GameStar Special 2002 April/GSSH42002.iso/EDITOREN/DS/gmax/gmaxinst_1-1.exe/gmaxsetup11.cab/gmax.exe/string.txt

Text File | 2002-02-13 | 23KB | 674 lines

1    3DSMAX
2    3ds max 4
3    3ds max 4 - Untitled
4    Stop Animation
5    Hardware lock drivers are not installed.\nApplication will terminate
6    No hardware lock found.\nApplication will terminate
7    OK
8    3ds max 4 Educational - Not for Commercial Use
9    3ds max 4 Educational - Not for Commercial Use - Untitled
10    Educational Release XXX
11    0
12    3ds max 4 Apprentice - Not for Commercial Use
13    3ds max 4 Apprentice - Not for Commercial Use - Untitled
15    Permedia Hardware
16    About 3DS MAX Apprentice
17    About 3D Studio MAX Apprentice
18    3D Studio MAX Apprentice from Kinetix
19    3ds max 4 - Unregistered Version
20    3ds max 4 NFR - Not for Resale
24    3ds max 4 Commercial
25    3ds max 4 Educational
26    3ds max 4 Apprentice
28    English
30    Spacing Tool
31    Layer Properties|Change the Properties of the Layer
202    Window / Crossing
216    Dual Plane Toggle
280    Spinner Snap Toggle
319    Show last rendered image
458    gmax 4 Commercial
1015    Use Pivot Point
1048    Choose sub-object selection level
1090    Show end result on/off toggle
1091    Active/inactive modifier toggle
1108    Remove modifier from the stack
1154    Make unique
1399    Step down in the history
1400    Step up in the history
1401    Pin Stack
39070    Create
39071    Modify
39073    Hierarchy
39074    Motion
39075    Display
40001    About this version of 3ds max
40003    Open an existing 3ds max scene
40004    Create a new scene
40005    Reset the 3ds max program
40006    Save the current scene, with its given name
40007    Save the current scene under a specified name
40008    Save selected scene elements to a file
40010    Import a 3D scene or object
40011    Export the scene or object
40012    Print the Current Viewport
40013    Exit 3ds max
40014    Close the current 3ds max scene
40015    Undo the last operation
40016    Redo the last "undone" operation
40020    Delete the selected object
40021    Select all objects in the scene
40022    Bring up the property sheet for the selected objects
40023    Choose and configure a viewport layout
40024    Set up the display grid
40025    Set up units of measure
40026    Render the current scene
40027    Bring up the Video Post editor
40028    Set the ambient light for the scene
40029    Set the atmospheric properties of the scene
40030    Configure the renderer
40031    Direct the rendered output image to the editor viewport
40032    Direct the rendered output image to a framebuffer
40033    Create an AVI animation preview
40034    Load a keyframe generating utility
40035    View single-frame and animation image files
40036    Brings up the online reference
40037    Help system keyword search
40038    Help system index
40039    Current 3ds max status
40040    Information about the scene
40041    Replace the selected object
40042    Toggle viewport/edit panel placement
40043    De-select everything
40044    Invert the current selection set
40047    View information about the current scene
40048    Rendering Options Dialog
40049    Test Bitmap Manager functionality
40050    Opens a new Material Library
40051    Save the Current Material Library
40052    Save the Current Material Library as a New Name
40056    Profile 30 complete redraws of the active viewport
40057    No No please no more boxes!
40058    Open Tree View Window
40069    Brings up smart heap debug dialog
40072    Snap Toggle
40074    Angle Snap Toggle
40075    Lock Selection Set
40078    Display/Hide the Home Grid in the Active Viewport
40079    Move the Origin of the Home Grid
40080    Reset the Home Grid to the World Origin
40083    Activate the Home Grid for Construction
40084    Activate the Selected Grid Object for Construction
40085    Archive the current project
40086    View A File
