home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 2000 August
/
VPR0008B.BIN
/
BIOS
/
TEKRAM
/
S381106T
/
S381106T.EXE
/
README.TXT
< prev
next >
Wrap
Text File
|
2000-02-23
|
9KB
|
218 lines
-V1.01 1st formal release of S381 BIOS
-V1.02 ( checksum = C4E4 )
* Fix CWIN98 + CDROM + CDROM driver STR and resume hangup
* Fix bootfrom IDE CDROM bug
* Fix M/ML version S381 STR
* Support PS/2 keyboard mouse swap
Known problem in this version
* "ANY KEY" power on option cannot STR or Shutdown system
* If only PS/2 mouse to be attached ( no PS/2 keyboard )
The mouse MUST be attached at K/B connector
-V1.03
* S381103G.BIN -- Graphics Post ( Checksum : 4088 )
S381103T.BIN -- Text mode post ( Checksum : 9FB8 )
* Sync with Award BIOS newer version
* Fix "ANY KEY" power on option cannot STR or Shutdown system
* Any combination of PS/2 keyboard and mouse attachment is allowed
* Fix after STR, there is noise when playing sound
Note : Due to CODEC driver, the quality of sound is changed
slightly after STR. It may be ignored.
* Remove ACPI S4 ( WIN98 Hibernation )
* Fix ICH UIP correction cause Y2K testing program hang
( Y2KEYE.EXE, AMI2000.EXE, 2000.EXE)
* Fix some dmi information
* The BIOS message display correct model name
3 M/B are supported
for I810
S381-M/M+/ML
S381-B/B+/BL
P681-A/A+/AL
for I810E
S381-ME/ME+/MEL
S381-BE/BE+/BEL
P681-AE/AE+/AEL
For TRM standard model ==>
MODBIN6 --> TRM-S381-M~~ (V1.03)
BIOS will modify the string to correct model name
* Fix Win98+windows NT dual boot+IDE cdrom driver installed
cannot shutdown and STR !!!
* Add support of ISA bus ( autodetected )
* Fix setup cursor movement bug
* Add item for S381-B to select power supply type
* Fix CPU speed displayed error when frequency control selected
* Fix after STR CPU speed changed when frequency control used
* Fix STR or SOFT power-off failed when frequency control used
( e.g. CPU host clock select 75MHz )
* Move AC97-audio init code to POST48 to enable PC BEEP during
power up
* Fix modem-ring resume from STR hang
* Auto-disable AC97-audio/modem when CPU host frequency is 75/83/
115/120/124/133 MHz. AC97 cannot work properly under these frequency.
* Change I810 VGA BIOS to V2.01
* Remove SDRAM CAS latency suggestion
* Fix BIOS setup hang when unused key pressed
NOTE FOR FREQUENCY CONTROL :
1. CPU host clock control
If you experience system hang BEFORE you can enter BIOS setup
when you over-clocking the CPU host/PCI clock, power off system,
then power-on the system, press INS key QUICKLY until system
show up, press DEL key to enter BIOS setup to correct the
frequency control setting!
2. CPU clock multiplier ratio
If too large ratio is selected and system cannot start. ( Maybe
cannot go into BIOS setup ) The ONLY method to get out of this
situation is to CLEAR CMOS.
* Add support for I810E with 133MHz support
P681-A ID code 01 ( ID code is GPIO value used by BIOS )
S381-B ID code 10
S381-M ID code 00
Use ICS9248-96 clock chip ( with 133 support )
S381-M ID code 11
Use ICS9248-78 clock chip ( no 133 support )
* Reduce the possibility of system hang and clear CMOS required when
CPU is changed
* I810 VGA BIOS is updated to V2.10
* Fix spread spectrum item ( only disable/enable(0.25%), no 0.5% item )
* Add ADI AC97 subsystem ID
* Set Hub Link 32 clock retry to enable
* Set I810 VGA subsystem ID
* GateA20 default to be FAST
********************************
Temporary note for customer file
Cas latency warning is removed
********************************
S381_3BG.BIN Graphics post
S381_3BT.BIN Text post
-V1.04
* Fix HCT9.1 PnPBIOS test
* Hide USB wake from S3 item if S381-B and AT power used
* Fix HDD+CDROM at 1 channel may hang
* Fix APM mode standby hang if USB keyboard used
* Remove USB keyboard wakeup from S3 item for S381-M PCB <= 2.0
* Fix Drive A access hang in Win98 when NO floppy installed
* Set "Return No FDD for win95/98" item to YES by default
* Add below 1M memory PCI controller support
* (Press TAB and DEL message is removed by default for Graphics Post)
S381104T.BIN -- Standard BIOS - Text POST (V1.04) sum=3364
S381104G.BIN -- Standard BIOS - Graphics POST (V1.04) sum=1CBC
S381104I.BIN -- For Proview W/ Logo (V1.04i1) sum=610E
S381104J.BIN -- For Proview W/O Logo (V1.04i2) sum=DDBF
WM810104.BIN -- For WinMax sum=EEC9
-V1.05
S381105T.BIN -- Tekram text mode post -- checksum = 52EA
S381105G.BIN -- Tekram graphics post for OEM -- checksum = AF01
WM810105.BIN -- WinMax OEM BIOS -- checksum = 65F5
S381105H.BIN -- Graphics Post For OEM
S381105I.BIN -- Special version prior V1.06 with V1.06 fix for OEM ( Text )
S381105J.BIN -- Special version prior V1.06 with V1.06 fix for OEM ( Graphics )
S381105B.BIN -- Fix S381-B AT power check for Win-95/98 shutdown -- sum = 6714
* Model name change : AE+ --> Ae+ ( All model 'E' --> 'e' )
* Update I810 VGA BIOS to V2.51
* Add 1 SDRAM CAS latency item -- AUTO
* Update CPU micro-code
* Add TSC subsystem ID
* Add GMCH subsystem ID
* Add Audio Codec subsystem ID
* Fix RCOMP register to improve reliability & pass Intel testing
* Fix CPU fan RPM error when RPM < 4000
* Add S381-F/F+/Fe+ support ( Flex-ATX )
* Fix SCO open server 5 installation keyboard hang when PS/2 mouse
installed.
