home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware 1 2 the Maxx
/
sw_1.zip
/
sw_1
/
TEXT
/
PDX_ALL.ZIP
/
TI376.ASC
< prev
next >
Wrap
Text File
|
1991-09-11
|
2KB
|
67 lines
PRODUCT : PARADOX NUMBER : 376
VERSION : 3.X
OS : DOS
DATE : September 11, 1991 PAGE : 1/1
TITLE : INSTALLING PARADOX WITH DOS 4.01
There is a known installation problem with Paradox 3.X and MS-DOS
Version 4.01. It is possible to encounter an error when
installing Paradox with the System I diskette. The following
workaround will enable you to install Paradox 3.X. The reason
for the workaround is due to the fact that MS-DOS version 4.01
was released after Paradox 3.X was released.
1. Rename your Autoexec.bat file. This is done as follows:
At your DOS prompt, type CD C:\ then press <Enter>
Type REN Autoexec.bat Autoexe1.bat then press <Enter>
2. Rename your Config.sys file. This is done as follows:
Type REN Config.sys Config1.sys then press <Enter>
3. Press <Ctrl><Alt><Del> to reboot your PC.
4. When your DOS prompt appears, install Paradox 3.X.
5. When Paradox 3.X is successfully installed, rename your
Autoexe1.bat file to Autoexec.bat. This is done as follows:
At your DOS prompt, type CD C:\ then press <Enter>
Type REN Autoexe1.bat Autoexec.bat then press <Enter>
6. Rename your Config1.sys file. This is done as follows:
Type REN Config1.sys Config.sys then press <Enter>
7. Press <Ctrl><Alt><Del> to reboot your PC.
8. You are now ready to use Paradox 3.X.