40087    Save a temporary copy of the scene
40088    Reload the previously "held" scene
40092    Remove Named Selections
40093    Launch the floating transform type-in dialog
40094    Set up viewport rendering parameters
40095    Set up a background
40098    Configure grid and snap settings
40101    Redo last viewport adjustment
40104    Undo last viewport adjustment
40105    Toggle display of axis icon
40107    VTR output settings
40108    Set 3ds max working preferences
40109    Select by object color
40110    Select by material
40111    Select by smoothing group
40112    Select by name
40113    Align Selected Objects
40114    Array
40130    Redraw all views
40131    Set Window Region Select (Selected objects lie entirely within window)
40132    Set Crossing Region Select (Selected objects lie within or on selection boundary)
40139    Toggle display of dependencies
40140    Create a group
40141    Ungroup the selected group
40142    Open an existing group
40143    Close an open group
40144    Detach group objects
40145    Explode the group
40146    Attach group objects
40148    Object Properties|Show the properties of the selected object(s).
40168    Display the current modifier stack
40169    Toggle automatic cache reduction
40170    View a previously-created preview
40171    Rename an AVI preview
40172    Display hierarchy links
40173    Align the grid to the current view
40174    Full Interactivity toggle
40184    Degradation Override
40195    Merge parts of another scene into this one
40207    Bring up the online tutorials
40208    Help Mode
40210    Mirror Selected Objects
40212    Smooth shade selected objects
40213    Clone the selected objects
40218    Bring up additional help
40219    Place Highlight
40220    Snap Shot
40223    Percent Snap
40224    Relative/Absolute Snap
40225    Relative Snap
40226    Absolute Snap
40227    Save the view parameters for the active view
40228    Restore the view parameters for the active view
40229    View an AVI file using Media Player
40230    Window Selection
40231    Crossing Selection
40245    Replace objects' geometry with like-named objects in another scene.
40249    Match camera to view
40250    Restrict to X
40251    Restrict to Y
40252    Restrict to Z
40253    Restrict to XY Plane
40254    Restrict to YZ Plane
40256    Restrict to ZX Plane
40264    Expert Mode
40265    Launch the floating display dialog
40266    Launch the floating selection dialog
40276    Display key times along trajectories
40278    New track view
40279    Delete track view
40280    Open Track View
40281    Open Track View
40282    Open Track View
40283    Open Track View
40284    Open Track View
40285    Open Track View
40286    Open Track View
40287    Open Track View
40288    Open Track View
40289    Open Track View
40290    Open Track View
40291    Open Track View
40292    Open Track View
40312    Launch the material/map browser
40313    Show ghosting
40314    Update display during spinner drag
40321    Update background image
40337    Reset background transform
40340    Insert animation tracks into the selected object or hierarchy.
40342    Deactivate all maps
40343    Osnap Toggle
40347    http://ktx.com/3dsmax/html/hyperlinks.html
40349    http://www.ktx.com/html/product_support.html
40350    http://support.ktx.com/~4
40351    http://www.ktx.com
40352    http://ktx.com/3dsmax/html/hyperlinks.html
40354    Updates your local help files with newer files from the Internet
40365    Connects to the internet for support and information
40370    Load custom user interface configuration
40371    Save custom user interface configuration with its given name
40372    Save custom user interface configuration with a specified name
40374    Set file properties
40403    Start the RAM Player
40429    New schematic view
40430    Delete schematic view
40431    Open Schematic View
40432    Open Schematic View
40433    Open Schematic View
40434    Open Schematic View
