home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
World of Ham Radio 1997
/
WOHR97_AmSoft_(1997-02-01).iso
/
mods
/
kenwood
/
tm
/
tm732_2.doc
< prev
next >
Wrap
Text File
|
1997-02-01
|
2KB
|
55 lines
TM732.2
Forward from the Internet. . .
Article 17736 of rec.radio.amateur.misc:
From: flloyd@L1-A.West.Sun.COM (Fred Lloyd [Phoenix SE])
Subject: TM-732A MODIFICATION MATRIX
Date: 27 Apr 1992 22:10:57 GMT
Organization: Sun Microsystems, Phoenix, AZ
Summary: All Band Mods
THE FOLLOWING FEATURES ARE UNVERIFIED, SO
YOU MAY NEED TO EXPERIMENT FOR YOURSELF
PAGING ANSWERBACK (Does not work in K1 or E1 Mod modes)
The exact operation of this feature is unclear but the following
description has been given:
1. To enable, hold down the F key and press the TONE key.
2. Do disable, repeat step 1
When enabled, documentation says: "If a matching code is received
and the other transciever is no longer BUSY, the code of the local
transciever is sent to the other transciever. The answerback
function then turns off."
MEMORY RECOVERY (requires DTMF microphone)
(Documentation of this "feature" is difficult to comprehend but
perhaps someone will figure out what it does.. I suspect that
"RECOVERY" refers to returning the memories to their original
state after changing the split memory layout.)
1. Hold down F and C.SEL, turn on power
2. Press D, followed by 7 on the microphone. "Inspection Mode"
is now enabled.
3. To cancel, press and hold F and then C.SEL
"Note: Before recovery, the memory channels must be returned to
the previous state (number of split memories, etc.)."
--
| Fred Lloyd AA7BQ, Systems Engineer Fred.Lloyd@west.sun.com |
| Sun Microsystems Computer Corporation ...sun!flloyd |
| Phoenix, AZ (If it's a fact, I believe it!) (602) 275-4242 |