home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 2000 March
/
VPR0003B.ISO
/
support
/
usprndrv
/
alpha
/
fs-5800c.ppd
< prev
next >
Wrap
PostScript Printer Description
|
1999-10-14
|
31KB
|
871 lines
*PPD-Adobe: "4.3"
*%=============================================================================
*%
*% PPD file for FS-5800C (European English)
*%
*% Copyright (C) 1993-1999 Kyocera Technology Development Inc.
*% All Rights Reserved
*%
*% Permission is granted for redistribution of this file as long as this
*% copyright notice is intact and the contents of the file are not altered
*% in any way from their original form.
*%
*% Contents of this file are automatically generated with the PPDGEN utility
*%
*%=============================================================================
*FileVersion: "1.5.2"
*FormatVersion: "4.3"
*LanguageEncoding: ISOLatin1
*LanguageVersion: English
*Product: "(FS-5800C)"
*PSVersion: "(2014.108) 1"
*Manufacturer: "Kyocera"
*ModelName: "Kyocera FS-5800C (KPDL-2)"
*ShortNickName: "Kyocera FS-5800C (KPDL-2)"
*NickName: "Kyocera FS-5800C (KPDL-2)"
*PCFileName: "FS-5800C.PPD"
*% Basic Device Capabilities
*LanguageLevel: "2"
*ColorDevice: True
*DefaultColorSpace: CMYK
*AccurateScreensSupport: True
*TTRasterizer: Type42
*?TTRasterizer: "
save
42 /FontType resourcestatus
{ pop pop (Type42) }{ pop pop (None) } ifelse = flush
restore"
*End
*FreeVM: "5568000"
*Throughput: "4"
*% Extensions
*FileSystem: True
*?FileSystem: "
save false
(%disk%)
{ currentdevparams dup /Writeable known
{ /Writeable get { pop true } if }{ pop } ifelse
} 100 string /IODevice resourceforall
{ (True)}{(False)} ifelse = flush
restore"
*End
*% System Management
*SuggestedJobTimeout: "0"
*SuggestedManualFeedTimeout: "0"
*SuggestedWaitTimeout: "120"
*PrintPSErrors: True
*Password: "0"
*ExitServer: " count 0 eq { true }
{ dup statusdict /checkpassword get exec not } ifelse
{ (WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush quit } if
serverdict /exitserver get exec"
*End
*Reset: " count 0 eq { true }
{ dup statusdict /checkpassword get exec not } ifelse
{ (WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush quit } if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush"
*End
*% Protocols
*Protocols: BCP PJL TBCP
*1284Modes Parallel: Compat Nibble ECP
*1284DeviceID: "MFG:Kyocera:Model:Kyocera FS-5800C;COMMAND SET: POSTSCRIPT,PJL,PCL"
*% JCL Information
*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
*JCLToPSInterpreter: "@PJL ENTER LANGUAGE=POSTSCRIPT<0A>"
*JCLEnd: "<1B>%-12345X@PJL EOJ<0A><1B>%-12345X"
*JCLOpenUI *JCLEconomode/EcoPrint: PickOne
*DefaultJCLEconomode: Off
*OrderDependency: 5 JCLSetup *JCLEconomode
*JCLEconomode Off/Off: "@PJL SET ECONOMODE=OFF<0A>"
*JCLEconomode On/On: "@PJL SET ECONOMODE=ON<0A>"
*JCLCloseUI: *JCLEconomode
*% Installable Options
*OpenGroup: InstallableOptions/Installed Options
*% PF-80 Paper Feeder
*OpenUI *Opt14/PF-80 Paper Feeder: Boolean
*DefaultOpt14: False
*Opt14 False/Not Installed: ""
*Opt14 True/Installed: ""
*?Opt14: "
save
currentpagedevice /InputAttributes get
1 get null ne {(True)} {(False)} ifelse = flush
restore"
*End
*CloseUI: *Opt14
*% Hard Disk Drive
*OpenUI *Opt18/Hard Disk Drive: Boolean
*DefaultOpt18: False
*Opt18 False/Not Installed: ""
*Opt18 True/Installed: ""
*?Opt18: " save
false
(%disk?%)
{ currentdevparams dup /Writeable known
{ /Writeable get {pop true} if }{ pop } ifelse
} 100 string /IODevice resourceforall
{(True)}{(False)} ifelse = flush
restore"
*End
*CloseUI: *Opt18
*% Installed Memory
*OpenUI *InstalledMemory/Memory: PickOne
*DefaultInstalledMemory: 8MB
*InstalledMemory 8MB/Standard: ""
*InstalledMemory 12MB/4MB Upgrade: ""
*InstalledMemory 16MB/8MB Upgrade: ""
*InstalledMemory 20MB/12MB Upgrade: ""
*InstalledMemory 24MB/16MB Upgrade: ""