40435    Open Schematic View
40436    Open Schematic View
40437    Open Schematic View
40438    Open Schematic View
40439    Open Schematic View
40440    Open Schematic View
40441    Open Schematic View
40442    Open Schematic View
40443    Open Schematic View
40468    Open a script for editing
40469    Create a new script
40470    Run a script
40471    Enable/Disable MAXScript Macro Recording
40472    Open the Listener window
40504    Launch the Walkthrough Assistant
40525    Create a line
40526    Create a multi-line shape
40527    Create an n-sided polygon
40528    Create a rectangle shape
40529    Create an arc
40530    Create a circle
40531    Create a donut shape
40532    Create an ellipse shape
40533    Create a text object
40534    Create a sphere object
40535    Create a box object
40536    Create a geodesic sphere object
40537    Create a cylinder object
40538    Create a torus object
40539    Create a plane object
40540    Create a cone object
40541    Create a tube object
40542    Create a pyramid object
40543    Create a wall object for doors and windows
40544    Create a hedra object
40545    Create a chamfer cylinder object
40546    Create a capsule
40547    Create a gengon object
40548    Create a chamfer box object
40549    Create an oil tank object
40550    Create a spindle object
40551    Create a prism object
40560    Fillet/Chamfer the Selected vertex or edge
40561    Apply the Edit Spline modifier
40562    Apply the Edit Mesh Modifier
40563    Collapses the selected object's modifier stack
40564    Make the selected object follow a path
40646    Select All Objects on a Layer
40681    Edit AutoCAD Object Properties
40684    Connects to the internet for Plug-in support and information
40685    Insert a Lightscape light
40716    Absolute Mode Transform Type-In
40719    Offset Mode Transform Type-In
40720    Allows the user to enter a new license authorization
50001    Select and Move|Select and Move Objects
50002    Select and Rotate|Select and Rotate Objects
50003    Select and Non-uniform Scale|Select and Non-uniformly Scale Objects
50004    Restrict to X
50005    Restrict to Plane
50006    Restrict to Y
50007    Restrict to Z
50008    Select and Uniform Scale|Select and Uniformly Scale Objects
50009    Use Transform Coordinate Center
50010    Select and Link|Create Link from Child to Parent
50011    Unlink Selection|Break an Existing Link
50012    Align
50019    Go to Start
50020    Previous Frame
50021    Play Animation
50022    Next Frame
50023    Go to End
50024    Next Key
50025    Open Track View
50026    Previous Key
50027    Select object
50028    Region Selection Type
50029    Select by Name
50030    Render Last
50031    Quick Render
50032    Snap
50033    Angle Snap
50034    Undo
50035    Redo
50036    Bind to Space Warp
50038    Select and Squash|Select and Squash Objects
50039    Use Pivot Point Center
50040    Use Selection Center
50041    Use Transform Coordinate Center
50042    Restrict to XY Plane
50043    Restrict to YZ Plane
50044    Restrict to  ZX Plane
50045    Rectangular Selection Region
50046    Circular Selection Region
50047    Fence Selection Region
50048    Material Editor
50049    Edit Stack
50050    Utilities
50051    Percent Snap
50052    Play Selected
50053    2D Snap Toggle
50054    2.5D Snap Toggle
50055    3D Snap Toggle
50056    Snap Dialog
50057    Snaps
50058    Options
50059    Osnap Highlight
50060    Home Grid
50061    Open Schematic View
50062    Filters
50063    Zoom Selected Viewport Objects
50064    Min/Max Toggle
50071    Schematic View %d
50072    Select
50073    World
50074    User Grids
50075    Pan
50076    Zoom
50077    Region Zoom
50078    Zoom Extents
50079    Zoom Extents Selected
50080    Link
50081    Unlink Selection
50082    Click or click-and-drag to select objects
50083    Click and drag to pan view
50084    Click and drag up-and-down to zoom in and out
50085    Click and drag a region to zoom into
