home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Elysian Archive
/
AmigaElysianArchive.iso
/
emulate
/
xdos302.lzh
/
READ.ME
< prev
next >
Wrap
Text File
|
1989-07-10
|
19KB
|
722 lines
wCrossDos
Version 3.02 READONLY w
wThe MS-DOS File System
w
CONSULTRON
11280 Parkview, Plymouth MI 48170
Copyright (c) 1988,1989, CONSULTRON. All Rights Reserved.
Author: Leonard Poma
Date: July 8th, 1989
CrossDos Version 3.02 READONLY
w1 INTRODUCTION
w
CrossDos is a software product that allows the user to read and
write MS-DOS/PC-DOS and Atari ST formatted disks (Version 2.0 or
higher) directly from AmigaDOS. It fully integrates itself into
the Amiga operating system to allow your MS-DOS formatted disks
to be accessed from virtually any utility or application. This
allows you to access any MS-DOS file just as you would any other
Amiga file. For more information about its features,
installation procedures and other relevant facts, refer to the
manual,
CrossDOS.manual
, supplied with this release.
NOTE
All further references to MS-DOS formatted disks also
apply to PC-DOS and Atari ST formatted disks unless
otherwise specified.
The release you presently have is a "READONLY" version of the
CrossDos. It is a fully functional version of the product with
all writing functions disabled. If any writes are attempted to
the MS-DOS disk you will get a "Write-Protected" requestor to
pop-up.
CrossDos should work on ANY Amiga (500, 1000, 2000, etc.) with
ANY hardware configuration. It also needs Version 1.2 (or
higher) of the Amiga operating system. If you should have any
problems with any configuration, let us know by calling the
Technical Support phone number or describing the problem in
written form.
We are using a marketing technique which we are calling
"TRYWARE" for this product. Try CrossDos and see if you like
it. Get comfortable with it. If you like it and you need the
capability to write to MS-DOS disks, fill in the order form
supplied in section "
ORDER FORM
" and send a check or
money-order for the modest amount requested.
A manual file is included with this "READONLY" release and it is
called
CrossDOS.manual
. This manual is written for the
user who has purchased the "READ/WRITE" version so that
references to functions that require the ability to write do not
apply for this release. Although the use of CrossDos is very
simple and user transparent, a comprehensive manual is supplied
for technical reference.
1-1
CrossDos Version 3.02 READONLY
w2 "TRYWARE"
w
What is "TRYWARE" you say? That is a valid question. Just as
the name implies, you try something. In this case, you try the
"READONLY" version of CrossDos. If you like it and you need to
write to MS-DOS disks, purchase the "READ/WRITE" version for a
modest amount.
We at CONSULTRON are just like anyone else. We would like to
try any software first before we "fork over the big bucks".
This is not a new idea, but it is sorely under-utilized. Others
have tried this idea in its various forms (ie. shareware), with
mixed success.
We at CONSULTRON are also trying something risky. We are
pricing this product well below what you might expect for
something of this complexity. The only way we can succeed at
this price is to cut overhead to the bone. When you buy any
commercial product, not only are you paying for the materials,
the development costs and support personnel, you are also paying
for advertising in magazines and other promotional effects. We
have nothing against commercial promotion, but those costs may
contribute anywhere from 10 to 50 percent to the cost of the
product.
We ask YOU to become the bulk of our advertising. Once you see
that this is a quality product, we hope you tell others about
it. In fact, make them a copy of this "READONLY" release so
that they may try it for themselves.
2-1
CrossDos Version 3.02 READONLY
w3 INSTALLATION
w
The installation instructions for mounting an MS-DOS device on
the Amiga is detailed in the following sections. A simple
program is included in this product for standard 3 1/2" or 5
1/4" floppy drive installation.
3.1 Installing the Software and MountList Parameters
CrossDos provides a simple installation script either executable
from the CLI only.
To execute the program from the CLI, type the following:
cd <directory where unarchived files are>
execute Install_MSDOSFS
If you wish to modifiy these standard parameters, edit the
mountlist file.
The files will be transferred by this script to the following
directories:
C:, LIBS:, L: and DEVS:
Some support files will not be transferred by this script.