*InstalledMemory 28MB/20MB Upgrade: ""
*InstalledMemory 32MB/24MB Upgrade: ""
*InstalledMemory 40MB/32MB Upgrade: ""
*InstalledMemory 44MB/36MB Upgrade: ""
*InstalledMemory 48MB/40MB Upgrade: ""
*InstalledMemory 56MB/48MB Upgrade: ""
*InstalledMemory 68MB/60MB Upgrade: ""
*InstalledMemory 72MB/64MB Upgrade: ""
*?InstalledMemory: "
save
currentsystemparams /RamSize get
524288 div ceiling cvi 2 div cvi
/vmsize 20 string def
vmsize cvs print (MB) print (\n) print flush
restore"
*End
*CloseUI: *InstalledMemory
*CloseGroup: InstallableOptions
*% Virtual Memory
*VMOption 8MB: "5568000"
*VMOption 12MB: "8928000"
*VMOption 16MB: "12288000"
*VMOption 20MB: "15648000"
*VMOption 24MB: "19008000"
*VMOption 28MB: "22368000"
*VMOption 32MB: "25728000"
*VMOption 40MB: "32448000"
*VMOption 44MB: "35808000"
*VMOption 48MB: "39168000"
*VMOption 56MB: "45888000"
*VMOption 68MB: "55968000"
*VMOption 72MB: "59328000"
*% Constraints
*% ===========
*UIConstraints: *Opt14 False *InputSlot PF80A
*UIConstraints: *Opt14 False *InputSlot PF80B
*UIConstraints: *Opt18 False *KCCollate Temp
*UIConstraints: *Opt18 False *KCCollate Perm
*UIConstraints: *KCCollate None *KCBarcodeMode First
*UIConstraints: *KCCollate None *KCBarcodeMode All
*UIConstraints: *PageSize Executive *InputSlot Internal
*UIConstraints: *PageRegion Executive *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize Executive
*UIConstraints: *InputSlot Internal *PageRegion Executive
*UIConstraints: *PageSize B5 *InputSlot Internal
*UIConstraints: *PageRegion B5 *InputSlot Internal
*UIConstraints: *InputSlot Internal *PageSize B5
*UIConstraints: *InputSlot Internal *PageRegion B5
*UIConstraints: *PageSize Executive *InputSlot PF80A
*UIConstraints: *PageRegion Executive *InputSlot PF80A
*UIConstraints: *InputSlot PF80A *PageSize Executive
*UIConstraints: *InputSlot PF80A *PageRegion Executive
*UIConstraints: *PageSize B5 *InputSlot PF80A
*UIConstraints: *PageRegion B5 *InputSlot PF80A
*UIConstraints: *InputSlot PF80A *PageSize B5
*UIConstraints: *InputSlot PF80A *PageRegion B5
*UIConstraints: *PageSize Executive *InputSlot PF80B
*UIConstraints: *PageRegion Executive *InputSlot PF80B
*UIConstraints: *InputSlot PF80B *PageSize Executive
*UIConstraints: *InputSlot PF80B *PageRegion Executive
*UIConstraints: *PageSize B5 *InputSlot PF80B
*UIConstraints: *PageRegion B5 *InputSlot PF80B
*UIConstraints: *InputSlot PF80B *PageSize B5
*UIConstraints: *InputSlot PF80B *PageRegion B5
*UIConstraints: *ColorModel Gray *KCColorMatch Automatic
*UIConstraints: *KCColorMatch Automatic *ColorModel Gray
*UIConstraints: *ColorModel Gray *KCColorMatch VividColor
*UIConstraints: *KCColorMatch VividColor *ColorModel Gray
*UIConstraints: *ColorModel Gray *KCColorMatch Display
*UIConstraints: *KCColorMatch Display *ColorModel Gray
*UIConstraints: *ColorModel Quick *Resolution 1200dpi
*UIConstraints: *Resolution 1200dpi *ColorModel Quick
*UIConstraints: *ColorModel Quick *KCColorMatch Automatic
*UIConstraints: *KCColorMatch Automatic *ColorModel Quick
*UIConstraints: *ColorModel Quick *KCColorMatch Display
*UIConstraints: *KCColorMatch Display *ColorModel Quick
*% Resolution
*OpenUI *Resolution/Resolution: PickOne
*OrderDependency: 10 AnySetup *Resolution
*DefaultResolution: 600dpi
*Resolution 600dpi/600 Dots per Inch (dpi): "<< /HWResolution [600 600] >> setpagedevice"
*Resolution 1200dpi/1200 Dots per Inch (dpi): "<< /HWResolution [1200 1200] >> setpagedevice"
*?Resolution: "
save
currentpagedevice /HWResolution get
0 get ( ) cvs print (dpi) = flush
restore
"
*End
*CloseUI: *Resolution
*% Image Refinement
*OpenUI *Smoothing/Kyocera Image Refinement: PickOne
*OrderDependency: 50 AnySetup *Smoothing
*DefaultSmoothing: Medium
*Smoothing None/Off: "0 statusdict /setdoret get exec"
