home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1997 April (Special)
/
Chip-Special_1997-04_cd.bin
/
spea
/
mercury
/
mst5x237
/
mst5x237.exe
/
INSTALL.DAT
< prev
next >
Wrap
Text File
|
1995-05-22
|
13KB
|
287 lines
@DefineProject
@Name = "SPEA BigMicro"
@Version = "Release 0595.3"
@Subdir = "\\SPEA\\GDC"
@OutDrive = C
@Requires @HardDisk
@EndProject
@DefineVars
@QString @d8 = "\n\n\n\n\n\n\n\n"
@Drive @ustdrv = C @Dir @ustdir = "\\USTATION\\"
@If (@L==1)
@QString @t133 = " Use the keys [] and [] to select. Press [─┘] to continue."
@QString @t330 = " For which graphics board do you want to install \n @Name for Micro Station 5.0 ?"
@QString @t331 = " graphics subsystem"
@QString @for = "for"
@QString @Driver = "driver"
@QString @t151 = " Contents:"
@QString @Series = "Series"
@Endif
@If (@L==2)
@QString @t133 = " Benutzen Sie die Tasten [] und [] zur Auswahl. Bestätigen Sie mit [─┘]."
@QString @t330 = " Für welche Graphikkarte wollen Sie \n @Name für Micro Station 5.0 installieren?"
@QString @t331 = " Graphiksubsystem"
@QString @for = "für"
@QString @Driver = "Treiber"
@QString @t151 = " Inhalt:"
@QString @Series = "Serie"
@Endif
@EndVars
@ScrHead(1, M, 0, 63, "$062@Name $063@for Micro Station 5.0 @Version")
@Display @Cls
@t151
v2.37 (2D) @for SPEA V7 Series
v2.37 (2D) @for SPEA FIRE
v1.60 (3D) @for SPEA FIRE
v2.34 (2D) @for SPEA HiLite/FGA860
@If(@L==2)
WICHTIG: Vor der Installation des/der SPEA BigMicro Treiber für
MicroStation 5.0 muß die Grundinstallation mit der "Superdisk" bzw.
"Utilities" Diskette Ihrer SPEA Graphikkarte(n) durchgeführt sein.
@Else
IMPORTANT: Prior to installing the SPEA BigMicro driver(s) for
MicroStation 5.0, the basic installation must be done with the
"Superdisk" resp. "Utilities" disk of your SPEA graphics card(s).
@Endif // @L
@Pause
@EndDisplay
@GetGroups @LocalWindow (13,39)
@t330
@t133
@d8
@Set S = " SPEA V7 @Series (2D)"
@Set I = " SPEA FIRE / 860GX (2D) "
@Set J = " SPEA FIRE / 860GX (3D) "
@Set T = " SPEA HiLite / FGA860 "
@EndGroups
@DefineVars
@If ('T' [= @Group) @QString @B = "FGA/HiLite" @QString @Checkfile = "GDCINST.EXE" @Endif
@If ('I' [= @Group) @QString @B = "FIRE/FGA860-GX" @QString @Checkfile = "GDCINST.EXE" @Endif
@If ('J' [= @Group) @QString @B = "FIRE/FGA860-GX" @QString @Checkfile = "GDCINST.EXE" @Endif
@If ('S' [= @Group) @QString @B = "SPEA V7" @QString @Checkfile = "S3TEST.EXE" @Endif
@If (@L==1)
@QString @t011 = " Use the keys [] and [] to select a drive. Press [─┘] to continue."
@QString @t012 = " "
@QString @t021 = " Use the SPACE BAR to select YES or NO."
@QString @t022 = " Press [─┘] to continue and create this directory (if YES)"
@QString @t023 = " or to modify the last input (if NO)."
@QString @t031 = " For more information about the configuration of drivers, please refer to"
@QString @t032 = " the @B manual or to file README at the end of this installation."
@QString @t033 = " "
@QString @t041 = " On which disk drive is"
@QString @t042 = "installed at present?"
@QString @t051 = " In which directory is"
@QString @t061 = "does not exist. Do you want to create it?"
@QString @t071 = " Driver installation for\n"
@QString @t072 = "has been prepared successfully."
@QString @t081 = " Directory"
@QString @t091 = " Which directory"
@QString @t101 = "already exists."
@QString @t102 = " Do you want to continue installing in this directory?"
@QString @t111 = " Use the SPACE BAR to select YES or NO. Press [─┘] to continue."
@QString @t121 = " On which disk drive do you want to install the \"@B GDC Utilities\" ?"
@QString @t131 = " For which version of"
@QString @t132 = "do you want to install @B drivers?"
@QString @t141 = " Which language version of AutoCAD is being used ?"
@QString @y = "YES "
@QString @n = "NO "
@QString @t201 = " Please enter the directory in which you want the \"@B GDC Utilities\""
@QString @t202 = " to be installed. The standard name of the directory is: @SubDir"
@QString @t203 = " "
@QString @t204 = "Do you want to continue"
@QString @t205 = " installing the \"@B GDC Utilities\" in this directory?"
