home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Computer Buyer 1996 May
/
buyer-0596.iso
/
internet
/
encode
/
esscode.txt
< prev
next >
Wrap
Text File
|
1995-07-02
|
45KB
|
1,026 lines
--------------------------------------------------------------------------
ESS-Code 6.6 \ \ \ \ \ \ \ \ \
Electric Storm Software / / / / / / / / /
Copyright 1993, 1994, 1995, Michel Forget / / / / / / / / /
--------------------------------------------------------------------------
========
CONTENTS
========
1. Introduction
2. Registration
a) Registration Information
b) Registration Form
c) United Kingdom Registration Form
3. ESS-Code Version Information
a) The Windows Version
b) The WindowsNT/Windows 95 Version
c) The DOS Version
d) The Atari Version
4. Distribution
5. Disclaimer
6. Contacting Electric Storm Software
7. Using ESS-Code
a. System Requirements
b. The Windows Version (16-BIT & 32-BIT Versions)
I) Introduction
II) The Menu
III) The Servers
c. The DOS Version
I) Introduction
II) Common Parameters
III) Unique Parameters
i) MIME.EXE
ii) UNMIME.EXE
iii) SHIP.EXE
iv) UUE.EXE
IV) Help
8. Acknowledgements
9. Third Party Copyrights
=============================================================================
1. INTRODUCTION
=============================================================================
ESS-Code is an application designed to allow computer users to exchange
binary files across computer networks that do not support the transmission
of binary information. This task is accomplished by converting the binary
file to an ASCII file, then converting the ASCII file back to its original
state after transmission.
There are four popular methods of conversion, each of which is named
after the part of the process that performs the conversion; UUE, MIME, BTOA,
and SHIP. Since each of these conversion methods is an accepted standard,
there are a wide variety of encoding/decoding utilities available for every
major computer platform, including UNIX, Macintosh, Amiga, Atari, and many
more.
Why should you use ESS-Code instead of one of the many other utilities
currently available? There are many reasons:
1) SPEED - ESS-Code is much faster than other coding
programs that I have tested. In some cases, the
difference in speed is as much as 40%! ESS-Code
was tested against several major Shareware
applications, and not one of them was faster.
2) COMPATIBILITY - There are versions of ESS-Code available for DOS,
Windows, WindowsNT, and Windows95. The
conversion methods used by ESS-Code are standard,
meaning that you can use other conversion
programs on other platforms (UNIX, Amiga, Atari,
& Macintosh) to process files that have been
converted with ESS-Code.
3) OPTIONS - ESS-Code was written with the needs of the user
in mind. There are a host of user-configurable
options that can be set to affect how output is
generated, how ESS-Code behaves, and even how
ESS-Code looks.
4) FLEXIBILITY - ESS-Code supports UUE, BTOA, SHIP, MIME, File
Splitting, File Joining, and more. All of your
file conversion needs are handled by one
application.
5) BINARY NEWSGROUPS - Many USENET discussion groups (newsgroups) --
those with the word "binaries" in the name --
encode messages so that they can be distributed
to the public.
6) ONLINE SERVICES - Do you have a Genie, CompuServe, or AOL account?
Many online services do not provide a way to
send a file to another user in electronic mail,
or charge for this service. If this is the case,
the file in question can be processed with
ESS-Code.
[The following two considerations only apply to the Windows version.]
7) APPEARANCE - ESS-Code is a Windows application, which means that
it makes extensive use of menus, dialog boxes, and
graphical output. You are not required to remember
any command line parameters, or type needlessly.
Since ESS-Code is a Windows application, you can
also access other programs while ESS-Code is
performing a conversion, or perform more than one
conversion at once.
8) HELP - As you would expect of any application written for
the Windows environment, ESS-Code has extensive
online help. You can read the documentation
online, search for keywords, and find information
quickly when needed.
=============================================================================
2. Registration
=============================================================================
-------------------------------
- a) Registration Information -
-------------------------------
OR: Is this program worth $15.00 to me?
