Labels:book | bulletin board | earth | reckoner | sky | windowpane OCR: NOTE8 After each mixer stage, the SSG must be adjusted to the respective IF frequency AS an exampl Fter the first mixer on the TS-940S the frequency would be O5MHz After the second mixer the frequency would 83MH2 The levels 11 the audio stage of the receiver measured with an AF VTVM These measurements are made when the SSG connected to anterna nal ius fter the AT gain set PM RX SECTION LEVEL DIAGRAMS FM transceiver level diagrams are made the same fashi Lon close CW SSB to diagrams The transce ve tuned to its center frecuency for The audio it) low level ignal appl ied to the antenna terminal output held constant while inj ect on me thod used The differences fol] ows On some transceivers the inj iected signal modulated (typically 1KHz tone at OKH deviati ion used) Other transce ivers ire te ...
.iso/mods/kenwood/servbull/asb0941b.jpg){kind=small}
.iso/mods/kenwood/servbull/asb0941a.jpg){kind=link}
.iso/mods/kenwood/servbull/asb0941c.jpg){kind=link}