home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Computer Buyer 1998 July
/
dpcb0798.bin
/
Internet
/
Claranet
/
win3
/
explorer
/
README.TXT
< prev
next >
Wrap
Text File
|
1998-04-16
|
24KB
|
595 lines
--------------------------------------------------------------------
README for Microsoft Internet Explorer 3.02a
For Microsoft Windows 3.1
May 1997
--------------------------------------------------------------------
(c) Copyright Microsoft Corporation, 1997
------------------------
HOW TO USE THIS DOCUMENT
------------------------
To view Readme.txt on screen in Notepad, maximize the Notepad window.
To print Readme.txt, open it in Notepad or another word processor,
and then use the Print command on the File menu.
--------
CONTENTS
--------
SYSTEM REQUIREMENTS
INSTALLING MICROSOFT INTERNET EXPLORER
Installing from the Internet
Upgrading over Earlier Versions
LAN Installations
Running on a Remote Installation
Before Using the Mail Client
Installing a Modem
Changing Initialization Settings for Modems
Using the Dialer
Using Third-Party Telnet Helper Applications
Installation with Existing TCP/IP Connections and ISP Accounts
Making a Backup Copy of the Software
Changing the Default Installation Directory
VM for JAVA
Memory Requirements
How to Disable VM for Java
Settings for Java
Technical support for VM
Known issues
KNOWN ISSUES AND BUGS
-------------------
SYSTEM REQUIREMENTS
-------------------
This version is intended for users of Microsoft(R) Windows(R)
3.1/3.11 and Windows for Workgroups 3.1/3.11. If you are using
Microsoft Windows 95 or Windows NT(R) 4.0, you can download
a version optimized for these platforms at:
http://www.microsoft.com/ie/default.asp
Because this version is a 16-bit program, you do not need
to have Win32s(R) installed on your computer.
This release includes Microsoft Windows 3.1 Virtual Machine (VM) for
Java(TM). It supports the same feature set available in Sun JDK 1.02.
- To run the browser only:
- 4 MB, 386 processor required; 8 MB, 386 recommended
- To run the browser and Java VM:
- 8 MB, 486 required; 12 MB, 486 recommended
- Microsoft Windows 3.1 or 3.11 or
Microsoft Windows for Workgroups 3.1 or 3.11
- A VGA monitor or better
- A mouse
- A 9600 BPS modem or a LAN connection
Note
If you are running NT 3.51, the service pack 4 is needed.
Otherwise, you will see instability in the VM.
--------------------------------------
INSTALLING MICROSOFT INTERNET EXPLORER
--------------------------------------
Installing from the Internet
----------------------------
To install Microsoft Internet Explorer from the Internet, carry out
the following procedure.
Important
For the 40-bit version of Internet Explorer, the name of the download
file is Dlful30f.exe. For the 128-bit version, you determine the file name
at the time you download it.
1. Create a temporary directory on your computer.
2. Choose to download Microsoft Internet Explorer from the Internet,
and save the download file to the temporary directory.
3. In File Manager, run the download file to extract the program files.
4. Read the instructions below for LAN installations and for installing
with existing TCP/IP connections.
5. In File Manager, run Setup.exe. Setup installs files in the
directory you specify.
Note
If you are upgrading to a newer version of Internet Explorer and
choose to install the program in a different directory from your
original version, please refer to the following section, "Upgrading
over Earlier Versions," for further instructions.
