home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1997 January
/
Chip_1997-01_cd.bin
/
autocad
/
geniuscz
/
source
/
readme.txt
< prev
next >
Wrap
Text File
|
1995-10-04
|
2KB
|
42 lines
Changes made to Genius LT 1.6:
* CSN standard parts had an addition.
* NSF standard parts no longer display error message.
------------------------------------------------------------------------
Changes made to Genius LT 1.5:
* Genius LT made compatible with AcadLT 1.0 and AcadLT 2.0.
* Minor Corrections made to British (BS) and German (DIN) standards.
* Text line in Pull-down menu for Paper format and Scale changed to "?".
This was necessary because AcadLT 2.0 has a problem if the pull-down title
text needs a second Pull-down menu line.
* The installer was changed: aclt2.mnu is a copy of aclt.mnu.
------------------------------------------------------------------------
Changes made to Genius LT 1.2:
* GENLT.EXE has fixed the toolbox imaging problem that occurred
whenever a REGEN was issued.
* GENACLT.MM (e.g. ACLT.MNU), and GENPOS.DWG (for all countries) were changed
to get the attribute sequence compatible with Genius 12 attributes.
Important for creating parts lists from Genius 12 created elements.
* The installer was changed, which affects all disks, all languages.
* The installation sequence was changed such that Genius LT is
nearly 100% installed before proceding with W32S and/or standard parts.
* Installer creates another 2 batch files (LANGMNU?.BAT) needed for Sweden
or other countries having special issues with location and structure
of the ACLT.MNU file.
* CSN (Czech) standard was added to the 5th disk.
* PN (Polish) standard was added to the 5th disk.
* ANSI was moved from the 5th to the 4th install disk.
* UNI (Italian) standard now has SKF bearings
BE CAREFUL
- In DWGs using inches, parametric might appear the wrong size if created
without a value table. This is dependent upon AutoCAD's drawing units.
* The following applies ONLY to Swedish Genius LT:
- If you have the APPLICATION HANDLER, run the LANGMNU2.BAT file
and then configure the Application Handler so that it finds
the GENACLT.MNU file in the main Genius LT directory.
- If you don't have the APPLICATION HANDLER, copy the ACLT*.MNU files
from the main AutoCAD LT directory to the ORIGINAL subdirectory
off of your AutoCAD LT main directory (if not already there);
delete the ACLT*.MNU from the main AutoCAD LT directory;
run the COPYACL2.BAT file.