53446 The microphone connection test will listen for sound from your microphone and will beep every time it detects it.\n \nPress the button to start the test, then make a sound or speak into the microphone. If no sound is detected, try plugging the microphone line into a different jack. It will beep when you find the right jack.\n \nClick help if you have trouble getting the microphone to work. \n \nClick Next if the microphone is working properly.
53447 Exception in ClsSignalP::calcSpectrum()
53448 Error in Multimedia Code
53449 Setup Sound System
53450 Click next to continue.
53451 As you read this text, speak naturally. There's no need to pause. Use the same level of voice as when you dictate. Keep reading this paragraph until the text goes away and you hear a beep, which means the test is finished. During this test, the Audio Setup wizard adjusts the volume setting of your microphone. Once it has adjusted the volume, it measures several seconds of speech and calculates the quality of your sound system. This test should take less than a minute to complete.
53452 Next >
53453 &Stop Test
53454 &Start Test
53456 Very Low
53457 Normal
53458 Normal
53459 High
53460 High
53463 The volume has been set. Click next to continue.
53464 The wizard will now adjust your microphone volume.\n \nClick Start Test and read the following paragraph aloud, as if you were dictating.
53465 Unacceptable
53466 Below Average
53468 Average
53469 Above Average
53470 The sound system is already being used.\n\nTry shutting down any other applications which use the multimedia sound system.\n\n
53471 The sound system does not support the requested waveform-audio format.\n\nThis is probably because the Audio Setup wizard was not designed to work with this sound system.\n\nTry using a different sound system.\n\n
53472 Audio Setup wizard cannot find the sound system.\n\nTry checking if there is a multimedia sound system on your system.\n\n
53473 No device driver is present.\n\nTry checking if the driver software for your sound system was installed.\n\n
53474 Unable to allocate or lock memory.\n\nTry shutting down some other applications to free some memory.\n\n
53475 An invalid parameter was passed to Windows by the Audio Setup wizard.\n\nThis is probably due to a programming error.\n\n
53476 Click Help for more information.
53477 Windows returned the following error message:
53478 An error occurred.\n\n
53479 The sample rates and/or sample sizes supported by the sound system are not compatible with the Audio Setup wizard.\n\nClick Help for more information.
53480 The sample sizes supported by the sound system are not compatible with the Audio Setup wizard. The sound system supports 8 bit but not 16 bit wave data at 11 kHz.\n\nClick Help for more information.
53481 The sample rates supported by the sound system are not compatible with the Audio Setup wizard. The sound system supports sample rates 22 kHz and 44 kHz but not 11 kHz.\n\nClick Help for more information.
53482 Audio Setup wizard can not find any multimedia sound system installed on your system.\n\nThe Audio Setup wizard is compatible with many multimedia sound cards. Visit the Dragon Systems Website for information about choosing a sound system.\n\nA note to DDWin users: the Audio Setup wizard and Dragon NaturallySpeaking are not compatible with the M-ACPA sound system\n\nClick Help for more information.
