¢************************************¢ NAME OR RENAME ZONE DESCRIPTIONS¢ OPTION #1¢************************************¢Selecting option #1 will display all¢the zones and their current ¢description.¢You do not have to give the zones¢names but it could help while¢testing the system.¢If you decide to name the zones,¢select the letter next to the zone¢you want to name.¢The computer will then display that¢zones' current description.¢XXX¢¢The system will then prompt you to ¢input the new name. You can only use¢12 letters for the name. Please use¢only letters or the display screen¢will look funny.¢Zones 1 & 2 are the two zones that¢will work on the exit/entrance delay¢so I would recommend that these be ¢made the front and back doors.¢Once you have typed in the new names,¢press return and all the zones will¢again be displayed, including the¢new name you just put in.¢XXX¢¢Continue selecting the zones you want¢to change until all are labeled as¢you want them. Once you are done,¢press the letter "X", and you will¢return to the option menu.¢¢If you want to change other options¢you can do so now.¢¢*** DO NOT TURN THE COMPUTER OFF ***¢*** UNTIL YOU USE OPTION #6 ***¢*** THIS WILL SAVE YOUR CHANGES ***¢*** TO THE DISK DRIVE ***¢XXX¢