home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1998 January
/
CHIPCD1_98.iso
/
drivers
/
skaner
/
hp
/
hpds26
/
disk4
/
oemsetup.inf
< prev
next >
Wrap
INI File
|
1996-03-17
|
20KB
|
603 lines
;#########################################################################
;
; Copyright 1995 Symbios Logic Inc. All rights reserved.
;
; This file is confidential and a trade secret of Symbios Logic. The
; receipt of or possession of this file does not convey any rights to
; reproduce or disclose its contents or to manufacture, use, or sell
; anything it may describe, in whole, or in part, without the specific
; written consent of Symbios Logic Inc.
;
;########################################################################
;#########################################################################
;
; #BeginDescription
; This is the OEMSETUP.INF file for the HP400A miniport
; #EndDescription
;
; Version History
; ---------------
;
; Date Who Description
; ________ ___ _________________________________________________
; #BeginRevision
; 08/02/95 NHP Changed 17 to 0xffffffff [MiniportDrivers] section
; so that the 400A would load after anyother scsi
; miniports that might be controlling boot devices.
; #EndRevision
; 06/30/95 NHP Initial version.
;
;########################################################################
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, VIDEO, POINTER, KEYBOARD, LAYOUT, SCSI, TAPE, PRINTER, ...
;-----------------------------------------------------------------------
[Identification]
OptionType = SCSI
;-----------------------------------------------------------------------
; LANGUAGES SUPPORTED
; -------------------
;
; The languages supported by the INF, For every language supported
; we need to have a separate text section for every displayable text
; section.
;
;-----------------------------------------------------------------------
[LanguagesSupported]
ENG
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
"HP400A" = HP400A
;-----------------------------------------------------------------------
; OPTION TEXT SECTION
; -------------------
; These are text strings used to identify the option to the user. There
; are separate sections for each language supported. The format of the
; section name is "OptionsText" concatenated with the Language represented
; by the section.
;
;-----------------------------------------------------------------------
[OptionsTextENG]
"HP400A" = "Symbios Logic 400a (HP Version) SCSI Host Adapter"
;-----------------------------------------------------------------------------------------
; SCSI MINIPORT DRIVERS:
;
; Order of the information:
;
; Class driver = Type, Group, ErrorControl, Tag, EventMessageFile, TypesSupported
;
;-----------------------------------------------------------------------------------------
[MiniportDrivers]
HP400A = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 0xffffffff, %SystemRoot%\System32\IoLogMsg.dll , 7
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 0)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;
; 3. InstallOption:
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
set DrivesToFree = {}
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_InstallOption
endif
read-syms Strings$($0)
;
; check to see if Option is supported.
;
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
Debug-Output "SCSI.INF: SCSI option is not supported."
goto finish_InstallOption
endif
set OptionList = ""
;
; Option has been defined already
;
set MiniportDriver = #(Options, $(Option), 1)
set Type = $(#(MiniportDrivers, $(MiniportDriver), 1))
set Group = #(MiniportDrivers, $(MiniportDriver), 2)
set ErrorControl = $(#(MiniportDrivers, $(MiniportDriver), 3))
set Tag = #(MiniportDrivers, $(MiniportDriver), 4)
set EventMessageFile = #(MiniportDrivers, $(MiniportDriver), 5)
set TypesSupported = #(MiniportDrivers, $(MiniportDriver), 6)
set Start = $(!SERVICE_BOOT_START)
installtheoption = +
;
; Code to add files to copy list
;
ifstr(i) $(AddCopy) == "YES"
set DoActualCopy = NO
set FileToCheck = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
endif
ifstr(i) $(DoActualCopy) == NO
shell "subroutn.inf" DriversExist $($0) $(String1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: shelling DriversExist failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_CURRENT
else-ifstr(i) $($R0) == STATUS_NEW
set DoActualCopy = YES
else-ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "SCSI.INF: User cancelled SCSI installation"
goto finish_InstallOption
else
Debug-Output "SCSI.INF: Error reported in DriversExist routine in SUBROUTN.INF"
goto finish_InstallOption
endif
endif
ifstr(i) $(DoActualCopy) == YES
shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: shelling DoAskSourceEx failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set SrcDir = $($R1)
ifstr(i) $($R2) != ""
set DrivesToFree = >($(DrivesToFree), $($R2))
endif
else
Debug-Output "SCSI.INF: User cancelled asking source."