6. Run Internet Explorer.
Upgrading over Earlier Versions
When upgrading to a newer version of Internet Explorer, you can choose to
install the program into the same directory as your previous version
or establish another directory. If you choose the former, your previous
dialer settings and connection(s) will be preserved. However, if you choose
the latter, you must do the following in order to use your pre-existing
dialer settings and connection(s):
1. If you install to a new directory, but keep your existing program
group, you must change the properties of any dialer program item(s)
you previously created so that the Command Line and Working Directory
settings point to the appropriate directories. (Note that the New
Connections program item does not need to be modified.) You do this by
clicking the dialer program item, choosing Properties from the File
menu, and replacing all references to the existing directory with the
name of new directory. For example, if you install an upgrade of
Internet Explorer to a new directory named NEWEXPL, the following
change would be required:
Command Line: C:\IEXPLORE\iedial.exe C:\IEXPLORE\CON0000.CON
Working Directory: C:\IEXPLORE
Changes to:
Command Line: C:\NEWEXPL\iedial.exe C:\NEWEXPL\CON0000.CON
Working Directory: C:\NEWEXPL
2. Using File Manager, copy all files with the extension .con
from the previous directory to the new created directory.
3. If during the upgrade you choose to use a new program group,
just follow step 2 and copy the old dialer program items to the new
program group. Repeat step 1 to change the Command Line and Working
Directory settings.
LAN Installations
-----------------
If you already have access to the Internet through your LAN, you will be
able to use the Microsoft Internet Explorer to browse the Internet. (If you
are not sure whether you currently have access, consult your network
administrator.)
If you have access, your LAN administrator should provide you with proxy
servers that also can be used.
To install Internet Explorer, you need to do the following:
- Make sure you have the TCP/IP protocol installed.
- Run the installation in Custom mode, and make sure that the
check box labeled TCP/IP Stack And Dialer is not selected.
Proxy servers can also be used, provided they are CERN compliant.
To enable use of a proxy server
1. On the View menu, click Options.
2. On the Connection tab, select the check box under Proxy
Server, and then click Settings.
3. In the Proxy Settings dialog box, type the address of your
proxy server and change any other necessary settings.
Running on a Remote Installation
--------------------------------
If you will be running Internet Explorer on a diskless workstation:
1. Install Internet Explorer on the server.
2. Copy Iexplore.ini to the client Windows directory.
If you will be sharing a remote installation from a client computer
running Windows 3.1:
1. The following files must be in the client computer's
Windows\System directory:
Comctlie.dll
Vscrpt16.dll
Jscrpt16.dll
Secur16.dll
Security.dll
Msapsp16.dll
Msnssp.dll
Signin16.hlp
Msnath16.hlp
and optionally the following RealAudio files:
Ragui16.dll
Ra16.dll
Ract14_4.dll
Ra3228_8.dll
Pnloader.dll
2. The client computer must have OLE 2.03 or higher installed.
Copying the OLE files will not properly update the system.
3. The file Iexplore.ini should be on the client computer.
4. The Iexplore.ini file should be modified to accomodate
the desired location of favorites, help, cookies, and
other URLs that are specified here.
Before Using the Mail Client
----------------------------
This software contains Internet Mail for Windows 3.1. Internet Mail
enables you to send and receive mail by using the Internet.
In order to use Internet Mail, you need to have an e-mail account.
If you did not use the Internet Connection Wizard to setup Internet Mail,
you need to configure Internet Mail before using it. If it has not been
configured, Internet Mail will ask you to enter the following information:
- The names of the network servers that you use to send and
receive your mail (the name of your POP3 and SMTP servers)
- Your login name and password on the server from which you retrieve
e-mail
- Your e-mail address
If you are not ready to enter this information, contact your system
administrator or your Internet service provider for assistance.
Installing a Modem
------------------
Before setting up, please make sure that your modem is turned on and properly
connected. Setup will try to detect and configure your modem. If a modem is
detected, but the exact type is unknown, select the modem manually from the
list of supported modems.
If a modem is not detected or you select the check box labeled Don't
Detect My Modem, you can select the modem manually. However, the default
maximum speed will be 9600 baud. Therefore, you should manually select a
speed that matches your modem's capabilities in order to optimize the
performance of the modem.
Changing Initialization Settings for Modems
-----------------------------------------------------
If you are using an older phone system or hardware, or if you are installing
a "generic" modem, the existing initialization settings for the modem might
not be sufficient. If you have problems with the modem, you may need to
modify the Modems2.ini file in order to change the initialization settings.
