home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware 1 2 the Maxx
/
sw_1.zip
/
sw_1
/
TEXT
/
TM302NEW.ZIP
/
TELEMA.302
Wrap
Text File
|
1992-06-23
|
11KB
|
255 lines
Telemate 3.02 23 June, 1992
==============================
. This minor release provides better compatibility with Windows 3.1
and Avatar terminal emulation and fixes the known bugs. For
details on upgrading from a previous version, please read the
file UPGRADE.DOC in package #3.
. Telemate registration may be available through CompuServe's new
shareware registration service. Please go to the SWREG forum to
in check if the service is available.
What's new
==========
. Windows 3.1 compatible, the mouse pointer in a window now works
correctly.
. For Microsoft mouse, speed control is left to the mouse driver. The
speed option in the mouse dialog has no effect on Microsoft mouse.
. Add quick search in dial window, e.g. [Ctrl D] jump to the entry.
starting with the letter 'D'.
. Quote [Alt Q] now reformats the paragraph instead of truncating it.
. Add ^G as [DEL] in Wordstar convention.
. In the file dialog, the default file name is now replaced with the
first alphanumeric character. Previously, a [Ctrl Y] is required
to erase the default file name.
. For MouseSystem, it now checks the IRQ number and allows using COM1
and COM3, or COM2 and COM4 together as long as the IRQ is different.
. The CONNECT string is now put in the backscroll window.
. BUSY4 is changed to "NO DIAL", some modems use "NO DIAL TONE", some
use "NO DIALTONE".
. DIALPREFIX1 is changed to "AT DT". Many users were not aware that there
is a prefix pointer in the phone directory.
. The auto-download sequence for HSLink external protocol is changed
to "HS*^BR".
. TMINST.EXE now sets the interrupt number according to the IRQ number
automatically, unless specified differently.
. TMINST.EXE now change the prefix and suffix in TM.FON if a different
default prefix/suffix is chosen.
. TMPHONE.EXE now updates the saved dial list in TM.CFG.
. TMPHONE.EXE now only prints non-blank entries.
What's fixed
============
. Intel 9600EX did not switch baud at BUSY signal.
. ^[[4m did not underline in monochrome monitor.
. Avatar ^V^Y was not recursive.
. ANSI/VT102 control mode (e.g. add line feed) was not reflected in the
Options/Terminal dialog.
. Long download/upload pathname caused memory problem after a transfer.
. Did not transfer if the carrier signal is always low (e.g. the
carrier signal wire is missing in the modem cable).
. CIS Quick B protocol could not open read only file.
. Zmodem dit not set the file date correctly.
. FOSSIL connection might disable other COM ports.
. Chat mode did not handle status line and menu bar toggling correctly.
. Fixed a bug in STRINS in TMScript.
. HOST.SCR did not work on different drive.
. PRINT "^^A" in TMScript printed ^^A, it should print ^A.
. "Set AutoRedial" was misspelled "Set AutoDial" in TMSCRIPT.DOC.
. Load macro only loaded the first 60 characters.
. DIR displayed a read only directory as a normal file.
. DIR /W in DOS window did not add up the file size correctly.
. DIR in DOS window did not check for invalid drive.
. The swap left/right button option in the mouse dialog did not work
correctly for two buttons mouse.
. When reloading configuration, the connection field did not take effect.
. Path checking did not work correctly on some networks because they
do not support the "nul" device. Now it will attempt to create a
"nul$$$$$.$$$" file.
. TMSTAT.EXE interpreted "4:0.3" as "0-4:0.3" in TMSTAT.CFG.
Telemate 3.01 3 January, 1992
================================
In this release, we add a new dialog manager, Avatar 0+, internal Kermit,
enhanced script language and a lot of convenient functions such as file
name tagging, auto redial, keystroke macro sequence and screen saver.
All of them will make telecommunication more enjoyable.
What's new
==========
Dial Window
-----------
. Auto Redial upon carrier lost.
. Multiple phone line support, similar names are removed from the
dial list.
. Select or de-select dial entries with [Spacebar] or mouse click.
. Strip High Bit, Long Distance, Tag Separater and Initial Guessing
option in phone directory.
. Auto Log (previous Auto Open Log) in phone directory will turn on/off
the log file automatically.
. Dial bar color selection.
. Remove (or clear) a dial entry in Dial window.
. Default COM port in Dial window now uses the current COM port.
. Default Baud rate (0) in Dial window.
. Dial Break string, default is "RING^M".
. Reload phone directory if necessary after DOS shell, can use
TMPHONE.EXE during the DOS shell.
Terminal Window
---------------
. Avatar 0+ terminal emulation.
. Prism terminal emulation.
. Kermit with 8th-bit encoding and run-length-encoding.
. 4 more (8 total) external protocols.
. Select multiple files with [Spacebar] in directory when uploading.
. Multiple files can now pass to external protocol batch file.
. BIOS 14h and FOSSIL connection.
. Space and Mark parity.
. Xmodem-1K.
. Xmodem upload uses a 4K read-ahead buffer if you have enough memory.
. Xmodem download and its variation use the actual name instead of
"UNKNOWN.$$$" during the download.
. [Alt S] displays both .SCR and .TMS in the script directory.
. Finer pacing in measure of 1/20 seconds instead of 1/10.
. File name guessing accepts digit as starting character.
. The block fields and the remote system field in the transfer
window are removed.