goto finish_InstallOption
endif
install Install-AddCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
Debug-Output "Adding SCSI files to copy list failed"
goto finish_InstallOption
endif
else
set DoCopy = NO
endif
endif
ifstr(i) $(DoCopy) == "YES"
read-syms ProgressCopy$($0)
install Install-DoCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Copying files failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
endif
ifstr(i) $(DoConfig) == "YES"
;
; first run a privilege check on modifying the setup node
;
shell "registry.inf" CheckSetupModify
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto finish_InstallOption
endif
;
; then make a new SCSI entry, the entry is created automatically
; enabled
;
set ServiceNode = $(MiniportDriver)
set ServiceBinary = System32\drivers\#(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set ServicesValues = { +
{Type, 0, $(!REG_VT_DWORD), $(Type) }, +
{Start, 0, $(!REG_VT_DWORD), $(Start) }, +
{Group, 0, $(!REG_VT_SZ), $(Group) }, +
{ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, +
{Tag, 0, $(!REG_VT_DWORD), $(Tag) }, +
{BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } +
}
set ParametersValues = ""
set DeviceValues = {}
set EventLogValues = { +
{EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
{TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } +
}
shell "registry.inf" MakeServicesEntry $(ServiceNode) +
$(ServicesValues) +
$(ParametersValues) +
$(DeviceValues) +
$(EventLogValues) +
Parameters
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "MakeServicesEntry failed for SCSI"
goto finish_InstallOption
endif
endif
set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
ForListDo $(DrivesToFree)
LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
EndForListDo
Return $(Status)
[Install-AddCopyOption]
;
; Add the files to the copy list
;
AddSectionKeyFileToCopyList Files-ScsiMiniportDrivers +
$(MiniportDriver) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
exit
[Install-DoCopyOption]
;
; Copy files in the copy list
;
CopyFilesInCopyList
exit
;-------------------------------------------------------------------------
; 4. DeInstallOption:
;
; FUNCTION: To remove files representing Option
; To remove the registry entry corresponding to the Option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;-------------------------------------------------------------------------
[DeInstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_DeInstallOption
endif
read-syms Strings$($0)
;
; check to see if Option is supported.
;
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
goto finish_DeInstallOption
endif
set OptionList = ""
;
; fetch details about option
;
set MiniportDriver = #(Options, $(Option), 1)
set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
;
; check to see if file is installed
; if not give success
;
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
ifstr(i) $(STATUS) == "NO"
set Status = STATUS_SUCCESSFUL
goto finish_DeInstallOption
endif
shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
; this could happen if there is no start value or there is no
; key, in which case the option is not installed
set Status = STATUS_SUCCESSFUL
goto finish_DeInstallOption
endif
ifstr(i) $($R1) == $(!SERVICE_BOOT_START)
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(String3)
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto do_removal
endif
ifstr(i) $($R1) == "CANCEL"
goto finish_DeInstallOption
endif
endif
do_removal =+
;
; disable the registry entry
;
shell "registry.inf" RemoveServicesEntry $(MiniportDriver)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: Failed to shell RemoveServicesEntry"
goto finish_DeInstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "SCSI.INF: Failed to disable services entry"
goto finish_DeInstallOption
endif
;
; we won't remove the file because we can only do so during the next boot.
; if the user chooses to reinstall the same driver during this boot
; he will still end up deleting the driver on next boot. if the file
; should be deleted a warning should be put up saying that the user should
; not try to reinstall the driver during this boot
;
; AddFileToDeleteList $(FilePath)
set Status = STATUS_SUCCESSFUL
finish_DeInstallOption =+
return $(Status)
;-------------------------------------------------------------------------
; 5. GetInstalledOptions:
;
; FUNCTION: To find out the list of options which are installed
;
; INPUT: $($0): Language to Use
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_FAILED
;
; $($R1): List of options installed
; $($R2): Option installed Text List
;-------------------------------------------------------------------------
[GetInstalledOptions]
set Status = STATUS_FAILED
set InstalledOptions = {}
set InstalledOptionsText = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_GetInstalledOptions
endif
set OptionList = ^(Options, 0)
ForListDo $(OptionList)
set MiniportDriver = #(Options, $($), 1)
set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
ifstr(i) $(STATUS) == "YES"
shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
ifint $($ShellCode) == $(!SHELL_CODE_OK)
ifstr(i) $($R0) == STATUS_SUCCESSFUL
ifstr(i) $($R1) != $(!SERVICE_DISABLED)
set OptionText = #(OptionsText$($0), $($), 1)
set InstalledOptions = >($(InstalledOptions), $($))
set InstalledOptionsText = >($(InstalledOptionsText), $(OptionText))
endif
endif
endif
endif
EndForListDo
set Status = STATUS_SUCCESSFUL
finish_GetInstalledOptions =+
Return $(Status) $(InstalledOptions) $(InstalledOptionsText)
;**************************************************************************
; PROGRESS GUAGE VARIABLES
;**************************************************************************
[ProgressCopyENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT is not correcly installed. Are you sure you want "+
"to cancel copying files?"
ProCancelCap = "Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[StringsENG]
String1 = "Symbios Logic 400a (HP Version) SCSI Host Adapter"
String2 = "Please enter the full path to the OEM SCSI "+
"Adapter files. Then choose Continue."
String3 = "The SCSI Adapter has been marked as a boot device. Removing "+
"it may cause the system not to boot."$(!LF)$(!LF)"Are you sure "+
"you want to remove the Adapter."
[Source Media Descriptions]
1 = "HP Scanning Software Disk 1" , TAGFILE = hp400a.tag
[Files-ScsiMiniportDrivers]
HP400A = 1,HP400A.sys , SIZE=999