Use Notepad or another text editor to open the file, and then, in the modems
section, locate the line for the modem, and modify the INIT line as needed.
Using the Dialer
----------------
This release of Internet Explorer also supports dialer scripts. IEscript.exe
is located in the directory where you installed this Internet Explorer. The
program allows you to associate a script with a connection. To start the
program, choose Run from the File menu in Program Manager.
In order to use the dialer with a PBX that does not have a dial tone, you
need to modify the DialString in the "Dial-In Configuration" section of the
Shivappp.ini file in order to dial. For example, the X3 command would be
inserted between the "AT" and "D" entries as follows:
[Dial-In Configuration]
DialString=ATX3D
Note that adding the X3 command affects all locations and only functions
properly with Hayes-compatible modems.
To access an outside line, you might need to add a pause character (either a
W or a comma) after the outside access number, so that there is a pause
before the outside number is dialed. To specify this setting, click the My
Locations tab, and then in the box labeled To Access An Outside Line, First
Dial, type the outside line access number followed by a W or a comma. For
example, if the number required to access an outside line is "9," you would
type the following in the box:
9W
- or -
9,
If you Have Other Networking or Internet Dial-up Software
on Your System (Multiple Winsock.dll's)
If you've installed the Dialer program provided with Internet Explorer and
there is other TCP dialer or networking software (Winsock.dll) on your
computer, Internet Explorer gives preference to those other versions of
Winsock. This is a change in behavior from previous versions of Internet
Explorer.
If you do not need to use the other versions of Winsock.dll, you must
remove or rename all files of that name EXCEPT for the one in the Internet
Explorer installation directory, in order for the Dialer to work.
If you do not want to remove or disable your other networking software,
but want to use the Dialer, start the Dialer before starting the Internet
Explorer browser in order to load the appropriate version of Winsock. In
this case, to use the other software, you must close the Dialer, and then
start the browser.
Using Third-Party Telnet Helper Applications
--------------------------------------------
To configure Internet Explorer to use a Telnet helper application, open
Iexplore.ini and locate the [Helpers] section. Remove the semicolon (;) from
in front of the telnet= line, and type the path to the telnet application.
For example:
[helpers]
telnet=c:\windows\telnet.exe %s
Installation with Existing TCP/IP Connections and ISP Accounts
--------------------------------------------------------------
Microsoft Internet Explorer has been installed and tested with several of the
most popular Internet access products available today. If it is configured
properly, you should be able to use the TCP/IP protocol and dialer (via
Winsock.dll) provided with these products to connect with your Internet
service provider (ISP). It is not necessary to install the Dialer and
TCP/IP stack that are provided with Internet Explorer.
In general, all that is required is that you configure the PATH command in
your Autoexec.bat file so that Microsoft Internet Explorer can find the
Winsock.dll file you are using to connect to the Internet. For example, if
your Winsock.dll file is in the directory C:\Connect, add a line directly
under your current PATH command that reads:
PATH=%PATH%;C:\CONNECT
If you have multiple Winsock.dll files, please make sure that the Winsock
file you choose to use comes first in the PATH command or is located in the
directory where your browser files reside. See also "If you Have Other
Networking or Internet Dial-up Software on Your System (Multiple
Winsock.dll's)" earlier in this document.
Following are procedures for installing Microsoft Internet Explorer over some
common Internet access products. Other packages available include FTP
Software, Network TeleSystems, and shareware from Trumpet Software
(http://www.trumpet.com.au/wsk/winsock.htm).
Internet Chameleon 4.5
----------------------
1. Install Microsoft Internet Explorer to the suggested default
directory (C:\Iexplore).
2. Make sure that the Internet Chameleon directory is in your path.
If it is not, add it to the PATH statement in your Autoexec.bat
file, and then restart your computer.
3. Run the Internet Chameleon dialer program (from the Custom icon).
4. Select the line corresponding to your current Internet service
provider, and make sure that the Dial On Demand command on the
Setup menu has a check mark by it. This makes the dialer
program run when Internet Explorer tries to connect to the Internet.