50086    Click to select an object, then drag to assign it a parent
50087    Select
50088    Hierarchy Mode
50089    References Mode
50090    Delete Objects
50091    Synchronize Selection
50092    Auto-Arrange Graph Nodes
50093    Toggle Visibility Downstream
50501    Set Current Layer|Make Object's layer the Current Layer
50502    Layer List|Select a Layer to make it current.
55024    %s\Network\%s
55025    Max.log
55026    %s\%s
55027    gmax.log
55029    \n------------    3ds max Log File   -------------\n\n
55030    \n------------    gmax Log File   -------------\n\n
55032    gmax Educational - Not for Commercial Use
55033    gmax Educational - Not for Commercial Use - Untitled
55034    gmax Apprentice - Not for Commercial Use
55035    gmax Apprentice - Not for Commercial Use - Untitled
55036    gmax - Unregistered Version
55037    gmax Educational
55038    gmax Apprentice
60006    Key Mode Toggle
60009    Time Configuration
60010    Render Scene
60011    Snap Mode
60012    3D Studio MAX Apprentice (*.app)
60013    3D Studio MAX Apprentice Driver Setup
60014    Active/inactive modifier toggle (Viewports)
60015    Your C-Dilla license is not properly authorized.  Contact product support.
60017    This application has become unstable and must exit.
60018    Authorize 3ds max 4
60020    Please enter the authorization code.  You can write down the application ID given above and type in the authorization code when you run again.
60021    An invalid normal array was encountered.\nThe program will terminate.
60022    The C-Dilla runtime driver is not installed.  Please refer to your installation guide.
60024    Can't install C-Dilla trial license for network rendering.  Contact product support.
60025    The C-Dilla network render license is corrupt.  You will need to re-authorize the product.  Contact product support.
60026    An internal software error has been detected.
60027    The main C-Dilla license is corrupt.  You must re-authorize the product.
60029     (1/4x)
60030     (1/2x)
60031     (2x)
60032     (4x)
60033    Hardware lock is not attached,\nor you are using the wrong lock,\nor the lock device drivers are not running.
60034    Cannot initialize the network lock drivers.  Please check your network lock installation.
60035    No more network lock timers are available.
60036    The network lock server has failed.  Please check your network hardware lock. 3ds max 4 will now exit.
60037    You do not have the correct hardware lock attached, or there is a problem with your network license. 3ds max 4 cannot run.
60039    You do not have any program associated with HTML files.   Please install a browser.
60040    Internet Browser Error
60041    An unknown error occurred while trying to launch your browser.
60042    You must first connect to the Internet to use this feature.
60043    Internet
60044    http://www.discreet.com/support/max/
60045    Particles Only
60046    Compressed
60047    Uncompressed
60048    WriteCompressed
60049    General
60050    Mesh Totals
60051    Vertices:
60052    Faces:
60053    Scene Totals
60054    Objects:
60055    Shapes:
60056    Lights:
60057    Cameras:
60058    Helpers:
60059    Space Warps:
60060    Total:
60061    External Dependencies
60062    Objects
60063    Materials
60064    Used Plug-Ins
60065    3ds max Version:
60066    Summary
60067    Contents
60068    Custom
60069    Add
60070    Update
60071    Name
60072    Value
60073    Type
60074    Text
60075    Date
60076    Number
60077    Yes or No
60078    Yes
60079    No
60080    DefaultKeyLight
60081    DefaultFillLight
60082    The scene already contains an object or light with the name\nDefaultKeyLight.\n\nYou must rename or delete that object or light before\nadding the key light to the scene.
60083    The scene already contains an object or light with the name\nDefaultFillLight.\n\nYou must rename or delete that object or light before\nadding the fill light to the scene.