NOTE
There is a bug in the Version 1.2 and Version 1.3
trackdisk.device code supplied with the Amiga operating
system. It only causes problems with this product if you
only have one 3 1/2" floppy drive. A patch program must be
executed prior to using this product. Two patchs,
TDPatch12 and TDPatch13 are included for Version 1.2 and
Version 1.3 respectively. Version 1.4 and beyond should
correct this problem.
3.2 Mounting a MS-DOS Device
Once all the required files are installed in the proper
directories, only "mounting" the device is needed to have the
Amiga recognize the MS-DOS device. The filesystem is "mounted"
by entering the command:
mount <devicename:> FROM DEVS:mountlist.msdosFS
The "mount" command can be entered manually when needed or can
be executed in a startup routine such as "S:startup-sequence".
3-1
CrossDos Version 3.02 READONLY
If "mounted" in a startup-sequence, it can be setup to consume a
minimal amount of memory (approx. 80 bytes) until MS-DOS file
acccess is required.
Once the device is successfully "mounted", the device can be
accessed by any utility or application by specifying the device
name.
3-2
CrossDos Version 3.02 READONLY
w4 FILE LIST
w
This is the current listing of the CrossDos Version 3.02
READONLY release:
c (dir)
Mount V1.3 compatible cmd to "mount" device
TDPatch12 trackdisk.device patch for V1.2
TDPatch13 trackdisk.device patch for V1.3
L (dir)
MSDOSFileSystem MS-DOS file system code
Devs (dir)
mfm.device mfm device driver code
mountlist.msdosFS partial mountlist for floppies
LIBS (dir)
arp.library ARP V1.3 library
Utilities (dir)
cmpPATH execution script to exercise filesystem
devinfo display device info
diskchk check disk blocks on any disk
diskchk.info
kill kill handler or filesystem
rawcopy diskcopy MS-DOS disks btw 2 drives
CrossDOS.manual The manual for this product
Install_msdosFS execution script for auto-installation
READ.ME This file
A format utility called "MFORMAT" will be provided in the
"READ/WRITE" version but not in this "READONLY" version.
If you need to format an MS-DOS disk, you can use the
PCUTILS/PCFORMAT utility found on the EXTRAS disk supplied with
your Amiga operating system.
A diskcopy utility called "MDISCOPY" will be provided in the
"READ/WRITE" version but in this "READONLY" version a utility
called "RAWCOPY" will be used instead.
Also included in the "READ/WRITE" version, is a more
comprehensive installation program.
4-1
CrossDos Version 3.02 READONLY
w5 COPYRIGHT
w
All software and documentation distributed in this product,
CrossDos Version 3.02 READONLY, Copyright (c) 1988,1989,
CONSULTRON. All Rights Reserved.
The "READONLY" version of this product is distributed as
"freely-distributable" providing the following conditions are
met:
- All files present in the distribution package must be
redistributed with the package, including this
documentation file. If you distribute on diskette, all
files must be on a single diskette.
- The distributor may charge a fee to recover distribution
costs. The fee for diskette distribution shall not exceed
$7.00 (U.S.) unless given written permission from
CONSULTRON.
- The distributor agrees to cease distributing this release
or any subsequent releases if requested to do so by
CONSULTRON.
- This product or any portion thereof may not be included in
any commercial product without obtaining licensing from
CONSULTRON.
Software programs contained in this product that were obtained
from the "public domain" retain their own copyrights. All
effort was made to distribute this software as it was received
(where ever possible). This software has been found to be very
useful in the creation of this product. I encourage the use of
these supplimentary software products and I also encourage
monetary remuneration where recommended.
5-1
CrossDos Version 3.02 READONLY
w6 DISCLAIMER
w
ALL EFFORT HAS BEEN MADE TO MAKE THIS PRODUCT, SOFTWARE AND
DOCUMENTATION, USEFUL AND ERROR FREE. SHOULD ANY ERRORS OR
PROBLEMS OCCUR, PLEASE CONTACT CONSULTRON PROMPTLY, IN WRITING,
STATING THE PROBLEM AS THOROUGHLY AS POSSIBLE.
THIS PRODUCT IS SOLD "AS IS" WITHOUT REPRESENTATION OR WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY REPRESENTATIONS OR ENDORSEMENTS REGARDING THE
USE OF, THE RESULTS OF, OR PERFORMANCE OF THE PRODUCT, ITS
APPROPRIATENESS, ACCURACY, RELIABILTY, OR CURRENTNESS. THE
ENTIRE RISK AS TO THE USE OF THE PRODUCT IS ASSUMED BY THE
USER.
