home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Rockford Magazine
/
Rockford_Magazine_033_19xx_-_de_Disk_5_of_5_Side_B.d64
/
1210
< prev
next >
Wrap
Text File
|
2023-02-26
|
1KB
|
28 lines
Path: u.cc.utah.edu!pre7874
From: pre7874@u.cc.utah.edu (Perry Eidelbus)
Newsgroups: comp.sys.cbm
Subject: Re: CBM PET 3032 information wanted
Date: 4 Sep 1995 10:15:42 GMT
Organization: University of Utah Computer Center
Message-ID: <42ejke$i3r@news.cc.utah.edu>
References: <421bvb$3ij@tuegate.tue.nl> <42bq1a$n34@news.cc.utah.edu>
<1995Sep3.124405@nyssa.swt.edu>
NNTP-Posting-Host: u.cc.utah.edu
X-Newsreader: TIN [version 1.2 PL2]
Bo (ez13942@nyssa.swt.edu) wrote:
pre7874@u.cc.utah.edu (Perry Eidelbus) writes:
: > Perhaps you could wire a switch and resistor to the ground and reset pins
: > of the processor (6502?).
: Even easier way to do this is to connect the ground and the reset lines
: on either the user or expansion port to one of them spring buttons from
: ratshack. This is how I got a reset switch on my SX-64.
Very viable, too, but I don't know enough about this PET's ports, so I
don't want to suggest something impractical or impossible. On my 64, I
ended up connecting it to just inside the user port, so I could use my
modem.
Perry-beast