60084    Ortho
60087    This software application appears corrupt.\n It cannot continue.
60088    Unable to write temporary file on application drive.
60089    Disk Error
60090    Channel A
60091    Channel B
60092    %d Frame(s)
60093    Memory: %d MB
60094    RAM Player
60095    Empty
60096    Frame: %d of %d
60097    Pixel (%d, %d) - (R:%3d  G:%3d  B:%3d)
60098    Average Frame Rate: %.1f
60099    Used Memory:  %ld / %ld MB
60100    Available Memory:  %ld / %ld MB
60101    Loading Frame %d of %d
60102    Open File,
60103    VFB
60104     (Alpha)
60105    Save File,
60107    http://www.maxusers.com
60108    Moving key(s) from %s to %s (%s)
60109    Copying key(s) from %s to %s (%s)
60110    Key Properties
60111    All
60112    Delete Key
60113    Delete selected keys
60114    All Keys
60115    All Transform Keys
60116    Current Transform
60117    Object
60118    Material
60119    Filter
60120    Go to Time
60121    Autobak
60122    MaxBack.bak
60124    prerelease
60125    commercial
60126    educational
60127    (Not For Resale)
60128    Open Channel A
60129    Open Channel B
60130    Close Channel A
60131    Close Channel B
60132    Save Channel A
60133    Save Channel B
60134    Open Last Rendered Image in Channel A
60135    Open Last Rendered Image in Channel B
60136    Channel A (toggle)
60137    Channel B (toggle)
60138    Horizontal/Vertical Split Screen
60139    First Frame
60140    Previous Frame
60141    Next Frame
60142    Last Frame
60143    Playback Forward
60144    Playback Reverse
60145    Double Buffer (toggle)
60146    Starting 3ds max 4...
60147    Print...
60148    Print Setup...
60149    Layer Properties...
60150    Spacing Tool...
60151    Modify the Print Settings
60153    Print Preview...
60154    Print Preview
60157    Ortho Toggle
60158    Measurement
60159    Caustics
60160    Generate
60161    (Discreet internal)
60162    3ds max RXXX NFR
60164    Checked By
60165    Client
60166    Date Completed
60167    Destination
60168    Disposition
60169    Division
60170    Document Number
60171    Editor
60172    Forward To
60173    Group
60174    Language
60175    Mailstop
60176    Matter
60177    Office
60178    Owner
60179    Project
60180    Publisher
60181    Purpose
60182    Received From
60183    Recorded By
60184    Recorded Date
60185    Source
60186    Status
60187    Telephone Number
60188    Typist
60190    Exceeds Display Limit
60191    Bad value for AutoHeight
60192    GlobIllum
60193    Hardware lock or its driver is not functioning.
60194    Hardware lock failure -- program must terminate.
60195    Unable to write temporary file;\nwriting uncompressed scene file.
60196    Untitled.max
60197    _recover.max
60198    Application Error
60199    An error has occurred and the application will now close.\nDo you want to attempt to save a copy of the current scene?
60200    An error has occurred and the application will now close.\nNo scene changes have occurred since your last save.
60201    Recovery failed.\nThe application will now close.
60202    The scene has been saved to %s\nThe application will now close.\nNote: The contents of this file may not be intact depending on the severity of the error.
60203    Start time: %s
60204    End time: %s
60205    Range: %s - %s
60206    Show Selection Range
60207    Show Sound Track
60208    Snap To Frames
60209    Configure
60210    Show Frame Numbers
60211    The scene was corrupted but an attempt to recover the intact parts of the scene has been saved to %s
60214    An error occured during a drag and drop operation.\nThe file "%s" was unavailable.
60215    The application has run out of memory and will now close.\nDo you want to attempt to save a copy of the current scene?
60216    The application has run out of memory and will now close.\nNo scene changes have occurred since your last save.
60217    Out of Memory
60218    gmax
60219    gmax - Untitled
60220    About this version of gmax
60221    Current gmax status
60222    Set gmax working preferences
60223    Authorize gmax
60224    gmax Version:
60225    Starting gmax...
60226    gmax NFR - Not for Resale
60227    An obsolete function ( Interface::RegisterSubObjectTypes() ) was called from the currently selected plugin. From gmax on, all subobject types have to be registered through the new methods BaseObject::NumSubObjTypes() and BaseObject::GetSubObjType(int i). The currently selected plugin is not returning any values from these new methods and  thus will have no subobjects available. Please check the SDK help file for more information.