If you believe that ESS-Code is a quality product and would like to
receive the registered version of the software, please send $15 (US/CDN)
to:
Michel Forget (RE: PC)
12209 Dovercourt Avenue
Edmonton, Alberta
CANADA
T5L 4E1
If you send a cheque to the address listed above, please make it payable
to Michel Forget.
If you do not live in North America (and you are writing to this address
instead of the address for users in the United Kingdom), please send an
international money order or the equivalent of $15 in your own currency.
Please do not send a personal cheque unless you live in North America.
For your convenience, we have included a registration form which can be
printed for easier (and very likely quicker) service.
If you live in the United Kingdom, you can send your registration (10 UKP)
to:
ESS-PC (c/o Denesh Bhabuta)
203 Parr Lane
Unsworth
Bury
Lancashire
BL9 8JW
If you send a cheque to the address listed above, please make it payable
to Denesh Bhabuta.
For your convenience, we have included a United Kingdom registration
form for those who live in the United Kingdom.
------------------------
- b) Registration Form -
------------------------
You do not need to print this form to register. It is provided for
your convenience only. If you do not have a printer, or simply do not wish
to print this form, simply send your name, address, and registration fee to
the address listed below.
TO: Michel Forget (RE: PC)
12209 Dovercourt Avenue
Edmonton, Alberta
CANADA
T5L 4E1
Dear Michel,
I am sending you $15.00 (US/CDN) as my registration fee for ESS-Code.
Please send me a key that I can use to unlock all current and future versions
of ESS-Code.
Name: ____________________________________
Address: ____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
If you supply an Internet electronic mail address, your key will me sent to
you by electronic mail (in addition to being sent through normal paper-mail.
E-Mail: [Internet]
______________________________________________________
[Other]
______________________________________________________
[________] Please send a note to my Internet electronic mail address
when new versions of ESS-Code are released.
Please feel free to use the space provided below to record your comments,
suggestions, or bug reports (if any):
(insert as much space as you need before printing - we love feedback)
---------------------------------------
- c) United Kingdom Registration Form -
---------------------------------------
You do not need to print this form to register. It is provided for your
convenience only. If you do not have a printer, or simply do not wish to
print this form, simply send your name, address, and registration fee to the
address listed below.
TO: ESS-PC (c/o Denesh Bhabuta)
203 Parr Lane
Unsworth
Bury
Lancashire
BL9 8JW
Dear Denesh,
I am sending you 10 UKP as my registration fee for ESS-Code. Please
send me a key that I can use to unlock all current and future versions of
ESS-Code.
Name: ____________________________________
Address: ____________________________________
____________________________________
____________________________________
____________________________________
____________________________________
If you supply an Internet electronic mail address, your key will me sent
to you by electronic mail (in addition to being sent through normal
paper-mail.
E-Mail: [Internet]
______________________________________________________
[Other]
______________________________________________________
[________] Please send a note to my Internet electronic mail address
when new versions of ESS-Code are released.
Please feel free to use the space provided below to record your
comments, suggestions, or bug reports (if any): Your comments will be
forwarded to Electric Storm Software.
(insert as much space as you need before printing - we love feedback)
=============================================================================
3. ESS-Code Version Information
=============================================================================
There are several distinct versions of ESS-Code available, each serving
a different operating environment but sharing a common version number. The
archive you received this manual with will contain only one version of
ESS-Code. If you should desire another of the available versions of
ESS-Code, it should be available where you found this archive under one of
the following filenames:
THE WINDOWS VERSION ECD66WIN.ZIP
THE WINDOWS 95 / WINDOWS NT VERSION ECD66W95.ZIP
THE DOS VERSION ECD66DOS.ZIP
THE ATARI VERSION ECD64ATR.ZIP
ESSCD64.ZIP
The Windows version of ESS-Code can be used with WindowsNT and/or
Windows95. The DOS version, of course, can be used with any Windows
platform. If you are using OS/2, you may use either the DOS or Windows
versions of ESS-Code.
