home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
World of Ham Radio 1997
/
WOHR97_AmSoft_(1997-02-01).iso
/
mods
/
icom
/
icw21_1.doc
< prev
next >
Wrap
Text File
|
1997-02-01
|
939b
|
27 lines
ICOM IC W21AT Handi-Talkie modification
The Icom IC W21AT handi-talkie normally receives two bands:
136 to 174 MHz and 440 to 450 MHz.
You can program it to receive
50 to 300 MHz and 300 to 999 MHz.
To do this, turn it off, then simultaneously hold down
the # and the B keys while turning it on. Keep them pressed
for 2 seconds after turning the rig on.
The LCD display will go through a self test, and you'll
then have a wideband receiver. It's not very sensitive
far from the ham bands, but it's handy for listening to
6 Meters or as a portable scanner.
Note that this modification does not require any cutting of
diodes or rewiring -- it's entirely front panel.
Looking at the schematic, there is a way to
cut two diodes to permit transmitting outside the Ham bands (eg MARS).
However, I cannot find the diodes on the PC board (it's crowded in there!).
Cheers es 73's,
Cliff Stoll K7TA 10 July 1993 (stoll@ocf.berkeley.edu)