5. Start Internet Explorer by double-clicking the Internet Explorer icon
in the Microsoft Internet Explorer group in Program Manager.
If you have configured the Chameleon dialer to dial on demand, an
Internet connection is made when you first enter an Internet address in
Internet Explorer.
If you have not configured the Chameleon dialer to dial on demand, you need
to start that program before you start Internet Explorer.
Netscape Navigator 1.2 Personal Edition
---------------------------------------
1. Install Microsoft Internet Explorer to the directory that contains
your Netscape Navigator files. For example, if you installed the
Netscape browser in the default directory (C:\Netscape), place the
Microsoft Internet Explorer files in the same location.
2. Run Internet Explorer.
Other Internet Dialer Packages
------------------------------
1. Using the Custom setup option, install Microsoft Internet Explorer
to the suggested default directory without the TCP/IP stack and dialer.
2. Make sure that the Internet dialer directory is in your path.
If it is not, add it to the PATH statement in your Autoexec.bat
file, and then restart your computer.
3. Run your existing Internet dialer program.
4. Choose to enable dial on demand (if your dialer supports this option).
This makes the dialer program run when Internet Explorer tries
to connect to the Internet.
5. Start Internet Explorer by double-clicking the Internet Explorer icon
in the Microsoft Internet Explorer group in Program Manager.
If you have configured the dialer to dial on demand, an Internet connection
is made when you first enter an Internet address in Internet Explorer.
If you have not configured the dialer to dial on demand, you need to start
that program before you start Internet Explorer.
Making a Backup Copy of the Software
------------------------------------
1. Make sure that you have three disks (3.5" disks with 1.44 MB capacity).
2. After you have downloaded the software and have run the download file
(see "Installing from the Internet" section earlier in this file) your
temporary directory contains all the files that you need to make disks.
3. Copy the file Iew31_4.cab on your disk number 4.
4. Copy the file Iew31_3.cab on your disk number 3.
5. Copy the file Iew31_2.cab on your disk number 2.
6. Copy the following files on your disk number 1.
Files.inf
Readme.txt
Iew31_1.cab
Setup.exe
Install.lst
License.txt
Install.bin
Setup.ini
Changing the Default Installation Directory
-------------------------------------------
Setup enables you to change the name of the installation directory for
Microsoft Internet Explorer. The default directory name is C:\IExplore.
If you choose to install Microsoft Internet Explorer in a different
directory, please make sure the new directory name does not contain
any special extended or DBCS (Double-Byte Character Set) characters.
Only characters in the lower ASCII range can be used for the name of
the installation directory.
------------
VM FOR JAVA
------------
This release includes Microsoft Windows 3.1 Virtual Machine (VM)
for Java(TM)*. It supports the same feature set available in Sun
JDK 1.02. At least 8 MB is required to run Java.
Note
If you are running NT 3.51, the service pack 4 is needed.
Otherwise, you will see instability in the VM.
How to Disable the VM for Java
------------------------------
To disable Java applets in Internet Explorer because of security or
other concerns, carry out the following steps:
1. Click the View menu, and then click Options.
2. Click the Security tab.
3. Clear the Enable Java Programs checkbox.
Settings for Java
------------------
The settings for VM for Java are in the JavaVM section in the
Iexplore.ini file, which is located in the Windows directory. You
can modify the following settings by using a text editor, such as
Notepad, to open the file.
ClassPath: Lists which directories to search for classes.
If you want to run Java applets on your local
computer, you can put all the class files into
an uncompressed Zip file and add the full path
of the Zip file to your ClassPath string.
For example:
ClassPath=c:\iedir\classes.zip;c:\myclass\myclass.zip
DefaultOptions: The options for Java VM
mx<number> Sets the maximum Java heap size.
ms<number> Sets the minimum Java heap size.
ss<number> Sets the C stack size of the VM.
oss<number> Sets the Java stack size of the VM.
verify Verifies all classes when read in.
verifyremote Verifies classes reading in over the network
(default).
noverify Does not verify any class.