=============================================================================
4. Distribution
=============================================================================
The unregistered version of ESS-Code may be distributed with the
following limitations:
GENERAL
ESS-Code may be distributed free of charge; there can be no fee
charged for the distribution of ESS-Code other than reasonable media
charges. ESS-Code may only be distributed in its entirety -- the
archive format may be changed, but all of the files in the original
archive must be included in the new archive.
MAGAZINES
ESS-Code may be included on disks or CD-ROMs included with (or
sold by) magazines without permission, providing that a courtesy
copy of the magazine (and media) is sent to Electric Storm Software
and all other rules of distribution are adhered to.
CD-ROM SOFTWARE COLLECTIONS
ESS-Code may be included on CD-ROM collections, providing that
all rules of distribution are adhered to. A courtesy copy of the
media would but sincerely appreciated, but is not manditory.
The limitations specified in this section are not designed to interfere
with you; they are designed to protect the interests of Electric Storm
Software. If there are any questions about these limitations, please do not
hesitate to contact Electric Storm Software.
=============================================================================
5. Disclaimer
=============================================================================
ESS-CODE ("THE SOFTWARE") DOES NOT COME WITH ANY WARRANTY, EXPRESS OR
IMPLIED. IF YOU MAKE USE OF THE SOFTWARE, PLEASE BE AWARE THAT YOU DO SO AT
YOUR OWN RISK. NEITHER THE AUTHOR OF THE SOFTWARE (MICHEL FORGET) NOR ANY
OTHER PARTY WILL ACCEPT RESPONSIBILITY FOR ANY DATA LOSS, EQUIPMENT DAMAGE,
OR OTHER UNFORESEEN CONSEQUENCES OR DAMAGES THAT ARISE AS A RESULT OF THE
USE OR MISUSE OF THE SOFTWARE.
=============================================================================
6. Contacting Electric Storm Software
=============================================================================
Programming: Michel Forget
Design Testing: Mike Bublitz
If you would like to contact Electric Storm Software, please send an
electronic mail message to mforget@worldgate.com or mbublitz@worldgate.com
-- your message will be answered promptly. If you would like to contact
Electric Storm Software in writing, either for the purposes of registration
or to offer comments or suggestions, please write to:
Michel Forget (RE: PC)
12209 Dovercourt Avenue
Edmonton, Alberta
CANADA
T5L 4E1
=============================================================================
7. Using ESS-Code
=============================================================================
--------------------------
- a. System Requirements -
--------------------------
ESS-Code is not an application that will consume the resources of your
system. If you would like to use ESS-Code on your system, you should have:
DOS Version
DOS >= 3.3
Windows 3.1/3.11 16-BIT Version
DOS >= 3.3
Windows >= 3.1
VGA (>=16 Colours)
Windows95/WindowsNT 32-BIT Version
80386 Processor
Windows 95/WindowsNT
VGA (16 Colours)
-----------------------------------------------------
- b. The Windows Version (16-BIT & 32-BIT Versions) -
-----------------------------------------------------
INTRODUCTION
The purpose of this section of the manual is to describe what each of
the features of ESS-Code does, and how to use them.
ESS-Code is an application designed to allow computer users to exchange
binary files across computer networks that do not support the transmission
of binary information. This task is accomplished by converting the binary
file to an ASCII file, then converting the ASCII file back to its original
state after transmission.
There are four popular methods of conversion, each of which is named
after the part of the process that performs the conversion; UUE, MIME, BTOA,
and SHIP. Since each of these conversion methods is an accepted standard,
there are a wide variety of encoding/decoding utilities available for every
major computer platform, including UNIX, Macintosh, Amiga, Atari, and many
more.
The ESS-Code "client" (the shell that you work with) is a Windows
application; this means that you communicate with the client using menus,
dialog boxes, message boxes, and the mouse. The results of your actions
are shown in the application window in a summarized graphical format.
DRAG & DROP SUPPORT
ESS-Code, like many other applications available, allows you to drag
a file from the program manager (or explorer) to the ESS-Code application
window to perform an encoding/decoding operation.
When the file is dropped on the ESS-Code application window, a dialog
box will appear asking what should be done with the file. After selecting
the appropriate action, ESS-Code will perform the action (asking for extra
information if necessary).
