home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 2000 August
/
VPR0008B.BIN
/
DRIVER
/
MELCO
/
WLIP300
/
WLIP300.EXE
/
WINNT
/
OEMSETUP.INF
next >
Wrap
INI File
|
2000-04-18
|
54KB
|
1,887 lines
;***********************************************************************
;
; OEMSETUP.INF
;
; MELCO WLI-PCM 802.11 Network Adapter .INF file
;
;***********************************************************************
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA, MCA and PCMCIA
;-----------------------------------------------------------------------
[PlatformsSupported]
ISA
; EISA
PCI
PCMCIA
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
WLIPCM
;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************
[FileConstants]
GenericAdapterName = "MELCO WLI-PCM 802.11 Network Adapter"
GenericDriverName = "MELCO WLI-PCM 802.11 NDIS3 miniport driver"
GenericSysName = "wlipcm.sys"
GenericName = "Wlipcm"
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;
; Product Info
;
Manufacturer = "MELCO"
ProductMajorVersion = "1"
ProductMinorVersion = "43"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName = "Wlipcm"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "wlipcmSys ndisDriver wlipcmDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """wlipcmSys"" yes no container"
NetRuleSoftwareClass = {"wlipcmDriver basic"}
NetRuleSoftwareBindable = {"wlipcmDriver wlipcmAdapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "Wlipcm"
NetRuleHardwareType = "wlipcm wlipcmAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"wlipcmAdapter basic"}
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
PcmciaDataBaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\Database"
[GeneralConstants]
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 0
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
; set ActivateDetection = TRUE
set StartLabel = configureadapter
;
; You cannot config the software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the PCNet-Mobile driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
; set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; set the default values
; I/O Base Address = 0x200
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
; IRQ Level = 10
set IRQValue = *($(IRQList), 6)
; PCMCIA Attribute Memory Base Address = D1000
set MemBaseAddrValue = *($(MemBaseAddrList), 10)
set NetworkModeValue = 0
set Chk1 = "OFF"
set FHPatternValue = *($(FHPatternList), 1)
set DSChannelValue = *($(DSChannelList), 14)
set PowerManValue = *($(PowerManList), 1)
set PktSizeValue = *($(PktSizeList), 12)
set ESSIDValue = "AIRCONNECT"
set IoAccessValue = 0
set Chk2 = "OFF"
set WlipciValue = 0
set Chk3 = "OFF"
set EncapsulatedValue = 0
set Chk4 = "OFF"
set PcmciaValue = 1
set Chk5 = "ON"
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
;
; Create/recreate the Registry's PCMCIA database entry for the PCnet-Mobile.
;
set KeyPcmciaDataBase = ""
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName) $(MAXIMUM_ALLOWED) KeyPcmciaDataBase
Shell "" ExCreateRegKey $(KeyPcmciaDataBase) "AMD\Am79C930"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName)"\AMD\Am79C930" $(MAXIMUM_ALLOWED) KeyTemp
SetRegValue $(KeyTemp) {Driver,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)}
SetRegValue $(KeyTemp) {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}
CloseRegKey $(KeyTemp)
CloseRegKey $(KeyPcmciaDataBase)
;
; Check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
;
; dll load addition
;
