Labels:book | bulletin board | reckoner | sky OCR: Carefully pull up on the mount and rotate toward the front panel Swing the mount toward the right side ransce iver and all Low to rest the Digital unit shield Remove the screws from the Diqital unit shield plate. Lift the plate and rotate the left side of the transceiver 10 While avoiding contact wi th the pins remove the ROM (IC2) and set aside on anti -static foam Remove the screws that mount the Digital board Rotate the board toward the front panel expose the bottom side the board 12 Care fully desolder the socket and remove from the board. Do not up on the socket does not easily pull off the board the top foils are still soldered to the socket 13 Install the ROM in the board and solder place 14 Assemble the transceiver revers ing steps Do not pinch the power swi tch cables between the ...
.iso/mods/kenwood/servbull/asb0951b.jpg){kind=small}
.iso/mods/kenwood/servbull/asb0951a.jpg){kind=link}
.iso/mods/kenwood/servbull/asb0952a.jpg){kind=link}