THE MENU
The ESS-Code user interface has four menus. Each menu contains commands
that are related to one another.
FILE
The file menu allows you to perform various operations on files,
such as encoding, decoding, splitting, and joining.
UUEncode File...
----------------
This command will allow you to convert a file of your choosing
from binary to ASCII using the Dumas UUEncode file conversion method.
If segmentation is enabled, the resulting output files will have
extensions of ".UAA", ".UAB", ".UAC", and so on. If segmentation is
not enabled, the resulting output file will have an extension of
".UUE".
This method of file conversion is very fast, but it is also very
inefficient. After being converted, files are typically 20% larger
than their binary counterparts. The most attractive feature of this
file conversion method is that it is supported by virtually every
computer platform in existence.
UUDecode File...
----------------
This command will allow you to return a file converted with the
Dumas UUEncode file conversion method to its original binary state.
Files that have been converted with the Dumas UUEncode file
conversion method have extensions of ".UUE", ".UAA", ".UAB", ".UAC",
[...], ".UBA", ".UBB", ".UBC", and so forth.
When decoding a segmented file using this file conversion method,
you do not need to specify each of the segments.
MIME-Encode File...
-------------------
This command will allow you convert a file of your choosing from
binary to ASCII using the MIME file conversion method.
If segmentation is enabled, the resulting output files will have
extensions of ".01", ".02", ".03", and so forth. If segmentation is
not enabled, the resulting output file will have an extension of ".M".
This file conversion method, which is the newest of the file
conversion methods to be developed, is rapidly gaining in popularity.
It is fast, efficient, and flexible. If you know that the person or
machine receiving your data can process MIME-Encoded files, this is
the best file conversion method to use.
MIME-Decode File...
-------------------
This command will allow you to return a file converted with the
MIME file conversion method to its original binary state.
Files that have been converted with the MIME file conversion
method have extensions of ".M", ".01", ".02", ".03", and so forth.
When decoding a segmented file using this file conversion method,
you do not need to specify each segment of the file to be decoded
(though you can do so if you wish). Only the first segment must be
specified.
SHIP-Encode File...
-------------------
This command will allow you convert a file of your choosing from
binary to ASCII using the SHIP file conversion method.
To retain compatibility with the UNIX implementation of SHIP, the
output of this encoding method is always a series of files named
"PART0001", "PART0002", and so forth. While not a desirable
situation, this is an unfortunate necessity.
This file conversion method, though available, should not be used
unless there is no other option available. MIME-Encoding, which is
nearly as efficient, is much more flexible than SHIP-Encoding.
SHIP-Decode File...
-------------------
This command will allow you to return a file converted with the
SHIP file conversion method to its original binary state.
Files that have been converted with the SHIP file conversion
method have names such as "PART0001", "PART0002", "PART0003", and so
forth.
When decoding a segmented file using this file conversion method,
you do not need to specify each segment to be decoded (though you can
do so if you wish). Only the first segment must be specified.
BTOA-Encode File...
-------------------
This command will allow you convert a file of your choosing from
binary to ASCII using the BTOA file conversion method.
To retain compatibility with the UNIX implementation of BTOA, the
output of this encoding method cannot be segmented. If you need to
segment the output, you can use the "Split File..." command to do so.
If the resulting file is to be rebuilt on a UNIX system, you will need
to use the "cat" command in the following fashion (after removing
network message headers):
/usr/mforget/> cat file.1 file.2 file.3 file.4 file.5 >the.whole.file
/usr/mforget/> atob the.whole.file output
BTOA-Decode File...
-------------------
This command will allow you to return a file converted with the
BTOA file conversion method to its original binary state.
Files that have been converted with the BTOA file conversion
method have extensions of ".B2A".
Split File...
-------------
This command will allow you to split a file into segments so that
it may be written to disk for transportation or so that it may be
transmitted across a network. It is important to recognize that the
file (once split using this method) will not be able to be processed
by any conversion method until it is once again rebuilt. If ESS-Code
is not available for the platform on which the file will be rebuilt,
there are many other utilities available that can perform this task
(or it could be performed manually using a text editor).
