home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip Hitware 7 A
/
CHIP_HITWARE_7A.iso
/
Multimedia
/
SoundLimit
/
DATA1.CAB
/
Program_Executable_Files
/
Tosharc
< prev
Wrap
Text File
|
1999-03-16
|
4KB
|
112 lines
# [ @(#)$Id: tosharc,v 1.3 1998/12/22 22:51:57 olli Exp $ ]
#
# Definitions for CD-DA reading on various SCSI CD-ROM drives.
#
# Format:
#
# "vendor" "product" "version" readcmd mdchng dens swab blocks jitter
#
# Fields are separated by white space. There must be exactly
# nine fields in one line to describe one CD-ROM entry.
#
# The first three fields are strings (enclosed in double
# quotes) that are used to identify the CD-ROM drive.
# The strings are matched at the beginning with the given
# length, so "FOO" will match both "FOO" and "FOOBAR". Since
# tosha takes the first match, "FOOBAR" should precede "FOO"
# in this list. For the same reason, a zero-length (empty)
# string matches anything, therefore the catch-all (default)
# entry must come last. When this entry is matched, a
# warning is printed ("drive type not recognized").
#
# The maximum length of the strings (in characters) are:
# vendor string: 8
# product string: 16
# version string: 4
#
# The last six fields specify the parameters to use for
# reading CD-DA with this CD-ROM drive:
# - the code of the read command (byte),
# - whether to change the mode/density (boolean),
# - the density code (byte),
# - whether to swap the bytes of audio data (boolean),
# - the default number of blocks per access (1-26),
# - The number of overlapping blocks for jitter correction
# (0 = no jitter correction).
# Note that byte values can be specified in decimal (0-255),
# hexadecimal (0x00-0xFF) and octal (0000-0377). Boolean
# values must be either 1 (on) or 0 (off).
#
# Needless to say, empty lines are ignored, and comments
# start with "#" in the first column.
#
# If you make any changes to this file to get tosha work with
# your CD-ROM drive, please send me that entry, so I can
# update it in the next release! (Email to olli@fromme.com)
# I'm especially looking for working parameter sets for
# SANYO, MATSHITA, MATSUSHITA and PANASONIC drives.
#
"FUNAI" "" "" 0xbe 0 0 0 64 0
"TOSHIBA" "" "" 0x28 1 0x82 0 10 0
"DEC" "" "" 0x28 1 0x82 0 10 0
"IBM" "" "" 0x28 1 0x82 0 10 0
"NEC" "" "" 0xd4 0 0x00 0 10 0
"PHILIPS" "OMNIWRITER26" "" 0xd8 0 0x00 0 10 0
"PHILIPS" "" "" 0x28 1 0x00 1 10 0
"IMS" "" "" 0x28 1 0x00 1 10 0
"KODAK" "" "" 0x28 1 0x00 1 10 0
"HP" "" "" 0x28 1 0x00 1 10 0
"PLASMON" "" "" 0x28 1 0x00 1 10 0
"GRUNDIG" "CDR100IP" "" 0x28 1 0x00 1 10 0
"MITSUMI" "CDR" "" 0x28 1 0x00 1 10 0
"SONY" "" "" 0xd8 0 0x00 0 10 0
"PLEXTOR" "" "" 0xd8 0 0x00 0 10 0
# This one was tested with "MATSHITA" "PD-1 LF-1001" "A105":
"MATSHITA" "PD-1" "" 0x28 1 0x00 0 10 0
"MATSHITA" "CD-R CW-7502" "" 0xBE 1 0x00 0 10 0
# Someone reported the following setting for his
# "YAMAHA" "CRW4260" "1.0e" and "1.0h". (Maybe it
# also works better with MATSHITA? Don't know.)
# I don't know whether this works with other YAMAHA
# drives, though, so I keep the old setting for those.
# The CRW4416 entry is known to work with
# "YAMAHA" "CRW4416S" "1.0e".
"YAMAHA" "CRW4260" "" 0xd8 0 0x00 0 10 0
"YAMAHA" "CRW4416" "" 0xd8 0 0x00 0 10 0
"YAMAHA" "" "" 0x28 1 0x00 0 10 0
"MATSHITA" "" "" 0x28 1 0x00 0 10 0
# This one was tested with the following drives:
# "TEAC" "CD-R55S" "1.0J"
# "TEAC" "CD-516S" "1.0B" and "1.0D"
"TEAC" "" "" 0xd8 0 0x00 0 10 0
# This one was tested with the following drives:
# "PIONEER" "CD-ROM DR-U10X" "1.07"
# "PIONEER" "DR-U06S" "1.05"
"PIONEER" "" "" 0xd8 0 0x00 0 10 0
# This one was tested with "RICOH" "MP6200S" "1.20":
"RICOH" "" "" 0xd8 0 0x00 0 26 0
# This one was tested with "NRC" "MBR-7" "110" (Nakamichi jukebox):
"NRC" "" "" 0xd8 0 0x00 0 10 0
# Remember that the (empty) default entry must come last!
"" "" "" 0xd8 0 0x00 0 10 0
#--