( Do not enable PS/2 mouse during BIOS post )
* Add support for Cyrix Joshua processor
SUBSYS_VENDOR_ID = 1DE1h
TSC SUBSYS_DEVICE_ID =
P681-A/A+/AL/Ae+ 6810/6814/6818/681C
S381-M/M+/ML/Me+ 3810/3814/3818/381C
S381-B/B+/BL/Be+ 3820/3824/3828/382C
S381-F/F+/FL/Fe+ 3830/3834/3838/383C
GMCH SUBSYS_DEVICE_ID = TSC SUBSYS_DEVICE_ID + 1
P681-A/A+/AL/Ae+ 6811/6815/6819/681D
S381-M/M+/ML/Me+ 3811/3815/3819/381D
S381-B/B+/BL/Be+ 3821/3825/3829/382D
S381-F/F+/FL/Fe+ 3831/3835/3839/383D
AC97 AUDIO SUBSYS_DEVICE_ID = TSC SUBSYS_DEVICE_ID + 2
P681-A/A+/AL/Ae+ 6812/6816/681A/681E
S381-M/M+/ML/Me+ 3812/3816/381A/381E
S381-B/B+/BL/Be+ 3822/3826/382A/382E
S381-F/F+/FL/Fe+ 3832/3836/383A/383E
-V1.06
==> Re-organize this directory
STANDARD.TXT -- BIOS with text mode post
STANDARD.GFX -- BIOS with graphics mode post
WINMAX -- WINMAX OEM BIOS
PROVIEW -- Proview OEM BIOS
TEST -- BIOS under testing and not released yet
HISENE -- Hisene OEM BIOS
HISENE\381105DG.BIN -- Fix PS/2 mouse missing in Windows2000 when USB keyboard
and PS/2 mouse are used ( Always report PS/2 keyboard
flag when PS/2 mouse exist
HISENE\381105DT.BIN -- Same as 381105DG.BIN, except POST in TEXT mode
STANDARD.TXT\S381106T.BIN Text Post, CheckSum = D8CE
STANDARD.GFX\S381106G.BIN GFX Post, CheckSum = 029C
* Support SCSI Controller Suspend To RAM
* Force 24873 clock chip and 100MHz external clock CPU to default
to 100MHZ external clock ( Not 101MHz )
* Fix AT power for S381-B shutdown failed
* Fix when RTC resume enabled, system cannot suspend
* Fix Lan boot option - if no LAN boot selected in all boot sequence
==> No LAN boot will be executed
* Fix boot from SCSI and win98 shutdown to DOS failed
* Add combined LAN bootROM selection ( PXE2.0 / PXE0.99 )
* Update CPU micro-code
* VGA BIOS -- V3.00
* S381-F/F+/Fe+ with Network chip will be displayed as S381-FN/FN+/FNe+
* Change KEYBOARD 98 support
KEYBOARD 98 --> KB98 Wake Button -- Use Wake button to power up
(Add 1 item)--> KB98 Power Button -- Use Power button to power up
Label of KEYBOARD 98 ACPI button are confusion
1. Power Off/Sleep/Wake -- You may select wake button to power on
2. Power/Sleep/Wake -- You may select power button to power on
* Add JOSHUA support
* Fix PS/2 mouse missing during installation of WIN2000 if USBkey+PS/2
mouse --> Always report PS/2 keyboard exist if PS/2 mouse is plugged
* Autodetect -5V input and disable the item if the -5V input is missing
* Add legacy mouse emulation for USB mouse
* Add BOOT-MENU to select boot device before boot process. User do not
need to enter BIOS utility to select boot from CD/Floppy ...
Change 1st boot default to be HDD-0
2nd boot default to be CD-ROM
If you like to boot from floppy/CDROM, press ESC before boot ....
* Quick Post is the default
* When ON-Now function is set to POWER-ON by KB password and password is
set, BIOS set the default password to be "AWARD"
* If UDMA33 cable is used, UDMA66 and UDMA33 device are mixed on one
cable, BIOS may detect the wrong cable configuration and use the
UDMA66 speed. Add a item "Slow Down UDMA Mode" to fix this problem.
User can ENABLE this item to force a UDMA66 device to be UDMA33 speed.
* Win2000 build 2183 has problem with USBkeyboard + PS/2 mouse and STR
build 2195 W/O problem
* Add CPU micro-code CPUID = 0683