home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
World of Ham Radio 1997
/
WOHR97_AmSoft_(1997-02-01).iso
/
mods
/
ramsey
/
scakit_1.doc
< prev
Wrap
Internet Message Format
|
1997-02-01
|
1KB
From netcomsv!decwrl!sdd.hp.com!network.ucsd.edu!news-mail-gateway Mon May 17 21:01:39 PDT 1993
Article: 39839 of rec.radio.amateur.misc
Path: netcom.com!netcomsv!decwrl!sdd.hp.com!network.ucsd.edu!news-mail-gateway
From: dwilson@s850.mwc.EDU (David L. Wilson)
Newsgroups: rec.radio.amateur.misc
Subject: RE: Ramsey SCA Kit and pro-2004
Date: 17 May 93 23:27:32 GMT
Organization: UCSD Usenet Gateway
Lines: 15
Message-ID: <9305172323.AA16695@ucsd.edu>
References: <9305171721.AA26108@ucsd.edu>
NNTP-Posting-Host: ucsd.edu
Originator: daemon@ucsd.edu
The proper place to tap the PRO-2004 for SCA happens to be test point TP3
which is near the center of the main (LINEAR) PC board.
On the PRO-2005/6, it is test point TP1 which is under the smaller
covered enclosure parallel to connector CN1. (The 2004 test point is
not under a cover however.).
In both cases, tape the test point via a low (.01 uf will do) capacitor
but I suspect the Ramsey unit already has one.
Not sure about Canadian law but in the US, non-authorized SCA listening
is explicitly forbidden by the ECPA.
--
David L. Wilson INTERNET: dwilson@s850.mwc.edu
Phone: (703) 898-1084 (H) Amateur callsign: AC4IU