Join File...
------------
This command will allow you to rejoin the parts of a file that
has been split by ESS-Code. You do not need to specify the name of
each segment to join. Instead, you are only required to specify
the name of the first segment (and ESS-Code will determine the
other segment names).
Apply Filter
------------
This command will allow you to repair UUEncoded files that have
been distributed in a corrupted (non-standard) format. This is most
often the case when files are distributed through USENET discussion
groups or when files are distributed by ftp-mail software.
Files are repaired by using a special template called a filter.
The filter consists of a data start sequence, a data end sequence,
and two instance counters.
Each filter consists of four individual elements; a data start
sequence, a data end sequence, and two instance counters. The data
start sequence is a unique set of characters that appear on the line
immediately before the encoded data begins. The data end sequence
is a unique set of characters that appear on the line immediately
after the encoded data (for the segment) is complete. The two
instance counters determine how many times the sequence in question
(start or end) should be located before ESS-Code starts or stops
recording data.
There are several filters included with ESS-Code, but the filter
you need may not be available. If this is the case, you can create
your own filter (and save it if you expect to need it more than
once).
Once a file has been passed through a filter, the output will
consist of one non-segmented, standard, UUEncoded file.
Reset LOG File
--------------
This command is only available in the 32-BIT version of
ESS-Code.
This command will allow you to erase the file that ESS-Code uses
to record information about the actions you perform while using
ESS-Code. This file is required so that you have a way of tracking
where encoded/decoded files have been placed, and what options were
used for each encoding/decoding operation. It also provides you with
a cumulative written record of what you have done with ESS-Code. If
you find that the file is growing too large, simply select this
command to erase it.
Exit
----
This command will allow you to exit ESS-Code. You will not be
asked for confirmation unless your options have changed and the
AutoSave Options feature is disabled.
SEGMENTATION
When ESS-Code is processing a file, it can split the output file
into segments so that it can be placed on floppy disks for
transportation or transmitted over networks that cannot accommodate
large messages. The segmentation menu allows you to determine the size
of the segments that ESS-Code will create.
Preset Segment Size
-------------------
The segment sizes that are shown in this submenu are typical
segment sizes that are commonly used.
User Defined Size
-----------------
If none of the preset segment sizes match your needs, you can
specify a segment size of your own by selecting this menu entry.
No Segmentation
---------------
If you do not need segmentation, select this menu entry to
disable it.
OPTIONS
The options menu allows you to control how ESS-Code encodes and
decodes files. You can also significantly alter the look-and-feel of
the application using the commands found in this menu.
UUEncode
--------
Full Path Specification This command forces the inclusion of the
full pathname of the file being encoded in
the encoded file. Normally, UUEncoded
files only contain the filename and
extension of the file being encoded.
Generate Table This command forces the generation of a
table of characters to compensate for
corruption by ill-behaved network
mailers. This table, while not usually
required, can be useful in some
situations.
SHIP-Encode
-----------
Fast Mode Selecting this menu entry will force the
SHIP file conversion method to use a
slightly less efficient (but slightly
faster) method of encoding.
MIME-Encode
-----------
Subject If you select this menu entry, the MIME
file conversion method will prompt you for
a message subject to apply to the outgoing
(encoded) data.
Description If you select this menu entry, the MIME
file conversion method will prompt you
for the name of a file containing a
description of the outgoing (encoded) data.
Specify Content Type Selecting this menu entry will cause the
MIME file conversion method to prompt you
for a content-type to apply to the outgoing
(encoded) data. The content-type must be a
subtype of application, audio, image, or
video.
MIME-Decode / SHIP-Decode
-------------------------
Quick Find If you select this menu entry, ESS-Code
will only require you to specify the name
of the first segment of a file that was
encoded with the MIME/SHIP file conversion
methods. ESS-Code will attempt to
determine the names of all subsequent
segments. This option, which is enabled
by default, should only be disabled if the
file you are decoding does not conform to
the naming standard used by ESS-Code, or
if the segments of the file you are
decoding reside in multiple directories
on your system.