Typically, you do not need to change the default options settings.
However, if you have problems running large and complicated applets
(which include many classes and need more heap space), try increasing
the numbers for the ms and mx settings.
By default, ms is set as 600KB and mx is set as 2048KB. You can increase
the number of the ms option to 800KB or so; or, increase mx to 3096KB
or so. However, ms should not be larger than mx. You can try this when
you see an Out Of Memory exception on the browser status bar.
*Java is a trademark of Sun Microsystems, Inc.
Technical Support for VM
------------------------
VM for Java is supported through the Microsoft News Server. The
following newsgroup is dedicated to the discussion of VM for Java and
provides a great deal of support:
news://msnews.microsoft.com/microsoft.public.java.win16.all
Note
For general discussion of Internet Explorer, use this newsgroup:
news://msnews.microsoft.com/microsoft.public.internetexplorer.win3.1x
To setup Internet Explorer to use this news server, follow these steps:
1. In Internet Explorer, click the View menu, and then click Options.
2. On the Programs tab, click the News button.
3. In the News Server Address box, type:
MSNEWS.MICROSOFT.COM
Known Issues with Java on Windows 3.1
-------------------------------------
Java is a 32-bit multithreaded technology that uses case-sensitive
long file names and UNICODE. Windows 3.1 does not provide these services,
which means they have to be emulated in the virtual machine. Further,
Windows 3.1 machines typically have slower processors and less memory
than Windows 95 or Windows NT, so fewer resources are available to
applications. As a result, it is not possible to provide the same
Java experience on Windows 3.1 as on Windows 95 or Windows NT. Two of
the symptoms you will see when you use Internet Explorer with Java
applets are as follows:
-- OutOfMemory exception on browser status bar. This message
indicates an out-of-system-memory error. The Java virtual
machine allocates limited memory for Java run time. If the
Java applet is too big, it will use all the memory available
on Windows 3.1.
-- Random GPFs. This may happen when your system runs out of USER
or GDI resources. The USER and GDI resources are limited on
Windows 3.1 and they are shared by all programs. You may see
GPFs here and there in different applications when this happens.
-- For non-Latin1 versions of Windows, this release of Internet Explorer
does not support loading Java applets in directories named with
extended characters. It will be supported in the next release.
---------------------
KNOWN ISSUES AND BUGS
---------------------
* No inline video.
* No Internet shortcuts.
* You cannot open another instance of Internet Explorer by double-clicking
an .htm file in File Manager or double-clicking the Internet Explorer icon
in Program Manager. To open a new instance of Internet Explorer, choose
New Window from the File menu.
* If you have voice messages waiting on your phone line (rapid beeps), our
Dialer fails to dial out on the line. This can be remedied (for Hayes-
compatible modems only) if, in the file Modems2.ini, at the end of the line
for the InitString setting, you set "blind dialing" by typing:
S6=5
* Internet Explorer might have difficulty loading a very large number of
newsgroups (>16000). If your news server has a large number of newsgroups,
you should use a dedicated newsreader to browse the groups.
* After upgrading to version 3.02a, if you run an earlier version, you might
get a dialog box stating "Could not :Load Entry Point in Security Protocol
Module: Proxy_Basic=Proxy_basic_Load,basic.dll." Just click OK and
continue or copy the Basic.dll from the 3.02a installation over the
Basic.dll in the previous installation.
* You might experience problems running some plug-ins. We are working with
several vendors on these issues.
* Pressing the TAB key does not select the Address bar as in previous
versions.
* If you are running Windows NT 3.51, the background of the Font Preview
box (on the Font tab in the Internet Mail Options dialog box) will
sometimes change colors. In some cases, this color may be very dark,
making it impossible to see the font being previewed. It is, however,
still possible to change the font. Restarting your computer a few times
may solve the color problem.