home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1997 January
/
Chip_1997-01_cd.bin
/
ms95
/
disk22
/
dir01
/
f008560.re_
/
f008560.re
Wrap
Text File
|
1996-04-02
|
9KB
|
363 lines
; HP-GL/2 Plotter configuration file - For HP 650c Color Plotter
; $Logfile: I:/mgds/plot/pltcfg/hp650c.plv $
; $Workfile: hp650c.plt $
; $Revision: 6.4 $
; If you change this file, please do not disturb the above source control
; information. It will prove useful in the event that a future release
; changes this file.
; MicroStation starts counting pens at 1, so even though the HP 650c has
; pens 0 through 255, pen 0 is not used by MicroStation.
num_pens = 255 ; Defines pens used - max value is 255
change_pen = both ; options are color, weight, level or both
model = HPGL2 ; plotter model
driver = hpgl2 ; MDL driver to use
autocenter ; Automatically center plot on page
end_plot = eject ; Performs page eject
rotate = cw ; clockwise rotation
default_extension/auto_incExt = '000' ; default extension for plotfiles
;
; To configure a default output file name comment out the default_extension
; line above and uncomment this line. "lpt1" may be substituted with any
; desired filename - e.g. "$(MS_PLTFILES)plotfile.000"
;
;default_outFile/auto_overwrite = "lpt1"
border/pen=1/filename/time ; leave this out for no border
; communication=(handshake=0,baud=9600,par=none,data=8,stop=1)
; The SIZE records defines the plotting area of page. The .27 offset
; given is to allow room for the border record.
; Use the first set when using roll paper and the second set for cut paper.
; Only 5 SIZE records can be defined at one time
; ENGLISH SIZE records
size=(8.5,11.0)/num=0/off=(0.27,0.27)/name=a
size=(11.0,17.0)/num=0/off=(0.27,0.27)/name=b
size=(17.0,22.0)/num=0/off=(0.27,0.27)/name=c
size=(22.0,34.0)/num=0/off=(0.27,0.27)/name=d
size=(44.0,34.0)/num=0/off=(0.27,0.27)/name=e
resolution(IN)=(0.00098425197,0.00098425197) ; specifies both res and units
; ENGLISH SIZE records
; size=(6.28,9.5)/num=0/off=(0.27,0.27)/name=a ; cut sheet
; size=(9.0,14.0)/num=0/off=(0.27,0.27)/name=b ; cut sheet
; size=(14.0,20.0)/num=0/off=(0.27,0.27)/name=c ; cut sheet
; size=(20.0,31.0)/num=0/off=(0.27,0.27)/name=d ; cut sheet
; size=(42.00,32.0)/num=0/off=(0.27,0.27)/name=e ; cut sheet
; The pen_width record determines how far the pen moves when drawing
; thick lines (weights) or when used to fill elements. Values are
; between 0 and 15 with 15 moving the greater distance.
pen_width(1)=3
pen_width(2)=3
pen_width(3)=3
pen_width(4)=3
pen_width(5)=3
pen_width(6)=3
pen_width(7)=3
pen_width(8)=3
pen_width(9)=3
pen_width(10)=3
pen_width(11)=3
pen_width(12)=3
pen_width(13)=3
pen_width(14)=3
pen_width(15)=3
pen_width(16)=3
pen_width(17)=3
pen_width(18)=3
pen_width(19)=3
pen_width(20)=3
pen_width(21)=3
pen_width(22)=3
pen_width(23)=3
pen_width(24)=3
pen_width(25)=3
pen_width(26)=3
pen_width(27)=3
pen_width(28)=3
pen_width(29)=3
pen_width(30)=3
pen_width(31)=3
pen_width(32)=3
pen_width(33)=3
pen_width(34)=3
pen_width(35)=3
pen_width(36)=3
pen_width(37)=3
pen_width(38)=3
pen_width(39)=3
pen_width(40)=3
pen_width(41)=3
pen_width(42)=3
pen_width(43)=3
pen_width(44)=3
pen_width(45)=3
pen_width(46)=3
pen_width(47)=3
pen_width(48)=3
pen_width(49)=3
pen_width(50)=3
pen_width(51)=3
pen_width(52)=3
pen_width(53)=3
pen_width(54)=3
pen_width(55)=3
pen_width(56)=3
pen_width(57)=3
pen_width(58)=3
pen_width(59)=3
pen_width(60)=3
pen_width(61)=3
pen_width(62)=3
pen_width(63)=3
pen_width(64)=3
pen_width(65)=3
pen_width(66)=3
pen_width(67)=3
pen_width(68)=3
pen_width(69)=3
pen_width(70)=3
pen_width(71)=3
pen_width(72)=3
pen_width(73)=3
pen_width(74)=3
pen_width(75)=3
pen_width(76)=3
pen_width(77)=3
pen_width(78)=3
pen_width(79)=3
pen_width(80)=3
pen_width(81)=3
pen_width(82)=3
pen_width(83)=3
pen_width(84)=3
pen_width(85)=3
pen_width(86)=3
pen_width(87)=3
pen_width(88)=3
pen_width(89)=3
pen_width(90)=3
pen_width(91)=3
pen_width(92)=3
pen_width(93)=3
pen_width(94)=3
pen_width(95)=3
pen_width(96)=3
pen_width(97)=3
pen_width(98)=3
pen_width(99)=3
pen_width(100)=3
pen_width(101)=3
pen_width(102)=3
pen_width(103)=3
pen_width(104)=3
pen_width(105)=3
pen_width(106)=3
pen_width(107)=3
pen_width(108)=3
pen_width(109)=3
pen_width(110)=3
pen_width(111)=3
pen_width(112)=3
pen_width(113)=3
pen_width(114)=3
pen_width(115)=3
pen_width(116)=3
pen_width(117)=3
pen_width(118)=3
pen_width(119)=3
pen_width(120)=3
pen_width(121)=3
pen_width(122)=3
pen_width(123)=3
pen_width(124)=3
pen_width(125)=3
