Labels:book | bulletin board | poster | reckoner | sky OCR: While avoiding contact with the pins remove the ROM IC52) and set it aside on anti i-static foam Unplug connectors 56 58 from Control board B/2. Remove brass screws from Control board (B DO not remove the fourth screw that connects to the angle bracket Instead remove the brass screw from Cont trol board (A/2 the angle bracket stays with the Gop board Fold the top board towards the body of the transcei iver Be very careful not to tress the flat bbon cables that are soldered be tween the two boards NOTE the foil side of the board not sufficiently exposed for deso lder cing purposes remove the hex bosses from the bottom Control board Pull both boards forwarc and open them ke book allow the best access to the foil side Control board B/2 10 Carefully desolder the socket and remove from the boar ...
.iso/mods/kenwood/servbull/asb0952b.jpg){kind=small}
.iso/mods/kenwood/servbull/asb0952a.jpg){kind=link}
.iso/mods/kenwood/servbull/asb0953.jpg){kind=link}