Client Execution Mode
---------------------
Hidden If you select this menu entry, ESS-Code
will hide servers when they are launched
so that they have no visible output and do
not appear on your monitor.
Minimized If you select this menu entry, ESS-Code
will minimize servers when they are
launched so that they have no visible
output, but appear as an icon (which can
be opened should the need arise).
Background Window If you select this menu entry, ESS-Code
will display the output of servers in a
background window when they are launched.
This leaves you free to continue working
with ESS-Code.
Foreground Window Selecting this menu entry will cause
ESS-Code to display the output of servers
in a foreground window when they are
launched. This allows you to see the
contents of the entire window. If you
wish to continue working with ESS-Code
while the server is operating, simply
click on the main application window of
ESS-Code.
Quick Termination Selecting this menu entry will cause
ESS-Code to remove server windows (if
visible) immediately after the server has
finished the task it was assigned. While
this prevents you from viewing the output
of the encoding/decoding operation, it
makes system resources available to the
system that would otherwise be unavailable
until the server window was closed
manually.
UNIX Line Termination
---------------------
If you select this menu entry, each line of encoded output will
end with a UNIX line-end character instead of a DOS line-end
character. This prevents "^M" from appearing after every line when
the encoded file is processed by a UNIX network mailer.
Overwrite Confirmation
----------------------
Selecting this menu entry will cause ESS-Code to ask for
confirmation before it overwrites any existing files during an
encoding, decoding, file splitting, of file joining operation.
AutoSave Options
----------------
If you select this menu entry, ESS-Code will automatically save
your options before you exit if they have been changed.
Save Options
------------
Selecting this menu entry will cause your options to be saved
immediately.
Save Options As...
------------------
Selecting this menu entry will allow you to save your options
using a filename (and location) of your choosing.
Load Options...
---------------
Selecting this menu entry will allow you to load a previously
saved set of options.
HELP
The help menu allows you to search for help on a specific topic,
use the online manual, learn how to use the help system, and much more.
Contents
--------
If you select this menu entry, you will be shown the contents of
the online manual.
Search...
---------
This menu entry will allow you to search for help within the
online manual on a topic of your choosing.
Index
-----
If you select this menu entry, you will be shown the index of the
online manual.
Using Help
----------
If you do not know how to use the help system, select this menu
entry to learn more about it.
About ESS-Code...
-----------------
This menu entry will allow you to view general information about
ESS-Code, including copyright and shareware information.
----------------------
- c. The DOS Version -
----------------------
INTRODUCTION
The purpose of this section of the manual is to describe what each of
the features of ESS-Code does, and how to use them.
ESS-Code is an application designed to allow computer users to exchange
binary files across computer networks that do not support the transmission
of binary information. This task is accomplished by converting the binary
file to an ASCII file, then converting the ASCII file back to its original
state after transmission.
There are four popular methods of conversion, each of which is named
after the part of the process that performs the conversion; UUE, MIME, BTOA,
and SHIP. Since each of these conversion methods is an accepted standard,
there are a wide variety of encoding/decoding utilities available for every
major computer platform, including UNIX, Macintosh, Amiga, Atari, and many
more. Each of the applications that form the backbone of ESS-Code has been
ported directly from their UNIX counterparts, with the exception of MIME.EXE
which is based entirely on the DOS version of MPACK.EXE (with minor cosmetic
changes and several additional features which make it easier to use). In
all situations, compatibility with the UNIX implementation takes
precedence over any other consideration. This can lead to some strange
behaviour (such as the file naming method used by SHIP.EXE) but is much
preferable to having a program that cannot communicate with the software
on which it was based.
Unlike the Windows version, there is no "client" aspect to the DOS
version of ESS-Code. Instead, you communicate directly with DOS
implementations of the various file conversion methods offered by ESS-Code.
This form of interaction is most often used by bulletin board systems,
electronic mail gateways, and other "batch" applications (since no human
interaction is required). This method of interaction is also ideally
suited to people who like prefer DOS to Windows.
If you do not know what command to use on the command line for an
ESS-Code application, simply type the name of that application and
you will be shown a "usage" page. If you want more information on a
command than is shown on the usage page, or more information than is
shown in this section of the manual, please read the section of the
manual about the Windows version of ESS-Code. It explains every option
in detail.
COMMON PARAMETERS
ESS-Code is a complex set of applications that encompasses many
different file conversion methods, but every effort has been made to ensure
that each of the applications that form ESS-Code look and feel the same as
the others. In addition to this, many of the applications share the same
parameters. This section of the manual discusses those parameters which
are common to all of the applications that for ESS-Code.
The following command applies to all ESS-Code applications:
Name Brief Explanation
---- -----------------
-c This parameter enables overwrite confirmation.
You will be prompted before any file are
destroyed by ESS-Code, and given the chance
not to continue.
The following command applies to all ESS-Code encoding applications:
Name Brief Explanation
---- -----------------
-u This parameter enables UNIX Line Termination.
Instead of ending each line of encoded ASCII
data in a file with the standard MS-DOS line-end
character, the UNIX line-end character will be
used.
The following command applies to all ESS-Code encoding applications
that are capable of producing segmented output, except MIME.EXE:
Name Brief Explanation
---- -----------------
-s<size> This command will enable segmented output.
UNIQUE PARAMETERS
Several of the applications that form ESS-Code have unique capabilities.
This section of the manual describes what those capabilities are:
MIME.EXE:
Name Brief Explanation
---- -----------------
-s <subject> This applies a subject to the outgoing (encoded)
message. If the subject contains spaces, quote
it.
Example: -s "This is a test."
-d <description file> This applies a description to the outgoing
(encoded) message. The description should be
contained in an ASCII file, and should be no
more than eighty characters wide.
-m <characters> This parameter enables segmentation, as
described in the preceding section.
-t <content-type> This command allows you to manually specify
the content-type of the outgoing (encoded)
message.
UNMIME.EXE
Name Brief Explanation
---- -----------------
-q This command will prevent MIME.EXE from
displaying as much output as it normally
does.
-d <directory> The UNMIME.EXE application normally places
output in the current directory. If you do
not want this to happen, you can specify an
alternate directory with this command.
Example: -d D:\USER\MFORGET
SHIP.EXE
Name Brief Explanation
---- -----------------
-f This command enables "fast" mode. This mode is
slightly faster, but slightly less efficient,
than the normal file conversion method used.
UUE.EXE
Name Brief Explanation
---- -----------------
-f This command will cause ESS-Code to record the
full pathname of the file being encoded within
the encoded file, instead of simply recording
the filename.
-t This command will cause ESS-Code to generate
a table of ASCII characters, which helps prevent
ill-behaved network mail software from corrupting
the encoded data during transmission.
=============================================================================
8. Acknowledgements
=============================================================================
ESS-Code is only possible because of the following people:
Paul Rutter & Joe Orost
John G. Myers
Mark Adler
Mike Bublitz
Denesh Bhabuta
Erlend Nagel
RSA Data Security, Inc.
Carnegie Mellon University
Bell Communications Research, Inc.
There have been many other individuals who have contributed to the
development of this product who are too numerous to name. Their help is
recognized and appreciated, though.
=============================================================================
9. Third Party Copyrights
=============================================================================
The following copyright (and notice) apply to the modified MPACK/MUNPACK
used by ESS-Code. Since the two utilities have been modified (in cosmetic
terms only) the names "mime" and "unmime" have been used instead of the
original names.
(C) Copyright 1993, 1994 by Carnegie Mellon University
All Rights Reserved.
Permission to use, copy, modify, distribute, and sell this software
and its documentation for any purpose is hereby granted without fee,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of Carnegie Mellon
University not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior
permission. Carnegie Mellon University makes no representations about
the suitability of this software for any purpose. It is provided "as
is" without express or implied warranty.
CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
SOFTWARE.
Portions of this software are derived from code written by Bell
Communications Research, Inc. (Bellcore) and by RSA Data Security,
Inc. and bear similar copyrights and disclaimers of warranty.
--
Portions of this product are copyrighted by Borland International, Inc.
Trademarks are property of their respective owners.