. Quote margin cuts off the quoting message at the margin instead
of reformatting it.
. Turn off 16550 FIFO when exit.
Edit/View/Back/DOS/Clipboard Window
-----------------------------------
. Tag [Alt G] file names in the Edit, View and Back window. [Alt G] is
a lot like [Alt C] but it copies the only file names in the marked
text. You can select a space (for PCBoard, QBBS, etc), a carriage
return (for Wildcat, etc) or comma (for GENie, etc) as the tag
separater. [Shift Alt G] appends instead of copies.
. Support CUA-like text marking. E.g. Shift-Right will start marking.
[Ctrl Ins] as [Alt C], [Shift Ins] as [Alt P], and [Ctrl Del] as
[Alt U].
Note: CUA uses [Shift Del] as cut.
. Clear View window.
. DOS 5's look in the DOS command window.
. DEL in DOS command window support /p as the prompt command.
. INSIDE supports ARJ and ZOO and use /p as pause command.
. Larger Clipboard.
. Tag file names and Clear in Clipboard.
Macro
-----
. ^- keystroke simulation macro symbol which generate keystroke
as if they are typed in from the keyboard.
. In ^= macro sequence, you can add a ^[ after the ^M if you want
to hide the DOS command window after executing the command.
. Redefinable F1, PgUp and PgDn keys.
. Support for enhanced keyboard, redefinable extra cursor keys.
. Doorway mode supports enhanced keyboard.
. Seperation of [Ctrl H] and [Back space].
Dialog/Option
-------------
. Enhanced dialog manager supports hot-key using a single character
key or an alt key combo. [Tab]/[Shift Tab] will jump to the
next/previous group. [Up]/[Down] will move to the next/previous item.
Only one [Enter], instead of two, is needed to activate the default
button.
. Maximum DOS shell. When On, RTS will be dropped if RTS/CTS flow control
is On. Otherwise, the COM port will be disabled during the DOS shell
and incoming data will be lost. So this option should be turned on only
if you use RTS/CTS flow control.
. Date format now can has 9 values (0-8)
0 = MM-DD-YY, 1 = DD-MM-YY, 2 = YY-MM-DD
3 = MM/DD/YY, 4 = DD/MM/YY, 5 = YY/MM/DD
6 = MM.DD.YY, 7 = DD.MM.YY, 8 = YY.MM.DD
. Screen saver.
. Log heading option.
. External alarm.
. Reverse mouse left/right button.
. Image, View and Write directory.
. Display free memory information in Status window [F1].
. Default video color for LCD.
. Save 'Display all information' option in file directory.
. Able to print to LPT1 or LPT2. Use TMINST.EXE to set the printer port.
. Add highlite character in menu options.
. Add /N command line option. It works like /O except that it uses the
COM port parameters in TM.CFG.
Script
------
. New SET commands:
SET AutoStop,Off/On.
When On, the script will be halted upon carrier lost. This special
option is reset to Off at the beginning of every script.
SET MaxDosShell,Off/On
SET DateFormat,0-8
SET ScreenSaver,0-99
SET LogFilter,Off/On
SET LogHeading,Off/On
SET ExtAlarm,Off/On
SET AutoRedial,Off/On
SET MultiLine,Off/On
SET Tag,Space/Crlf/Comma
SET DirTelemate,""
SET DirDownload,""
SET DirEdit,""
SET DirImage,""
SET DirLog,""
SET DirScript,""
SET DirUpload,""
SET DirView,""
SET DirWrite,""
. Improved SET command: all SET commands now accept integer as well as
the token (e.g. 'On','Off','TTY','ANSI' etc). A value of 0 is
interperted as 'Off', 1 is 'On'. Others are shown as follows:
SET Connection, Modem(0)/Computer(1)/Fossil(2)/BIOS(3)
SET Parity, None(0)/Odd(1)/Even(2)/Space(3)/Mark(4)
SET Terminal, TTY(0)/ANSI(1)/VT52(2)/VT102(3)/AVATAR(4)/PRISM(5)
SET Tag, Space(0)/Crlf(1)/Comma(2)
. QUERY command: all options that can be set by the SET command can
be queried by the QUERY command. It returned the corresponding
string or integer (not token). In addition, the QUERY command
accept BOARD, PHONE, PASSWORD, TOTAL, LASTCALL and MEMO.
. KEYSTROKE command in the script. This is an equivalent to the keystroke
macro except it does not need the '^-' symbol.
. CONNECTED reports the BBS # connected
. LOADMAC, LOADPAD and LOADKEY: Same as LOADFON
. CONVERTDATE procedure in TOOLBOX3.SCR
. FILEEXIST supports wildcard
. DELETE supports wildcard.
. Adds 'SET AUTOSTOP,ON' in script generated by LEARN
. HOST.SCR is improved so that it detects the correctness of the carrier
signal and issues the "AT&C1" command when necessary. This is the
answer to the most asked question of 'why my host script does not
work?'. It also restores all the options after the host mode is ended.
Others
------
. TMINST.EXE can define the base address, the IRQ and interrupt
number of a COM port.
. TMPHONE.EXE adds COPY command.
. TMSTAT.EXE supports an optional TMSTAT.CFG which describes telephone
rate in details.
. ROLALARM.EXE as an external alarm.
. CONVERT.EXE converts PROCOMM+ 1.x, QMODEM 4.2x and TELIX 3.1x phone
directory to TELEMATE's.