@QString @t251 = " On which disk drive did you install\n the @B GDC Utilities ?"
@QString @t252 = " In which directory did you install\n the @B GDC Utilities ?"
@QString @t253 = " does not contain\n the @B GDC Utilities."
@QString @t254 = "does not exist."
@QString @t300 = " Cannot find the \"@B GDC Utilities\" in directory"
@QString @t301 = " If the @B GDC Utilities\n are not installed, press [Esc]."
@QString @t380 = " For which version of"
@QString @t381 = " do you want to install \n @Name for Micro Station 5.0 ?"
@QString @complete = "complete"
@Endif
@If (@L==2)
@QString @t011 = " Mit den Tasten [] und [] können Sie ein Laufwerk auswählen."
@QString @t012 = " Bestätigen Sie mit [─┘]."
@QString @t021 = " Wählen Sie JA oder NEIN mit der LEERTASTE."
@QString @t022 = " Drücken Sie [─┘] zur Fortsetzung (Verzeichnis wird erzeugt, wenn JA)"
@QString @t023 = " oder zur Änderung der letzten Eingabe (wenn NEIN)."
@QString @t031 = " Weitere Informationen zur Treiberkonfiguration entnehmen Sie bitte dem"
@QString @t032 = " @B Handbuch oder der Datei README am Ende dieser Installation."
@QString @t033 = " "
@QString @t041 = " Auf welchem Laufwerk ist"
@QString @t042 = "derzeit installiert?"
@QString @t051 = " In welchem Verzeichnis ist"
@QString @t061 = "existiert nicht. Wollen Sie es erzeugen ?"
@QString @t071 = " Die Treiberinstallation für\n"
@QString @t072 = "wurde erfolgreich vorbereitet."
@QString @t081 = " Verzeichnis"
@QString @t091 = " Welches Verzeichnis"
@QString @t101 = "existiert bereits."
@QString @t102 = " Wollen Sie die Installation in diesem Verzeichnis fortsetzen?"
@QString @t111 = " Wählen Sie JA / NEIN mit der Leertaste. Drücken Sie anschließend [─┘]."
@QString @t121 = " Auf welchem Laufwerk wollen Sie\n die \"@B GDC Utilities\" installieren?"
@QString @t131 = " Für welche Version von"
@QString @t132 = "wollen Sie @B Treiber installieren?"
@QString @t141 = " Welche Sprachversion von AutoCAD wird verwendet ?"
@QString @y = " JA "
@QString @n = "NEIN"
@QString @t201 = " Bitte geben Sie das Verzeichnis an, in dem die"
@QString @t202 = " \"@B GDC Utilities\" installiert werden sollen."
@QString @t203 = " Das Standardverzeichnis hierfür lautet: @SubDir"
@QString @t204 = "Wollen Sie die Installation"
@QString @t205 = " der \"@B GDC Utilities\" in diesem Verzeichnis fortsetzen?"
@QString @t251 = " Auf welchem Laufwerk haben Sie\n die @B GDC Utilities installiert ?"
@QString @t252 = " In welchem Verzeichnis haben Sie\n die @B GDC Utilities installiert ?"
@QString @t253 = " enthält nicht\n die @B GDC Utilities."
@QString @t254 = "existiert nicht."
@QString @t300 = " Kann die \"@B GDC Utilities\"\n nicht finden im Verzeichnis"
@QString @t301 = " Wenn die @B GDC Utilities\n nicht installiert sind, drücken Sie [Esc]."
@QString @t380 = " Für welche Version von"
@QString @t381 = " wollen Sie @Name für MicroStation 5.0 installieren?"
@QString @complete = "beendet"
@Endif
@EndVars
NUTILS:
@GetOutDrive @LocalWindow (20, 39)
@t251
@t011
@t012
@EndOutDrive
@GetSubdir
@t252
@Prompt = "@t091 ([─┘] = @Subdir) ? "
@LocalWindow (13, 39)
@EndSubdir
@If(@Exists "@OutDrive:@SubDir\\@Checkfile") @Else
@Display
@If(@Exists "@OutDrive:@SubDir")
@t081 @OutDrive:@SubDir @t253 @Else
@t081 @OutDrive:@SubDir @t254 @Endif
@t301
@Pause
@EndDisplay
@Goto NUTILS
@Endif /* @Exists */
USTATION:
@GetOutDrive @ustdrv @LocalWindow (20, 39)
@t041 Micro Station 5.0 @t042
@t011
@t012
@EndOutDrive
@GetSubdir @ustdir
@t051 Micro Station 5.0 @t042
@Prompt = "@t091 ([─┘] = @ustdir)? "
@LocalWindow (13, 39)
@EndSubdir
@If(@Exists "@ustdrv:@ustdir") @Else
@ClearOption(0)
@GetOption @Checkbox @LocalWindow (13, 39)
@t081 @ustdrv:@ustdir @t061
@t021
@t022
@t023
@Option 0 = ""
@EndOption
@If(0 [! @Option) @Goto USTATION @Endif
@Endif
@DefineDisk
@Label = "Disk 1 of 1"
@File SHOW.EXE
@If(@L==2) @File BIGMICRO.GER @Out BIGMICRO.DOC @Else @File BIGMICRO.ENG @Out BIGMICRO.DOC @Endif
@BeginLib USTDRVR.LIF
@F MSPEA860.MGL @O @ustdrv:@ustdir\\drivers\\MSPEA860.MGL @Group i
@F MSPEA860.MA @O @ustdrv:@ustdir\\drivers\\MSPEA860.MA @Group i
@F MSPEA860.DLM @O @ustdrv:@ustdir\\drivers\\MSPEA860.DLM @Group i
@F USPEA860.MGL @O @ustdrv:@ustdir\\drivers\\USPEA860.MGL @Group j
@F USPEA860.MA @O @ustdrv:@ustdir\\drivers\\USPEA860.MA @Group j
@F USPEA860.DLM @O @ustdrv:@ustdir\\drivers\\USPEA860.DLM @Group j
@F MSPEAP5.860 @Group ij
@F MSPEA3DV.TXT @Group j
@F MSPEAS3.MGL @O @ustdrv:@ustdir\\drivers\\MSPEAS3.MGL @Group s
@F MSPEAS3.MA @O @ustdrv:@ustdir\\drivers\\MSPEAS3.MA @Group s
@F MSPEAS3.DLM @O @ustdrv:@ustdir\\drivers\\MSPEAS3.DLM @Group s
@F VMODE.EXE @Group s
@F MSPEATMS.MA @O @ustdrv:@ustdir\\drivers\\MSPEATMS.MA @Group t
@F MSPEATMS.MGL @O @ustdrv:@ustdir\\drivers\\MSPEATMS.MGL @Group t
@F MSPEATMS.DLM @O @ustdrv:@ustdir\\drivers\\MSPEATMS.DLM @Group t
@F MSPEAPM.TMS @Group t
@EndLib
@EndDisk
@Finish
@ChDrive @OutDrive
@ChDir ("@Subdir")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "wt", "@@echo off\n")
@If(@L==2)
@If('S' [= @Group)
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem Für S3-EINSCHIRMLÖSUNG:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "SET MSPEAPM=-c10 -v0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 steht für die gewünschte oder mögliche Auflösung)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "\nrem Für S3-S3-ZWEISCHIRMLÖSUNG:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem SET MSPEAPM=-c10 -v0 -lc11 -lv0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 bzw. -lv0 steht für die gewünschte oder mögliche Auflösung)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (Unbedingt SPTUNE ausführen, da sonst die zweite Karte nicht)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (initialisiert werden kann!)\n")
@Else //'S'
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem Für GRAPHITI-EINSCHIRMLÖSUNG:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "SET MSPEAPM=-c0 -v0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 steht für die gewünschte oder mögliche Auflösung)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "\nrem Für GRAPHITI-GRAPHITI-ZWEISCHIRMLÖSUNG:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem SET MSPEAPM=-c0 -v0 -lc1 -lv0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 bzw. -lv0 steht für die gewünschte oder mögliche Auflösung)\n")
@Endif // 'S'
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "\nrem Für GRAPHITI-S3-ZWEISCHIRMLÖSUNG:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem SET MSPEAPM=-c0 -v0 -lc10 -lv0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 bzw. -lv0 steht für die gewünschte oder mögliche Auflösung)\n")
@Else // 2
@If('S' [= @Group)
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem For S3 SINGLE SCREEN:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "SET MSPEAPM=-c10 -v0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 signifies the desired or possible resolution)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "\nrem For S3-S3 DUAL SCREEN:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem SET MSPEAPM=-c10 -v0 -lc11 -lv0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 resp. -lv0 signifies the desired or possible resolution)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (You must absolutely execute SPTUNE to initialize the secondary board)\n")
@Else //'S'
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem For GRAPHITI SINGLE SCREEN:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "SET MSPEAPM=-c0 -v0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 signifies the desired or possible resolution)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "\nrem For GRAPHITI-GRAPHITI DUAL SCREEN:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem SET MSPEAPM=-c0 -v0 -lc1 -lv0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 resp. -lv0 signifies the desired or possible resolution)\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (You must absolutely execute SPTUNE to initialize the secondary board)\n")
@Endif // 'S'
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "\nrem For GRAPHITI-S3 DUAL SCREEN:\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem SET MSPEAPM=-c0 -v0 -lc10 -lv0\n")
@Write ("@OutDrive:\\@SubDir\\MSPEAPM.BAT", "at", "rem (-v0 resp. -lv0 signifies the desired or possible resolution)\n")
@Endif // 2
@If (@System "show BIGMICRO.DOC") @Endif
@EndFinish