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "NetworkMode"
set NetworkModeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Interrupt_Mode"
set WlipciValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Pcmcia"
set PcmciaValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Encapsulated"
set EncapsulatedValue = $(ValueData)
else-ifstr(i) $(ValueName) == "IoAccessMode"
set IoAccessValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Power_Management"
set PowerManIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "PktSize"
set PktSizeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Desired_ESS_ID"
set ESSIDValue = $(ValueData)
else-ifstr(i) $(ValueName) == "DS_Channel"
set DSChannelValue = $(ValueData)
else-ifstr(i) $(ValueName) == "FH_Index"
set FHIndValue = $(ValueData)
else-ifstr(i) $(ValueName) == "FH_Pattern"
set FHPatternValue = $(ValueData)
;else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set MemBaseAddrIndex = $(ValueData)
endif
EndForListDo
ifint $(NetworkModeValue) == 1
set Chk1 = "ON"
else
set Chk1 = "OFF"
endif
ifint $(IoAccessValue) == 1
set Chk2 = "ON"
else
set Chk2 = "OFF"
endif
ifint $(WlipciValue) == 1
set Chk3 = "ON"
else
set Chk3 = "OFF"
endif
ifint $(EncapsulatedValue) == 1
set Chk4 = "OFF"
else
set Chk4 = "ON"
endif
ifint $(PcmciaValue) == 1
set Chk5 = "ON"
else
set Chk5 = "OFF"
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 1)
endif
set MemBaseAddrValue = *($(MemBaseAddrList), ~($(MemBaseAddrValues),$(MemBaseAddrIndex)))
ifstr(i) $(MemBaseAddrValue) == ""
set MemBaseAddrValue = *($(MemBaseAddrList), 1)
endif
set PktSizeValue = *($(PktSizeList), ~($(PktSizeValues),$(PktSizeValue)))
ifstr(i) $(PktSizeValue) == ""
set PktSizeValue = *($(PktSizeList), 7)
endif
set FHIndValue = *($(FHIndList), ~($(FHIndValues),$(FHIndValue)))
ifstr(i) $(FHIndValue) == ""
set FHIndValue = *($(FHIndList), 1)
endif
set FHPatternValue = *($(FHPatternList), ~($(FHPatternValues),$(FHPatternValue)))
ifstr(i) $(FHPatternValue) == ""
set FHPatternValue = *($(FHPatternList), 1)
endif
set DSChannelValue = *($(DSChannelList), ~($(DSChannelValues),$(DSChannelValue)))
ifstr(i) $(DSChannelValue) == ""
set DSChannelValue = *($(DSChannelList), 1)
endif
set PowerManValue = *($(PowerManList), ~($(PowerManValues),$(PowerManIndex)))
ifstr(i) $(PowerManValue) == ""
set PowerManValue = *($(PowerManList), 1)
endif
; Save the settings as they were read from the Registry.
; Shell $(ParamInf) Param_SaveValues
; Set CurrParamSettings = $($R0)
;
; Put up the adapter configuration dialog if necessary.
;
; Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +
; Shell "" DebugConfiguration "before displaying dialog"
Set from = adapteroptions
adapteroptions = +
LoadLibrary "LAN Card Utility for WLI-PCM" $(DialogDllName) hLib
set OldIOBaseAddrValue = $(IOBaseAddrIndex)
set OldIRQValue = $(IRQValueIndex)
set OldMemBaseAddrValue = $(MemBaseAddrIndex)
configure_adapter = +
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
Debug-Output " ButtonPressed "$(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOBaseAddrIndex = $(Combo1Out)
set IRQValueIndex = $(Combo2Out)
set MemBaseAddrIndex = $(Combo3Out)
;kpdebug switch pktsize and fhind
set PktSizeValue = $(Combo4Out)
; set FHIndValue = $(Combo5Out)
; set PowerManIndex = $(Combo7Out)
set ESSIDValue = *($(EditTextOut),1)
; set DSChannelValue = $(Combo8Out)
; set FHPatternValue = $(Combo6Out)
Set Chk = *($(CheckItemsOut), 1)
Ifstr(i) $(Chk) == "ON"
Set NetworkModeValue = 1
set Chk1 = "ON"
Else
Set NetworkModeValue = 0
set Chk1 = "OFF"
Endif
Set Chk = *($(CheckItemsOut), 2)
Ifstr(i) $(Chk) == "ON"
Set IoAccessValue = 1
set Chk2 = "ON"
Else
Set IoAccessValue = 0
set Chk2 = "OFF"
Endif
Set Chk = *($(CheckItemsOut), 3)
Ifstr(i) $(Chk) == "ON"
Set WlipciValue = 1
set Chk3 = "ON"
Else
Set WlipciValue = 0
set Chk3 = "OFF"
Endif
Set Chk = *($(CheckItemsOut), 4)
Ifstr(i) $(Chk) == "ON"
Set EncapsulatedValue = 0
set Chk4 = "ON"
Else
Set EncapsulatedValue = 1
set Chk4 = "OFF"
Endif
; Set Chk = *($(CheckItemsOut), 5)
; Ifstr(i) $(Chk) == "ON"
; Set PcmciaValue = 1
; set Chk5 = "ON"
; Else
; Set PcmciaValue = 0
; set Chk5 = "OFF"
; Endif
LoadLibrary "LAN Card Utility for WLI-PCM" $(DialogDllName) hLib
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
set MemBaseAddrValue = *($(MemBaseAddrValues), ~($(MemBaseAddrList),$(MemBaseAddrIndex)))
LibraryProcedure Result $(hLib) CheckIrqUsage $(IRQValue)
Ifstr(i) $(!NTN_InstallMode) == install
ifstr(i) $(Result) == "FALSE"
read-syms IrqConflictMsgDlg ; set up the message box variables
ui start "IrqConflictMsgBox"
goto configure_adapter
endif
else
ifstr(i) $(IRQValue) != $(OldIRQValue)
ifstr(i) $(Result) == "FALSE"
read-syms IrqConflictMsgDlg ; set up the message box variables
ui start "IrqConflictMsgBox"
goto configure_adapter
endif
endif
endif
LibraryProcedure Result $(hLib) CheckIoUsage $(IOBaseAddrValue)
Ifstr(i) $(!NTN_InstallMode) == install
ifstr(i) $(Result) == "FALSE"
read-syms IoConflictMsgDlg ; set up the message box variables
ui start "IoConflictMsgBox"
goto configure_adapter
endif
else
ifstr(i) $(IOBaseAddrValue) != $(OldIOBaseAddrValue)
ifstr(i) $(Result) == "FALSE"
read-syms IoConflictMsgDlg ; set up the message box variables
ui start "IoConflictMsgBox"
goto configure_adapter
endif
endif
endif
Ifstr(i) $(!NTN_InstallMode) == install
LibraryProcedure Result $(hLib) CheckMemUsage $(MemBaseAddrValue)
else
LibraryProcedure Result $(hLib) CheckMemUsageRange $(MemBaseAddrValue) $(OldMemBaseAddrValue)
endif
ifstr(i) $(Result) == "FALSE"
read-syms MemConflictMsgDlg ; set up the message box variables
ui start "MemConflictMsgBox"
goto configure_adapter
endif
; LibraryProcedure Result $(hLib) CheckMemUsage $(MemBaseAddrValue)
; Ifstr(i) $(!NTN_InstallMode) == install
; ifstr(i) $(Result) == "FALSE"
; read-syms MemConflictMsgDlg ; set up the message box variables
; ui start "MemConflictMsgBox"
; goto configure_adapter
; endif
; else
; ifstr(i) $(MemBaseAddrValue) != $(OldMemBaseAddrValue)
; ifstr(i) $(Result) == "FALSE"
; read-syms MemConflictMsgDlg ; set up the message box variables
; ui start "MemConflictMsgBox"
; goto configure_adapter
; endif
; endif
; endif
FreeLibrary $(hLib)
set ExitButton = $(ButtonPressed)
ui pop 1
; goto nextstep
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
;
; Unknow command
;
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
Debug-Output " Combo list out "$(ComboListItemsOut)
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;
; Add Software Component
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
Set WlipcmServiceName = $($R5)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
; Add the rest of the parameters to the Services area
;
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
set MemBaseAddrValue = *($(MemBaseAddrValues), ~($(MemBaseAddrList),$(MemBaseAddrIndex)))
set PktSizeValue = *($(PktSizeValues), ~($(PktSizeList),$(PktSizeValue)))
set FHIndValue = *($(FHIndValues), ~($(FHIndList),$(FHIndValue)))
set FHPatternValue = *($(FHPatternValues), ~($(FHPatternList),$(FHPatternValue)))
set PowerManValue = *($(PowerManValues), ~($(PowerManList),$(PowerManIndex)))
set DSChannelValue = *($(DSChannelValues), ~($(DSChannelList),$(DSChannelValue)))
set NewValueList = {+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength,$(NoTitle),$(!REG_VT_DWORD),16},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemBaseAddrValue)},+
{MemoryMappedSize,$(NoTitle),$(!REG_VT_DWORD),24576},+
{Interrupt_Mode,$(NoTitle),$(!REG_VT_DWORD),$(WlipciValue)},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),$(PcmciaValue)},+
{Encapsulated,$(NoTitle),$(!REG_VT_DWORD),$(EncapsulatedValue)},+
{Power_Management,$(NoTitle),$(!REG_VT_DWORD),$(PowerManValue)},+
{PktSize,$(NoTitle),$(!REG_VT_DWORD),$(PktSizeValue)},+
{DS_Channel,$(NoTitle),$(!REG_VT_DWORD),$(DSChannelValue)},+
{FH_Index,$(NoTitle),$(!REG_VT_DWORD),$(FHIndValue)},+
{FH_Pattern,$(NoTitle),$(!REG_VT_DWORD),$(FHPatternValue)},+
{Desired_ESS_ID,$(NoTitle),$(!REG_VT_SZ),$(ESSIDValue)},+
{IoAccessMode,$(NoTitle),$(!REG_VT_DWORD),$(IoAccessValue)},+
{WinNT,$(NoTitle),$(!REG_VT_DWORD),1},+
{NetworkMode,$(NoTitle),$(!REG_VT_DWORD),$(NetworkModeValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $(WlipciValue) == 1
LoadLibrary "LAN Card Utility for WLI-PCM" $(DialogDllName) hLib
LibraryProcedure Result $(hLib) SetWlipciIrq $(IRQValue) $(WlipciValue) $(WlipcmServiceName)
Endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
; ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
; else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
; $(MAXIMUM_ALLOWED) NetworkCardKey
; Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
; GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
; set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
; OpenRegKey $(NetworkCardKey) "" "NetRules" +
; $(MAXIMUM_ALLOWED) NetRuleKey
; Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
; else
;
; Error, cannot open net rules key
;
; goto fatalregistry
; endif
; CloseRegKey $(NetRules)
; CloseRegKey $(NetworkCardKey)
; else
;
; Error, cannot open network card key
;
; goto fatalregistry
; endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
; OpenRegKey $(!REG_H_LOCAL) "" +
; $(!NTN_ServiceBase)"\"$(ServiceName) +
; $(MAXIMUM_ALLOWED) ServiceKey
; Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
; CloseRegKey $(ServiceKey)
; else
;
; Error, cannot open network card key
;
; goto fatalregistry
; endif
; endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMNADE2.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue)
Debug-Output $(InfName)" MemBaseAddrDec is "$(!p:MemBaseAddrDec)
Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue)
Debug-Output $(InfName)" PowerManValue is "$(!p:PowerManValue)
Debug-Output $(InfName)" DSChannelValue is "$(!p:DSChannelValue)
Debug-Output $(InfName)" FHIndValue is "$(!p:FHIndValue)
Debug-Output $(InfName)" FHPatternValue is "$(!p:FHPatternValue)
return
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
; the other INF files
;
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "MELCO WLI-PCM 802.11 Network Adapter"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=40558, RENAME=$(!UG_Filename)
[Files-WLIPCM]
1, wlipcm.sys, SIZE=12800
[Files-Dll]
1, wlipcm.dll , SIZE=5632
[LanguagesSupported]
ENG
[OptionsTextENG]
WLIPCM = "MELCO WLI-PCM 802.11 Network Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = $(GenericAdapterName)" Setup"
ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
DialogDllName = "wlipcm.dll"
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
MemBaseAddrList = ^(MemBaseAddrChoices, 1)