53483 An error happened while the Audio Setup wizard was accessing your sound system.
53485 Test Status: Calculating
53487 Test Status: Waiting for speech...
53488 Test Status: Test Started
53489 Test Status: Done. Click Next.
53491 Test Status: Speech Detected, Adjusting Volume.
53492 Test Status: Test Stopped
53493 Test Status: No Speech Detected. Changing Volume.
53495
53496 Dragon Systems Audio Setup Wizard - Step 1 of 9
53497 Dragon Systems Audio Setup Wizard - Step 2 of 9
53498 Dragon Systems Audio Setup Wizard - Step 3 of 9
53499 Dragon Systems Audio Setup Wizard - Step 4 of 9
53500 Dragon Systems Audio Setup Wizard - Step 5 of 9
53501 Dragon Systems Audio Setup Wizard - Step 6 of 9
53502 Dragon Systems Audio Setup Wizard - Step 7 of 9
53503 Dragon Systems Audio Setup Wizard - Step 8 of 9
53504 Dragon Systems Audio Setup Wizard - Step 9 of 9
53505 Dragon Systems Audio Setup Wizard - Step 1 of 5
53506 Dragon Systems Audio Setup Wizard - Step 2 of 5
53507 Dragon Systems Audio Setup Wizard - Step 3 of 5
53508 Dragon Systems Audio Setup Wizard - Step 4 of 5
53509 Dragon Systems Audio Setup Wizard - Step 5 of 5
53510 Your computer does not have a mixer installed, which the Audio Setup wizard needs in order to control the input and output volume levels.\nYour sound system is probably not properly installed. Try re-installing it.\nYou can continue to the next steps of the Wizard, and test your speaker and microphone, but it will not be possible to adjust the volume levels.\n
53511 Your computer has more than one mixer installed. This may make it difficult for the Audio Setup wizard to control the input and output volume levels.\nYou need to configure your system to have only one mixer for one sound system. To do this in Windows 95 and Windows NT 4.0, Click Start Button, Settings, control panel. Double click multimedia. Choose the advanced tab at the top. Double click the sound system which you do not want to use. Select "Do not use".
53512 Volume Level: %-13s Sound Quality %-13s
53513 Audio Setup wizard has detected the possibility of there being more than one sound system on your system. If you experience difficulty completing the Audio Setup wizard or you cannot successfully operate your speech recognition product, click Help and refer to the topic "Extra Sound System Warning."
53514 Sound Was Detected
53515 Listening
53517 No Sound Was Detected
53518 Audio Setup wizard cannot control the volume on your computer. This may be because of an incompatability between the Audio Setup wizard and your sound system, or this may because your sound system is not working properly. Click Help for more information.
53519 Audio Setup wizard cannot control the volume. Testing can not continue. Press cancel to quit.
57344 Audio Setup Wizard
57345 Measuring sound quality...
57346 Sound quality could not be determined because not enough speech was measured. Try the test again.
57347 WARNING: Sound quality is inadequate for speech recognition. Product performance will be poor. Were you speaking? Try adjusting the position of your microphone. Click Help to find out how to improve sound quality, and then run the wizard again.
57348 WARNING: Sound quality is below average for speech recognition. Product performance will be below average. Try adjusting the position of your microphone. Click Help to find out how to improve sound quality, and then run the wizard again.
57351 Sound quality is adequate for speech recognition. Click Help for hints on how to get the best sound quality.\n \nClick Finish to save settings.
57352 Click Finish to save settings.
57353 Your system is running %s and has %d MB of physical memory (RAM) available. NaturallySpeaking requires at least %d MB of physical memory, while DragonDictate requires at least 12 MB of physical memory.
57354 Windows 95
57355 Windows NT
57356 Error
57357 Extra Sound System Warning
57358 Audio Setup wizard and NaturallySpeaking do not work with Win32s on Windows 3.1
57359 Audio Setup wizard has tested your sound system, and has found that it has a sample rate which is either much slower or much faster than it should be. Try shutting down all other applications and running the Audio Setup wizard again. If this warning appears again, there may be a problem with your sound system.
57360 Audio Setup wizard has tested your sound system, and has found that it has a high level of distortion. Try running the test again. If this warning appears again, there may be a problem with your sound system.
57361 Audio Setup wizard has tested your computer, and has found that it is slower than it should be for compatability with Dragon NaturallySpeaking. Try shutting down all other applications and running the Audio Setup wizard again. If you are using DragonDictate, please ignore this message.
57362 Warning
57600 Create a new document\nNew
57601 Open an existing document\nOpen
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the active document\nPrint
57609 Display full pages\nPrint Preview
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and put it on the Clipboard\nCopy
57635 Cut the selection and put it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57664 Display program information, version number and copyright\nAbout
57665 Quit the application; prompts to save documents\nExit
57666 Opens Help\nHelp Topics
57667 List Help topics\nHelp Topics
57668 Display instructions about how to use help\nHelp
57669 Display help for clicked on buttons, menus and windows\nHelp
57670 Display help for current task or command\nHelp
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents