home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1997 January
/
Chip_1997-01_cd.bin
/
ms95
/
disk22
/
dir02
/
f008550.re_
/
f008550.re
Wrap
Text File
|
1996-04-02
|
4KB
|
96 lines
; HP Color PCL3 config file
;
; $Logfile: I:/mgds/plot/pltcfg/hp5xxc.plv $
; $Workfile: hp5xxc.plt $
; $Revision: 1.8 $
; If you change this file, please do not disturb the above source control
; information. It will prove useful in the event that a future release
; changes this file.
num_pens = 7 ; Defines pens used
change_pen = both ; options are color, weight, level or both
;
; HPlevel1 - use built-in CMY palette; do RLE compression
; HPlevel2 - use built-in CMY palette; do NOT do RLE compression
; HPlevel3 - use built-in RGB palette; do RLE compression
; HPlevel4 - use built-in RGB palette; do NOT do RLE compression
; HPlevel5 - use built-in KCMY palette; do RLE compression
; HPlevel6 - use built-in KCMY palette; do NOT do RLE compression
;
; Note: The HP500C does not support KCMY modes. Use HPLevel1 for the 500C.
;
model = HPlevel5 ; plotter model number
driver = pcl3 ; MDL driver to use
; rotate=cw ; clockwise rotation
autocenter ; Automatically center plot on page
end_plot=eject ; Performs page eject
border/pen=7 ; plot border, no text
default_extension/auto_incExt = '000'; default extension for plotfiles
;
; To configure a default output file name comment out the default_extension
; line above and uncomment this line. "lpt1" may be substituted with any
; desired filename - e.g. "$(MS_PLTFILES)plotfile.000"
;
;default_outFile/auto_overwrite = "lpt1"
; communication = (handshake=0,baud=9600,par=none,data=8,stop=1)
; English SIZE record
size=(7.8,9.8)/num=2/off=(0,0)/name=letter ; no room for border
resolution(IN)=(0.003333333,0.003333333) ; 300 dpi
; Stroke_tolerance determines tolerance for arcs and circles. Value is
; between 0 and 10 with 10 being the greater tolerance. Larger values
; also create larger plot files.
stroke_tolerance=10 ; unitless num 0 < tol < 10
; for dense filling
pen_width(1)=1
pen_width(2)=1
pen_width(3)=1
pen_width(4)=1
pen_width(5)=1
pen_width(6)=1
pen_width(7)=1
; The seven colors of this device are fixed. The /rgb options tell
; MicroStation's Plot Preview how to show the colors, rather than set
; the colors of the output page.
pen(7)=(0-256)/rgb=(0, 0, 0) ; black
pen(6)=(3,10,19,27,35,43,51,59,67,75,83,91,99,107,115,123,131,139,147,155,163,171,179,187)/rgb=(255, 0, 0) ; red
pen(5)=(2,11,18,26,34,42,50,58,66,74,82,90,98,106,114,122,130,138,146,154,162,170,178,186,246)/rgb=( 0, 255, 0) ; green
pen(3)=(1,17,25,33,41,49,57,65,73,81,89,97,105,113,121,129,137,145,153,161,169,177,185)/rgb=( 0, 0, 255) ; blue
pen(1)=(7,12,15,23,31,39,47,55,63,71,79,87,95,103,111,119,127,135,143,151,159,167,175,183,191)/rgb=( 0, 255, 255) ; cyan
pen(2)=(5,13,21,29,37,45,53,61,69,77,85,93,101,109,117,125,133,141,149,157,165,173,181,189)/rgb=(255, 0, 255) ; magenta
pen(4)=(4,20,28,36,44,52,60,68,76,84,92,100,108,116,124,132,140,148,156,164,172,180,188)/rgb=(255, 255, 0) ; yellow
; The style records define how the design file line codes (styles)
; are to be plotted. Values are in plotter units (resolutions).
; Values determine pen down/up movements, where (10,28) for a dot
; pattern leaves the pen down for 10 units and up for 28 units. The
; /nohardware switch causes software stroking with these values.
style(1)=(12, 36)/nohardware ;style = dot
style(2)=(21, 12)/nohardware ;style = med dash
style(3)=(50, 17)/nohardware ;style = long dash
style(4)=(33, 12, 8, 12)/nohardware ;style = dot-dash
style(5)=(17, 17)/nohardware ;style = short dash
style(6)=(25, 8, 8, 8, 8, 8)/nohardware ;style = dash-dot-dot
style(7)=(33, 8, 17, 8)/nohardware ;style = long dash - short dash
; The weight line determines the number of strokes to use with each weight.
; The first position defines weight 0, second weight 1, third weight 2 and
; so on up to weight 31. To increase or decrease the number of stokes per
; weight, change the number in that position.
weight=(1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32)
; Construction/active points are not plotted by default. Uncomment the
; next line if you want points plotted. Points are plotted 0.1 cm dia.
; point_size = .1