MemBaseAddrValues = ^(MemBaseAddrChoices, 2)
PktSizeList = ^(PktSizeChoices,1)
PktSizeValues = ^(PktSizeChoices,2)
FHIndList = ^(FHIndChoices,1)
FHIndValues = ^(FHIndChoices,2)
FHPatternList = ^(FHIndChoices,1)
FHPatternValues = ^(FHIndChoices,2)
DSChannelList = ^(DSChannelChoices,1)
DSChannelValues = ^(DSChannelChoices,2)
PowerManList = ^(PowerManChoices,1)
PowerManValues = ^(PowerManChoices,2)
[DialogConstantsENG]
; Help = "&Help"
; Exit = "Cancel"
; OK = "OK"
; HelpContext = ""
; Continue = "Continue"
; Cancel = "Cancel"
Help = "ヘルプ(&H)"
Exit = "キャンセル"
OK = "OK"
HelpContext = ""
Continue = "OK"
Cancel = "キャンセル"
[MemoryMappedChoicesENG]
Map_1 = 1, "ON"
Map_2 = 0, "OFF"
[FileDependentDlgENG]
DlgText = "Please select values for the follwing fields:"
DlgType = "RadioCombination"
DlgTemplate = "PCNTN3"
Caption = $(FunctionTitle)
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADE2_INS)
Combo1Label = "I/&Oポート:"
Combo2Label = "I&RQレベル:"
Combo3Label = "メモリアドレス(&M):"
Combo4Label = "パケットサイズ(&S):"
Edit1Label = "&ESS ID:"
BigButton = "More pcntn3 BS >>"
CheckBox1 = "アクセスポイント経由通信(&I)"
CheckBox2 = "&PIO Mode"
CheckBox3 = "&WLI-PCI"
CheckBox4 = "R&FC 1042"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(IRQList)
Combo2Out = $(IRQValue)
Combo3List = $(MemBaseAddrList)
Combo3Out = $(MemBaseAddrValue)
;kpdbg
Combo4List = $(PktSizeList)
Combo4Out = $(PktSizeValue)
Combo5List = $(FHIndList)
Combo5Out = $(FHIndValue)
Combo6List = $(FHPatternList)
Combo6Out = $(FHPatternValue)
Combo7List = $(PowerManList)
Combo7Out = $(PowerManValue)
Combo8List = $(DSChannelList)
Combo8Out = $(DSChannelValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out}
EditTextIn = {$(ESSIDValue)}
EditTextLim = {"32","6"}
CheckItemsIn = {$(Chk1), $(Chk2), $(Chk3), $(Chk4), $(Chk5)}
[IOBaseAddrChoices]
IOBase_1 = "200",512
IOBase_2 = "240",576
IOBase_3 = "280",640
IOBase_4 = "2C0",714
IOBase_5 = "300",768
IOBase_6 = "340",832
IOBase_7 = "380",896
IOBase_8 = "3C0",960
[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "12",12
; IRQ_9 = "15",15
[MemBaseAddrChoices]
Add_1 = "C8000",819200
Add_2 = "C9000",823296
Add_3 = "CA000",827392
Add_4 = "CB000",831488
Add_5 = "CC000",835584
Add_6 = "CD000",839680
Add_7 = "CE000",843776
Add_8 = "CF000",847872
Add_9 = "D0000",851968
Add_10 = "D1000",856064
Add_11 = "D2000",860160
Add_12 = "D3000",864256
Add_13 = "D4000",868352
Add_14 = "D5000",872448
Add_15 = "D6000",876544
Add_16 = "D7000",880640
Add_17 = "D8000",884736
Add_18 = "D9000",888832
Add_19 = "DA000",892928
Add_20 = "DB000",897024
Add_21 = "DC000",901120
Add_22 = "DD000",905216
Add_23 = "DE000",909312
Add_24 = "DF000",913408
[PktSizeChoices]
PktSize_1 = "400",400
PktSize_2 = "500",500
PktSize_3 = "600",600
PktSize_4 = "700",700
PktSize_5 = "800",800
PktSize_6 = "900",900
PktSize_7 = "1000",1000
PktSize_8 = "1100",1100
PktSize_9 = "1200",1200
PktSize_10 = "1300",1300
PktSize_11 = "1400",1400
PktSize_12 = "1500",1500
PktSize_13 = "1550",1550
[FHIndChoices]
FHInd_1 = "1",1
FHInd_2 = "2",2
FHInd_3 = "3",3
FHInd_4 = "4",4
FHInd_5 = "5",5
FHInd_6 = "6",6
FHInd_7 = "7",7
FHInd_8 = "8",8
FHInd_9 = "9",9
FHInd_10 = "10",10
FHInd_11 = "11",11
FHInd_12 = "12",12
FHInd_13 = "13",13
FHInd_14 = "14",14
FHInd_15 = "15",15
FHInd_16 = "16",16
FHInd_17 = "17",17
FHInd_18 = "18",18
FHInd_19 = "19",19
FHInd_20 = "20",20
FHInd_21 = "21",21
FHInd_22 = "22",22
FHInd_23 = "23",23
FHInd_24 = "24",24
FHInd_25 = "25",25
FHInd_26 = "26",26
FHInd_27 = "27",27
FHInd_28 = "28",28
FHInd_29 = "29",29
FHInd_30 = "30",30
FHInd_31 = "31",31