*Smoothing Light/Light: "1 statusdict /setdoret get exec"
*Smoothing Medium/Medium: "2 statusdict /setdoret get exec"
*Smoothing Dark/Dark: "3 statusdict /setdoret get exec"
*?Smoothing: "save
[(None)(Light)(Medium)(Dark)]
statusdict /doret get exec {get} stopped
{pop pop (Unknown) } if
= flush restore
"
*End
*CloseUI: *Smoothing
*% Color Model
*OpenUI *ColorModel/Color Mode: PickOne
*OrderDependency: 10 AnySetup *ColorModel
*DefaultColorModel: Color
*ColorModel Color/Process Color (CMYK): "<< /ProcessColorModel /DeviceCMYK >> setpagedevice"
*ColorModel Quick/Quick Color (CMY): "<< /ProcessColorModel /DeviceCMY >> setpagedevice"
*ColorModel Gray/Monochrome: "<< /ProcessColorModel /DeviceGray >> setpagedevice"
*?ColorModel: "
save currentpagedevice /ProcessColorModel get
1 {
dup /DeviceGray eq { pop (Gray) exit } if
dup /DeviceCMYK eq { pop (Color) exit } if
dup /DeviceCMY eq { pop (Quick) exit } if
pop (Unknown)
} repeat
= flush
restore"
*End
*CloseUI: *ColorModel
*% Color Matching
*OpenUI *KCColorMatch/Color Matching: PickOne
*OrderDependency: 15 AnySetup *KCColorMatch
*DefaultKCColorMatch: None
*KCColorMatch NoAdjust/None: "
currentpagedevice /ProcessColorModel get
1 {
dup /DeviceGray eq
{ << /DeviceRenderingInfo
<< /Type 2 /RenderingMethod 1 /VirtualColorDevice
<< /Type 1 /ColorTransform /Gray >>
>>
>> setpagedevice
} if
dup /DeviceCMYK eq
{ << /DeviceRenderingInfo
<< /Type 2 /RenderingMethod 1 /VirtualColorDevice
<< /Type 3 /ColorTransform /None >>
>>
>> setpagedevice
} if
dup /DeviceCMY eq
{ << /DeviceRenderingInfo
<< /Type 2 /RenderingMethod 1 /VirtualColorDevice
<< /Type 1 /ColorTransform /CMYK >>
>>
>> setpagedevice
} if
} repeat"
*End
*KCColorMatch VividColor/Vivid Color: "
<< /DeviceRenderingInfo
<< /Type 2 /RenderingMethod 1 /VirtualColorDevice
<< /Type 3 /ColorTransform /Vivid >>
>>
>> setpagedevice"
*End
*KCColorMatch Display/Simulate Display: "
<< /DeviceRenderingInfo
<< /Type 2 /RenderingMethod 1 /VirtualColorDevice
<< /Type 3 /ColorTransform /Display >>
>>
>> setpagedevice"
*End
*KCColorMatch Automatic/Auto: "
<< /DeviceRenderingInfo
<< /Type 2 /RenderingMethod 1 /VirtualColorDevice
<< /Type 3 /ColorTransform /Automatic >>
>>
>> setpagedevice"
*End
*?KCColorMatch: "
{ currentpagedevice /DeviceRenderingInfo get
/VirtualColorDevice get
dup null eq
{ pop (NoAdjust) }
{ /ColorTransform get
<<
/Automatic (Automatic)
/Vivid (VividColor)
/Display (Display)
/Gray (NoAdjust)
/CMYK (NoAdjust)
/None (NoAdjust)
>>
exch get
} ifelse
} stopped
{ % Error in PostScript Code Execution
pop pop (Unknown)
} if
= flush"
*End
*CloseUI: *KCColorMatch
*% Color Rendering Dictionary
*ColorRenderDict Absolute.none.DefaultHalftone/Absolute Colorimetric: "/AbsoluteColorimetric.none.DefaultHalftone /ColorRendering findresource setcolorrendering"
*End
*ColorRenderDict Relative.none.DefaultHalftone/Relative Colorimetric: "/RelativeColorimetric.none.DefaultHalftone /ColorRendering findresource setcolorrendering"
*End
*ColorRenderDict Saturation.none.DefaultHalftone/Saturation: "/Saturation.none.DefaultHalftone /ColorRendering findresource setcolorrendering"
*End
*ColorRenderDict Perceptual.none.DefaultHalftone/Perceptual: "/Perceptual.none.DefaultHalftone /ColorRendering findresource setcolorrendering"
*End
*RenderingIntent: AbsoluteColormetric"
*RenderingIntent: RelativeColormetric"
*RenderingIntent: Saturation"
*RenderingIntent: Perceptual"
*% Halftone Information
*DefaultHalftoneType: 5
*ScreenFreq: "85.71"
*ScreenAngle: "45.0"
*ResScreenFreq 1200dpi: "85.71"
*ResScreenAngle 1200dpi: "45.0"
*ResScreenFreq 600dpi: "60.0"
*ResScreenAngle 600dpi: "45.0"
*DefaultScreenProc: Ellipse
*ScreenProc Dot: "
{abs exch abs 2 copy add 1 gt
{1 sub dup mul exch 1 sub dup mul add 1 sub}
{dup mul exch dup mul add 1 exch sub} ifelse}"
*End
*ScreenProc Line: "
{pop}"
*End
*ScreenProc Ellipse: "
{dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub}"
*End
*DefaultTransfer: Null
*Transfer Null: "{}"
*Transfer Null.Inverse: "{1 exch sub}"
*% Paper Handling
*% Page Size Definitions
*OpenUI *PageSize: PickOne
*OrderDependency: 40 AnySetup *PageSize
*DefaultPageSize: A4
*PageSize A4/A4: "
<< /Policies << /PageSize 2 >> /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*End
*PageSize B5/B5 (JIS): "
<< /Policies << /PageSize 2 >> /PageSize [516 729] /ImagingBBox null >> setpagedevice"
*End
*PageSize Letter/Letter: "
<< /Policies << /PageSize 2 >> /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*End
*PageSize Legal/Legal: "
<< /Policies << /PageSize 2 >> /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*End
*PageSize Executive/Executive: "
<< /Policies << /PageSize 2 >> /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*End
*?PageSize: "
save
currentpagedevice /PageSize get aload pop
2 copy gt {exch} if
(Unknown)
5 dict
dup [595 842] (A4) put
dup [516 729] (B5) put
dup [612 792] (Letter) put
dup [612 1008] (Legal) put
dup [522 756] (Executive) put
{ exch aload pop 4 index sub abs 5 le exch
5 index sub abs 5 le and
{exch pop exit} {pop} ifelse
} bind forall
= flush pop pop
restore
"
*End
*CloseUI: *PageSize
*% Page Region Definitions for Frame Buffer
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: A4
*PageRegion A4/A4: "
<< /Policies << /PageSize 7 >> /PageSize [595 842] /ImagingBBox null >> setpagedevice"
*End
*PageRegion B5/B5 (JIS): "
<< /Policies << /PageSize 7 >> /PageSize [516 729] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Letter/Letter: "
<< /Policies << /PageSize 7 >> /PageSize [612 792] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Legal/Legal: "
<< /Policies << /PageSize 7 >> /PageSize [612 1008] /ImagingBBox null >> setpagedevice"
*End
*PageRegion Executive/Executive: "
<< /Policies << /PageSize 7 >> /PageSize [522 756] /ImagingBBox null >> setpagedevice"
*End
*CloseUI: *PageRegion
*% Imageable Area Definitions
*DefaultImageableArea: A4
*ImageableArea A4/A4: "12 10 583 832"
*ImageableArea B5/B5 (JIS): "21 10 495 719"
*ImageableArea Letter/Letter: "12 8 600 784"
*ImageableArea Legal/Legal: "12 8 600 1000"
*ImageableArea Executive/Executive: "12 8 510 748"
*?ImageableArea: " save
/cvp { cvi ( ) cvs
print ( ) print } bind def
newpath clippath pathbbox
4 -2 roll exch 2 {ceiling cvp} repeat
exch 2 {floor cvp} repeat ( ) = flush
restore"
*End
*% Physical Dimensions of Media
*DefaultPaperDimension: A4
*PaperDimension A4/A4: "595 842"
*PaperDimension B5/B5 (JIS): "516 729"
*PaperDimension Letter/Letter: "612 792"
*PaperDimension Legal/Legal: "612 1008"
*PaperDimension Executive/Executive: "522 756"
*%=== Custom Page Size Definitions
*%=== Input Slot Definitions
*OpenUI *InputSlot: PickOne
*OrderDependency: 30 AnySetup *InputSlot
*DefaultInputSlot: Internal
*InputSlot Internal/Cassette 1 (Internal): "
<< /ManualFeed false >> setpagedevice
statusdict begin 0 setpapertray end"
*End
*InputSlot PF80A/Cassette 2 (PF-80): "
<< /ManualFeed false >> setpagedevice
statusdict begin 1 setpapertray end"
*End
*InputSlot PF80B/Cassette 3 (PF-80): "
<< /ManualFeed false >> setpagedevice
statusdict begin 5 setpapertray end"
*End
*InputSlot MF1/Multi-Purpose Feeder: "
<< /ManualFeed false >> setpagedevice
statusdict begin 4 setpapertray end"
*End
*InputSlot MF/Manual Feed: "<< /ManualFeed true >> setpagedevice"
*InputSlot Plain/Plain Paper: "
<< /ManualFeed false /MediaType (Plain) /DeferredMediaSelection true >> setpagedevice"
*End
*InputSlot Transparency/Transparency: "
<< /ManualFeed false /MediaType (Transparency) /DeferredMediaSelection true >> setpagedevice"
*End
*InputSlot Labels/Label Paper: "
<< /ManualFeed false /MediaType (Labels) /DeferredMediaSelection true >> setpagedevice"