60238    Your software license needs to be augmented.\n\nPlease get a new authorization code.
60240    Your software license needs to be augmented\nbut cannot be modified.\nThe program must exit.
60241    trial
60242    Untitled.gmax
60243    _recover.gmax
60246    gmax BETA - Microsoft Flight Simulator 2002 Pro
63071    The file you dropped into the viewport is currently stored\n in the internet cache. Would you like to copy this file to the\ndownloads directory so that it can survive a purging of the\n cache?
63072    Could not copy the file to the downloads directory. Using the file in the cache instead.
63073    Downloaded %d of %d bytes
63083    Add the dropped file as a background image?
63106    Downloading file %d of %d
63107    Connecting...
63108    Modifier List
63109    Show Modifier Buttons
63110    Hide Modifier Buttons
63111    --------------
63112    Rename
63113    Delete
63114    Cut
63115    Copy
63116    Paste
63117    Paste Instanced
63118    Make Unique
63119    Collapse All
63120    Collapse To
63121    On
63122    Off
63123    Off in Viewport
63124    Off in Renderer
63125    Set
63126    ModifierSetState
63127    Visible
63128    Stack Utilities
63301    Use Pivot Points
63302    Configure Button Sets
63303    Modstack
63304    ModStackHeight
63305    Missing dll: %s - %s
63306    Unknown error while loading application
63307    CommandPanel
63308    Columns
63309    RollupBreakThreshold
63310    Configure Modifier Sets
63311    Show Buttons
63312    Make Reference
63313    Reset Rollup Order
63314    Vertex Colors
63315    Vertex Illumination
63316    Colors + Illumination
63317    Alpha as Grayscale
63318    Controller Properties
63319    Unassigned Modifiers
63320    Reserve
63321    Reserve
63322    Reserve
63323    Reserve
63324    Reserve
63325    Selection Modifiers
63326    Patch/Spline Editing
63327    Mesh Editing
63328    Animation Modifiers
63329    UV Coordinate Modifiers
63330    Cache Tools
63331    Subdivision Surfaces
63332    Free Form Deformations
63333    Parametric Modifiers
63334    Surface Modifiers
63335    Conversion Modifiers
63336    Lightscape Modifiers
63337    Reserve
63338    Reserve
63339    Reserve
63340    Reserve
63341    Reserve
63342    Show All Subtrees
63343    Hide All Subtrees
63344    Drag And Drop Modifier
63347    Error. Multiple URLs.
63348    maxhold.bak
63350    ShowAllIcons
63351    ShowAllSets
63352    Show All Sets in List
63353    Add the dropped file as an environment map?
63354    Convert to Base Object
63355    Delete Modifier
63356    Cut Modifier
63357    Paste Modifier
63358    Make Unique
63359    Collapse To
63360    Collapse All
63361    Make Reference
63362    An obsolete function ( Interface::RegisterSubObjectTypes() ) was called from the currently selected plugin. From 3DS MAX 4 on, all subobject types have to be registered through the new methods BaseObject::NumSubObjTypes() and BaseObject::GetSubObjType(int i). The currently selected plugin is not returning any values from these new methods and  thus will have no subobjects available. Please check the SDK help file for more information.
63363    Add Time Tag
63364    More Macros
63365    Macros
63366    Switch to Modify Panel
63367    Switch to Display Panel
63368    Display Preference Dialog Box
63369    Switch to Create Panel
63370    Warning - Obsolete file.
63371    You are about to overwrite a file that may have been created using a previous version of the program or one of its components.\n\nAre you sure?
63372    Warning:\nIt was not possible to save File Properties in\nthis file. Click OK to try to save the rest of\nthe file, or Cancel to cancel the save.
63373    Indefinite
63374    Network
63375    Stand-alone
63376    Permanent
63377    Extendable
63378    Nonextendable