FHInd_32 = "32",32
FHInd_33 = "33",33
FHInd_34 = "34",34
FHInd_35 = "35",35
FHInd_36 = "36",36
FHInd_37 = "37",37
FHInd_38 = "38",38
FHInd_39 = "39",39
FHInd_40 = "40",40
FHInd_41 = "41",41
FHInd_42 = "42",42
FHInd_43 = "43",43
FHInd_44 = "44",44
FHInd_45 = "45",45
FHInd_46 = "46",46
FHInd_47 = "47",47
FHInd_48 = "48",48
FHInd_49 = "49",49
FHInd_50 = "50",50
FHInd_51 = "51",51
FHInd_52 = "52",52
FHInd_53 = "53",53
FHInd_54 = "54",54
FHInd_55 = "55",55
FHInd_56 = "56",56
FHInd_57 = "57",57
FHInd_58 = "58",58
FHInd_59 = "59",59
FHInd_60 = "60",60
FHInd_61 = "61",61
FHInd_62 = "62",62
FHInd_63 = "63",63
FHInd_64 = "64",64
FHInd_65 = "65",65
FHInd_66 = "66",66
FHInd_67 = "67",67
FHInd_68 = "68",68
FHInd_69 = "69",69
FHInd_70 = "70",70
FHInd_71 = "71",71
FHInd_72 = "72",72
FHInd_73 = "73",73
FHInd_74 = "74",74
FHInd_75 = "75",75
FHInd_76 = "76",76
FHInd_77 = "77",77
FHInd_78 = "78",78
FHInd_79 = "79",79
[FHPatternChoices]
FHPattern_1 = "1",1
FHPattern_2 = "2",2
FHPattern_3 = "3",3
[DSChannelChoices]
DSChannel_1 = "1",1
DSChannel_2 = "2",2
DSChannel_3 = "3",3
DSChannel_4 = "4",4
DSChannel_5 = "5",5
DSChannel_6 = "6",6
DSChannel_7 = "7",7
DSChannel_8 = "8",8
DSChannel_9 = "9",9
DSChannel_10 = "10",10
DSChannel_11= "11",11
DSChannel_12 = "12",12
DSChannel_13 = "13",13
DSChannel_14 = "14",14
[PowerManChoices]
PowerMan_1 = "disabled",0
PowerMan_2 = "enabled",1
PowerMan_3 = "auto",2
[IrqConflictMsgDlg]
DlgType = "MessageBox"
STF_MB_TITLE = "MELCO WLI-PCM Network Adapter Setup"
STF_MB_TEXT = "このIRQレベルは他のボードが使用しています。別の値を選択してください。"
STF_MB_TYPE = 1 ; OK button
STF_MB_ICON = 5 ; ! icon
STF_MB_DEF = 1 ; default button is OK
[IoConflictMsgDlg]
DlgType = "MessageBox"
STF_MB_TITLE = "MELCO WLI-PCM Network Adapter Setup"
STF_MB_TEXT = "このI/Oポートアドレスは他のボードが使用しています。別の値を選択してください。"
STF_MB_TYPE = 1 ; OK button
STF_MB_ICON = 5 ; ! icon
STF_MB_DEF = 1 ; default button is OK
[MemConflictMsgDlg]
DlgType = "MessageBox"
STF_MB_TITLE = "MELCO WLI-PCM Network Adapter Setup"
STF_MB_TEXT = "このメモリベースアドレスは他のボードが使用しています。別の値を選択してください。"
STF_MB_TYPE = 1 ; OK button
STF_MB_ICON = 5 ; ! icon
STF_MB_DEF = 1 ; default button is OK
[ExCreateRegKey]
Debug-Output "******************Entering [ExCreateRegKey]******************"
set ECR_Result = NO_ERROR
set ECR_BaseKeyHandle = $($0)
set ECR_NewPath = $($1)
set KeyNull = ""
set MAXIMUM_ALLOWED = 33554432
Debug-Output "ExCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle)
Debug-Output " ECR_NewPath = "$(ECR_NewPath)
Debug-Output " MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED)
Debug-Output " KeyNull = "$(KeyNull)
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) +
ECR_BaseKey
Debug-Output "ECR_BaseKey = "$(ECR_BaseKey)
Debug-Output " OpenRegKey returned "$($R0)
Ifstr $(ECR_BaseKey) == $(KeyNull)
Debug-Output "ECR_BaseKey == KeyNull"
Else
Debug-Output "ECR_BaseKey != KeyNull"
set ECR_KeyHandle = $(ECR_BaseKey)
goto ECR_Return
Endif
set ECR_TmpPath = ""
Split-String $(ECR_NewPath) "\" ECR_PList
Debug-Output "ECR_PList = "$(ECR_PList)
ForListDo $(ECR_PList)
Ifstr(i) $($) != "\"
Ifint $(#) == 1
set ECR_TmpPath = $($)
Else
set ECR_TmpPath = $(ECR_TmpPath)"\"$($)
Endif
Debug-Output "Determining if "$(ECR_TmpPath)" exists"
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey
Ifstr $(ECR_BaseKey) == $(KeyNull)
Debug-Output "Creating "$(ECR_TmpPath)
CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle
Ifstr(i) $(ECR_KeyHandle) == $(KeyNull)
set ECR_Result = $($R0)
goto ECR_Return
Endif
Endif
Endif
EndForListDo
ECR_Return = +
return $(ECR_Result) $(ECR_KeyHandle)