COPY-PROTECTED MEDIA USED WITH THIS PRODUCT MAY NOT TRANSFER
DATA PROPERLY AND WILL ALTER DATA UNFAVORABLY IF THE MEDIA IS
WRITTEN TO.
IN NO EVENT WILL CONSULTRON, ITS AFFILIATED COMPANIES, NOR ITS
EMPLOYEES, BE LIABLE FOR ANY DAMAGES, DIRECT, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL, RESULTING FROM ANY DEFECT IN THE
PRODUCT, EVEN IF CONSULTRON HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
THIS DISCLAIMER SHALL SUPERSEDE ANY VERBAL OR WRITTEN STATEMENT
TO THE CONTRARY.
6-1
CrossDos Version 3.02 READONLY
w7 REVISION HISTORY
w
CrossDos versions prior to 3.01 are internally distributed.
Corrections were made in the following versions:
Version 3.02
- 'Divide by zero' guru when doing "info" on non-MSDOS
disks.
- Improved sector detection and recovery.
- Better Canadian pricing ($40 -> $36) to reflect current
exchange rate.
- Improved documentation.
7-1
CrossDos Version 3.02 READONLY
w8 MISCELLENEOUS SERVICES
w
The following are miscelleneous services provided by
CONSULTRON.
8.1 Dealer and Distributor Quantity Discounts
Dealer and Distributor quantity discounts are availiable.
Inquire by phoning the Technical Support line.
8.2 Licensing
Licensing of CrossDos in other commercial products is
availiable. We believe that many commercial applications can
benefit by the inclusion of this product particularly where data
formats are shared between the Amiga and MS-DOS applications.
Inquire by phoning the Technical Support line.
8.3 Technical Support
Technical support is provided to answer any questions about
CrossDos. Should you exhibit any problems with either release
of the product, contact someone at the support line for help or
bug reports. Inquire by phoning the Technical Support line.
Technical Support Line -- (313) 459-7271 9:00AM - 5:00PM EST
8-1
CrossDos Version 3.02 READONLY
w9 ORDER FORM
w
The pricing for CrossDos listed here is current for July 8th,
1989. We will try to maintain this pricing for this product but
we reserve the right to change this at any time. The READ/WRITE
version will be availiable after July 31st, 1989. This version
will include all the necessary files on diskette and a printed
manual.
PRICING SCHEDULE for CrossDos
(includes disk and printed manual)
Location Price Shipping and Handling
================================================================
| |
United States | $30.00 (US) + $3.00 (US)
______________________|____________________|___________________
| |
Canada | $36.00 (CDN) + $3.00 (CDN)
______________________|____________________|___________________
| |
Outside US and Canada | $(current market) + $8.00 (US equiv)
______________________|____________________|___________________
QTY ORDERED PRODUCT Cost/unit S&H/unit Cost Total
================================================================
| | | |
| CrossDOS -- MS-DOS | + =
_________|____________________|__________|_________|____________
|
Michigan State Sales Tax = x 4% |
(Michigan residents only) |
|____________
Total Cost |
|
Make all checks or money orders out to CONSULTRON.
Send the check and this order form to:
CONSULTRON
11280 Parkview
Plymouth, MI. 48170
INFORMATIONAL SURVEY (Optional)
(check all that apply)
I use an Amiga 1000[ ] 500[ ] 2000[ ] 2000HD[ ] 2500[ ] other[ ]
I have a 5 1/4" drive installed on my Amiga [ ]
I have an MS-DOS partition on my Amiga hard drive [ ]
I have an 68020 or 68030 board installed in the Amiga I use [ ]
9-1
TABLE OF CONTENTS
1 INTRODUCTION ................................... 1
2 "TRYWARE" ...................................... 1
3 INSTALLATION ................................... 1
3.1 Installing the Software and MountList Parameters 1
3.2 Mounting a MS-DOS Device ...................... 1
4 FILE LIST ....................................... 1
5 COPYRIGHT ...................................... 1
6 DISCLAIMER ..................................... 1
7 REVISION HISTORY ................................ 1
8 MISCELLENEOUS SERVICES .......................... 1
8.1 Dealer and Distributor Quantity Discounts ...... 1
8.2 Licensing .................................. 1
8.3 Technical Support ........................... 1
9 ORDER FORM ...................................... 1
I