home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
World of Ham Radio 1997
/
WOHR97_AmSoft_(1997-02-01).iso
/
mods
/
kenwood
/
asb_text
/
asb0011.txt
< prev
next >
Wrap
Text File
|
1997-02-01
|
3KB
|
73 lines
==============================================================================
K E N W O O D
>>> A M A T E U R R A D I O S E R V I C E B U L L E T I N <<<
==============================================================================
Kenwood Service Centers
Kenwood Service Corporation Kenwood Service Center, East
2201 East Dominguez Street 829 Lynnhaven Parkway, Suite 130
Long Beach, California 90801 Virginia Beach, Virginia 23452
Telephone 1-310-639-5300 Telephone 1-804-340-1702
==============================================================================
BULLETIN # 11
MODEL: TR-2200A
SUBJECT: ADAPTING THE TR-2200A ANTENNA TO OTHER RADIOS
We have had several inquiries about adapting the TR-2200A whip
antenna to the Drake TR-22C and Trio TR-2200. We now have a
kit of parts to do this. Following is a copy of the instruction
sheet supplied with each kit.
TR-2200 Antenna Kit Instructions
No. Part Name Part Number Q'ty
1 Whip Antenna T90-0082-05 1
2 Antenna Connector J32-0230-04 1
3 Washer N19-0282-04 2
4 Insulating Ring N19-0283-04 2
5 Antenna Lug E23-0097-04 1
6 Nut N14-0116-04 1
7 Pipe F29-0018-14 1
8 Ground Lug E23-0015-04 3
9 Screw 3x6 mm 1
10 Cable with capacitor 1
1 - Remove original antenna
2 - Enlarge antenna hole to 9.5 mm
3 - Install parts 1 thru 8 as shown in the graphic
4 - Remove coaxial cable that runs from the original whip
antenna to the S0-239.
5 - Connect original coaxial cable from terminals ANT and E
to the external antenna connector (S0-239). (This cable
originally went from terminals ANT and E to the whip
antenna.)
6 - Locate the 2 "L" brackets mounting the TX unit to the
side and install 2 ground lugs between the bracket and
the side ot the unit.
7 - Install the coaxial cable so that the end with the
capacitor is at the S0-239.
8 - Solder the free end of the capacitor to the center pin
of the S0-239 and solder the coax braid to the ground
terminal.
9 - Mount the last ground lug wlth jXb mm screw at the hole
next to the whip antenna.
10 - Solder the braid of the supplied coax to the ground lug
installed in Step 9 and the center conductor of the coax
to the antenna lug 2.
11 - Carefully solder the coax braid to the 2 lugs installed
in Step 6. See graphic