áááááááááááááááááááááááááááááááááááᢠWELCOME TO THE ANTIC MONTHLY DISK ¢ááá¿π⌐õ¨ÕÕ¼áIJ∈⌠Θπáס⌡Γ∮Θ≤ΦΘ∈τáח∈π«ááᢢMost of the programs on this disk are¢written in Atari BASIC. Some require¢special hardware or specific operating¢instructions. Please read the matching¢issue of ANTIC Magazine for complete¢documentation.¢¢SUBSCRIPTION Info & Orders:¢(800) 347-6969.¢¢BACK ISSUE Orders: (800) 234-7001¢(Visa or Mastercard only, please.)¢¢XXX¢² *** BONUS FILES * BONUS FILES ***²¢¢ We've included the five¢Micropainter files used in the¢HARDWIRE article. ANTIC.MIC and¢STARS.MIC were used to tile the¢floor and ceiling of the room.¢ ONE.MIC, TWO.MIC and¢THREE.MIC depict a sphere¢descending from the top left corner¢of the back of the room, to the¢lower front right corner of the¢room.¢¢¢XXX¢¢² *** > MORE BONUS FILES < ***²¢¢ If you're unhappy because¢your Atari 400 or 800 can't RUN¢HARDWIRE, here's the next best¢thing.¢ We've included our popular¢FADER II slideshow program, which¢you can use with the HARDWIRED¢picture files (above). FADER¢will work on your 400 or 800.¢XXX¢ Here's how to do it:¢¢ 1. Get another disk and¢format it with DOS 2 or 2.5, then¢Write The DOS Files to this disk.¢¢ 2. Next, copy FADERII.EXE¢and all the picture files to this¢disk. (Hint: All of the picture¢filenames end with ".MIC")¢XXX¢ 3. Now, rename FADERII.EXE¢to AUTORUN.SYS. Next, turn off¢your Atari, remove all cartridges¢(XL/XE owners hold down [OPTION])¢and turn on your Atari. The FADER¢program will automatically load¢and run.¢¢ You can also use FADER II to¢view any other Micropainter or¢Micro Illustrator (Koala) picture¢file. Micro Illustrator picture¢filenames should end in ".PIC"¢and Micropainter filenames can¢end in ".MIC".¢XXX¢¢¢¢¢ For complete information, read¢the FADER II documentation from the¢previous menu.¢¢¢¢²²²¢¢XXX¢¢The menu that appeared on the screen¢when you booted the disk will only¢RUN programs with a .BAS extender.¢If you try to run a program and the¢response is 'cannot run Filename',¢check the file extender with this¢list:¢XXX¢¢¢.BAS BASIC saved program, use menu¢ RUN or LOAD and RUN.¢.LST BASIC listed program, ENTER¢ then RUN.¢.EXE Assembly language 'Load and¢ Go' file. Remove BASIC, boot¢ DOS, type L then enter the¢ filename.¢.ASM Assembly language source code¢ (Atari Assembler Editor)¢ Must be compiled.¢.M65 "SAVEd" MAC/65 assembly ¢ language source code.¢ Must be compiled.¢¢XXX¢¢.PIC A picture file created with¢ Micro Illustrator software.¢.MIC A picture file created with¢ Micropainter software.¢.OBJ Machine language object file.¢ Same as .EXE but not 'Load and¢ Go'. See corresponding article.¢.SYS Reserved for DOS system files.¢.TXT Text file. Usually accessed¢ by another program.¢.ACT ACTION! language source code.¢ Must be compiled.¢.LGO A Logo program. Requires the¢ Logo cartridge.¢¢XXX¢¢All programs from ANTIC issues dated¢prior to August 1984 were reproduced¢from ANTIC's Archive. We've updated¢them from our HELP columns and¢most are compatible with the XL and¢XE machines. We have worked to insure¢that our programs operate as¢published, but we consider all our¢software listings to be works in¢progress which we encourage you to¢personalize and enhance.¢¢Good luck, and ENJOY!¢¢ -ANTIC ED¢¢əəəəəəəəəəəəəəəəəəəəəəəəəəəəəəəəə