pen_width(126)=3
pen_width(127)=3
pen_width(128)=3
pen_width(129)=3
pen_width(130)=3
pen_width(131)=3
pen_width(132)=3
pen_width(133)=3
pen_width(134)=3
pen_width(135)=3
pen_width(136)=3
pen_width(137)=3
pen_width(138)=3
pen_width(139)=3
pen_width(140)=3
pen_width(141)=3
pen_width(142)=3
pen_width(143)=3
pen_width(144)=3
pen_width(145)=3
pen_width(146)=3
pen_width(147)=3
pen_width(148)=3
pen_width(149)=3
pen_width(150)=3
pen_width(151)=3
pen_width(152)=3
pen_width(153)=3
pen_width(154)=3
pen_width(155)=3
pen_width(156)=3
pen_width(157)=3
pen_width(158)=3
pen_width(159)=3
pen_width(160)=3
pen_width(161)=3
pen_width(162)=3
pen_width(163)=3
pen_width(164)=3
pen_width(165)=3
pen_width(166)=3
pen_width(167)=3
pen_width(168)=3
pen_width(169)=3
pen_width(170)=3
pen_width(171)=3
pen_width(172)=3
pen_width(173)=3
pen_width(174)=3
pen_width(175)=3
pen_width(176)=3
pen_width(177)=3
pen_width(178)=3
pen_width(179)=3
pen_width(180)=3
pen_width(181)=3
pen_width(182)=3
pen_width(183)=3
pen_width(184)=3
pen_width(185)=3
pen_width(186)=3
pen_width(187)=3
pen_width(188)=3
pen_width(189)=3
pen_width(190)=3
pen_width(191)=3
pen_width(192)=3
pen_width(193)=3
pen_width(194)=3
pen_width(195)=3
pen_width(196)=3
pen_width(197)=3
pen_width(198)=3
pen_width(199)=3
pen_width(200)=3
pen_width(201)=3
pen_width(202)=3
pen_width(203)=3
pen_width(204)=3
pen_width(205)=3
pen_width(206)=3
pen_width(207)=3
pen_width(208)=3
pen_width(209)=3
pen_width(210)=3
pen_width(211)=3
pen_width(212)=3
pen_width(213)=3
pen_width(214)=3
pen_width(215)=3
pen_width(216)=3
pen_width(217)=3
pen_width(218)=3
pen_width(219)=3
pen_width(220)=3
pen_width(221)=3
pen_width(222)=3
pen_width(223)=3
pen_width(224)=3
pen_width(225)=3
pen_width(226)=3
pen_width(227)=3
pen_width(228)=3
pen_width(229)=3
pen_width(230)=3
pen_width(231)=3
pen_width(232)=3
pen_width(233)=3
pen_width(234)=3
pen_width(235)=3
pen_width(236)=3
pen_width(237)=3
pen_width(238)=3
pen_width(239)=3
pen_width(240)=3
pen_width(241)=3
pen_width(242)=3
pen_width(243)=3
pen_width(244)=3
pen_width(245)=3
pen_width(246)=3
pen_width(247)=3
pen_width(248)=3
pen_width(249)=3
pen_width(250)=3
pen_width(251)=3
pen_width(252)=3
pen_width(253)=3
pen_width(254)=3
pen_width(255)=3
; The style records defines how the design file line codes (styles)
; are to be plotted. Values are in plotter units (resolutions).
; Values determine pen down/up movements, where (14,42) for a dot
; pattern leaves the pen down for 14 units and up for 42 units. The
; /nohardware switch causes software stroking with these values.
style(1) = (14,42)/nohardware ; style = dot
style(2) = (70,42)/nohardware ; style = med dash
style(3) = (168,56)/nohardware ; style = long dash
style(4) = (112,42,28,42)/nohardware ; style = dot-dash
style(5) = (56,56)/nohardware ; style = short dash
style(6) = (84,28,28,28,28,28)/nohardware ; style = dash-dot-dot
style(7) = (112,28,56,28)/nohardware ; style = long dash - short dash
; Units for weight stroke are multiples of .025 mm. Weights may appear
; thicker than normal when plotter is set to "draft" mode. Set plotter
; on "final" setting to see true weight thickness.
weight_strokes=(10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100,105,110,115,120,125,130,135,140,145,150,155,160,165)
; Stroke_tolerance determines tolerance for arcs and circles. Value is
; between 0 and 10 with 10 being the greater tolerance. Larger values
; also create larger plot files.
stroke_tolerance=4.5
; linecap, linejoin and miter_limit values may differ between plotters.
; Check your plotter manual for their definition.
linecap = 1 ; 1=butt, 2=square, 3=triangle, 4=round
linejoin = 2 ; 1=mitered, 2=miter/bevel, 3=triangle,
; 4=round, 5=beveled, 6=no join
miter_limit = 1.5 ; larger values mean longer spikes
; Construction/active points are not plotted by default. Uncomment the
; next line if you want points plotted. Points are plotted 0.1 cm dia.
; point_size = .1
; software_raster allows for plotting of type 87/88 raster elements. Value
; for resolution can be as high as your plotter's resolution. Lower values
; will produce grainier images. Remove comment to plot raster image.
; software_raster/res=32
; Specify color to plot colored raster images
; software_raster/res=32/background=color
; largest_polygon is used only for element filling. The value defines
; the point at which software filling takes over in place of hardware
; filling. The value relates to number of vertices used to draw the
; element.
largest_polygon=2048