSE TIME
Vary the response time to the mouse button being clicked.
Note: Mouse button release is not monitored by the software.
(Recommended setting = Normal)
'
*CLICKON = OFF 0
*CLICKON = ON -1 <
*TEXT = BUTTON CLICK
Produce an audible click through the PC speaker when the mouse
button is pressed.
(Recommended setting = ON)
'
*CLICKWARN = OFF 0
*CLICKWARN = ON -1 <
*TEXT = INVALID WARNING BEEP
Produce an audible BEEP when mouse clicked on a non-available
option. Note: Useful to have ON while learning to use software!
(Recommended setting = ON)
'
*FLASHWARN = OFF 0
*FLASHWARN = RAPID 1000
*FLASHWARN = FAST 2000
*FLASHWARN = NORMAL 3000 <
*FLASHWARN = WAIT 6000
*TEXT = FLASH INVALID OPTION NOTICE
Flash a quick note to the screen when a control button is
pressed for a non-operation or as part of a general warning.
Can be turned ON or OFF during a session (! option) if set to
anything now other than OFF. (Recommended setting = NORMAL).
'
*AUTOHELP = OFF 0
*AUTOHELP = INTELLIGENT 1 <
*AUTOHELP = AUTO 2
*AUTOHELP = MANUAL 3
*TEXT = NON-MANUAL HELP MESSAGES
Automatically displays help messages dependent on the level set
here. Can be turned OFF and ON during a session- see (A) option
near HELP button on main screen - but only if set here to
anything other than OFF. (Recommended setting = INTELLIGENT)
'
*NAMEDELAY = RAPID 500
*NAMEDELAY = FAST 1000
*NAMEDELAY = NORMAL 2000 <
*NAMEDELAY = SLOW 4000
*TEXT = FLASH SLIDE NAME TO SCREEN
Displays the name of the slide being viewed, for the time set
here, when the NAME button is pressed.
(Recommended setting = NORMAL).
'
*GENERAL
'
' General UK text area
'
*GENERAL_END
+UK_END 'end of section for UK ---------
-POAREA ...................start of PO section.............
'
*RESPONSE = Rápido 150
*RESPONSE = Veloz 250
*RESPONSE = Norma 350 <
*RESPONSE = Lento 500
*TEXT = BUTTON RESPONSE TIME
Set program response time to the mouse button being clicked.
Note: Mouse button release is not monitored by the software.
(Recommended setting = Normal)
'
*CLICKON = Apagoda 0
*CLICKON = Activar -1 <
*TEXT = BUTTON CLICK
Produce an audible click through the PC speaker when the mouse
button is pressed.
(Recommended setting = ON)
'
*CLICKWARN = Apagoda 0
*CLICKWARN = Activar -1 <
*TEXT = INVALID WARNING BEEP
Produce an audible BEEP when mouse clicked on a non-available
option. Note: Useful to have ON while learning to use software!
(Recommended setting = ON)
'
*FLASHWARN = Apagoda 0
*FLASHWARN = Rápido 1000
*FLASHWARN = Veloz 2000
*FLASHWARN = Norma 3000 <
*FLASHWARN = Esperar 6000
*TEXT = FLASH INVALID OPTION NOTICE
Flash a quick note to the screen when a control button is
pressed for a non-operation or as part of a general warning.
Can be turned ON or OFF during a session (! option) if set to
anything now other than OFF. (Recommended setting = NORMAL).
'
*AUTOHELP = Apagoda 0
*AUTOHELP = Inteligente 1 <
*AUTOHELP = Automatico 2
*AUTOHELP = Manual 3
*TEXT = NON-MANUAL HELP MESSAGES
Automatically displays help messages dependent on the level set
here. Can be turned OFF and ON during a session- see (A) option
near HELP button on main screen - but only if set here to
anything other than OFF. (Recommended setting = INTELIGENTE)
'
*NAMEDELAY = Rápido 500
*NAMEDELAY = Veloz 1000
*NAMEDELAY = Norma 2000 <
*NAMEDELAY = Lento 4000
*TEXT = FLASH SLIDE NAME TO SCREEN
Displays the name of the slide being viewed, for the time set
here, when the NAME button is pressed.
(Recommended setting = NORMAL).
'
*GENERAL
'
' General PO text area
'
*GENERAL_END
+PO_END 'end of section for PO ---------