home *** CD-ROM | disk | FTP | other *** search
/ DOS/V Power Report 2000 August / VPR0008B.BIN / DRIVER / COMPAQ / SP11751 / sp11751.exe / SP11751.CVA < prev    next >
INI File  |  1999-09-27  |  4KB  |  113 lines

  1. [CVA File Information]
  2. CVA Version=0
  3. CVASyntaxVersion=1.0L
  4.  
  5. [Software Title]
  6. US=Deskpro EN/EP PCI98 Chipset Support
  7.  
  8. [US.Software Description]
  9. This software provides support for the Deskpro EN/EP PCI 810 chipset.
  10.  
  11. [General]
  12. DeliverableID=1663.6696.7811.0
  13. PN=
  14. Version=2.00
  15. Revision=A
  16. Pass=1
  17. Division=Commercial Desktops
  18. DistributionMethod=Pre Install,Restore CD,Internet,Support Software CD
  19. Type=Driver
  20. Category=Support Software and Driver Bundles
  21. Installation=Installable,SilentInstall
  22. UserMustBeLoggedIn=
  23. InstallsSystemComponents=
  24.  
  25. [DetailFileInformation]
  26. setup.exe=<ProgramFilesDir>,0x0005,0x0032,0x0089,0x0000
  27.  
  28. [SupportedLanguages]
  29. Languages=GLOBAL
  30.  
  31. [Softpaq]
  32. SoftpaqNumber=SP11751
  33. SoftpaqEffectiveDate=Sep 24, 1999
  34. SoftpaqUtilityVersion=4.0
  35. SupersededSoftpaqNumber=SP10389
  36. PackageExtraction=
  37.  
  38. [Operating Systems]
  39. WIN95=OEM
  40. WIN98=OEM
  41.  
  42. [System Information]
  43. SysID1=0x054C
  44. SysName1="Deskpro EN Series"
  45. SysID2=0x055C
  46. SysName2="Deskpro EP Series"
  47. SysID3=0x0560
  48. SysName3="Deskpro EN Series SFF"
  49. SysID4=0x061C
  50. SysName4="Deskpro EP Series"
  51. SysID5=0x0620
  52. SysName5="Deskpro EN Series SFF"
  53.  
  54. [Devices]
  55. VEN_8086&DEV_2411,VEN_8086&DEV_2412=Core Chipset
  56.  
  57. [Software Dependencies]
  58. PN=
  59. SP=
  60.  
  61. [US.Enhancements]
  62.  
  63. [US.Solutions]
  64. Sol1=Corrects a Silent mode condition that now writes the correct version number to the registry.
  65.  
  66. [US.Notes]
  67. Note1=Older revisions of the Intel(R) LANDesk(R) Software Package may cause a Device Manager warning when installed on a system after the INF Installation Utility has been executed on the system.
  68. Note2=When the INF Installation Utility is run on a system with the Windows 95 Original Release, the Device Manager may report a memory resource conflict.  This conflict involves the resources allocated to PCI cards that are located behind a PCI bridge.  The operating system incorrctly reports a member conflict, even though the memory resources in question are fully contained within the PCI bridge aperature.  This appears to be a known issue with the Windows 95 operation system.  The INF Installation Utility operation has no effect on this issue.
  69. Note3=During the Windows setup stage, the USB keyboard and mouse may not be accessible because the legacy USB driver may be inactive when Windows enters the GUI mode.  There is a small window of time during which it may not be possible for the system to accept user input.  Since the INF Installation Utility may cause prompts during the Windows setup stage, it should not be used on systems with a USB keyboard and mouse as the sole input devices.
  70. Note4=A Change Driver prompt may be displayed from Windows setup on devices with PCI Subsystem ID fields programmed to a non-zero value.
  71. Note5=This software will install the ICHxSMB.INF file on systems running Windows 98 Second Edition even though the SMBus device is natively supported by the operating system.  This is done to allow easy update of any future SMBus driver.
  72. Note6=Windows* 98 Digitial Signature Files are installed for the following INF files:
  73.  
  74. 810.INF
  75. ICHx.INF
  76. ICHxIDE.INF
  77. ICHxSMB.INF
  78. ICHxUSB.INF
  79. IFWH.INF
  80.  
  81. Addiitonal files added to release kit:
  82.  
  83. 810.CAT
  84. ICH.CAT
  85. ICHxIDE.CAT
  86. ICHxSMB.CAT
  87. ICHxUSB.CAT
  88. IFWH.CAT
  89.  
  90. [End-User Installation Instructions]
  91. Run Setup.exe
  92.  
  93. [Silent Installation Instructions]
  94. Run Setup.exe -s
  95.  
  96. [Blind Installation Instructions]
  97.  
  98.  
  99. [Uninstallation Instructions]
  100.  
  101.  
  102. [Install Execution]
  103. Install="setup.exe"
  104. SilentInstall="Setup.exe" -s
  105. BlindInstall=
  106. Uninstall=
  107. InstallRecover=
  108.  
  109. [MSBATCH Installation Instructions]
  110.  
  111.  
  112. [NTDS Installation Instructions]
  113.