*End
*?InputSlot: "
"
*End
*CloseUI: *InputSlot
*RequiresPageRegion All: True
*% Output Bin Definitions
*OpenUI *OutputBin/Output Bin: PickOne
*OrderDependency: 51 AnySetup *OutputBin
*DefaultOutputBin: FDSide
*OutputBin FDSide/Side Tray (Face-Down): "0 statusdict /setoutputtray get exec"
*OutputBin FUSide/Side Tray (Face-Up): "1 statusdict /setoutputtray get exec"
*?OutputBin: "
"
*End
*CloseUI: *OutputBin
*% Page Stack Order
*PageStackOrder FDSide: Reverse
*PageStackOrder FUSide: Normal
*% Job Spooling Definitions
*OpenUI *KCCollate/Job Spooling: PickOne
*OrderDependency: 20 AnySetup *KCCollate
*DefaultKCCollate: None
*KCCollate None/None: "<< /Collate false >> setpagedevice"
*KCCollate Temp/Temporary: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /Mode 1 put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCCollate Perm/Permanent: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /Mode 2 put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*?KCCollate:"
save currentpagedevice /Collate get
{(None)}
{/CollateDetails get /Mode get
1 {
dup 1 eq { pop (Temp) exit } if
dup 2 eq { pop (Perm) exit } if
pop (Unknown)
} repeat
= flush
restore"
*End
*CloseUI: *KCCollate
*% Barcode Mode Definitions
*OpenUI *KCBarcodeMode/Barcode: PickOne
*OrderDependency: 21 AnySetup *KCBarcodeMode
*DefaultKCBarcodeMode: None
*KCBarcodeMode None/None: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /Barcode 2 put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodeMode First/First Page: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /Barcode 0 put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodeMode All/All Pages: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /Barcode 1 put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*?KCBarcodeMode: "
save currentpagedevice /CollateDetails get /Barcode get
1 {
dup 2 eq { pop (None) exit } if
dup 0 eq { pop (First) exit } if
dup 1 eq { pop (All) exit } if
pop (Unknown)
} repeat
= flush
restore"
*End
*CloseUI: *KCBarcodeMode
*% Barcode ID Definitions
*OpenUI *KCBarcodeID/Barcode ID: Boolean
*OrderDependency: 23 AnySetup *KCBarcodeID
*DefaultKCBarcodeID: False
*KCBarcodeID True/On: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 or put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodeID False/Off: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 not put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*?KCBarcodeID: " save
currentpagedevice /CollateDetails get /BarcodePosition get 128 gt
{(False)}{(True)} ifelse = flush
restore"
*End
*CloseUI: *KCBarcodeID
*% Barcode Position Definitions
*OpenUI *KCBarcodePos/Barcode Position: PickOne
*OrderDependency: 22 AnySetup *KCBarcodePos
*DefaultKCBarcodePos: ULB
*KCBarcodePos ULB/Upper Left: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 and 4 or put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodePos URB/Upper Right: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 and 3 or put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodePos LLB/Lower Left: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 and 7 or put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodePos LRB/Lower Right: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 and put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodePos ULVB/Upper Left Vertical: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 and 5 or put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodePos URVB/Upper Right Vertical: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 and 2 or put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodePos LLVB/Lower Left Vertical: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 and 6 or put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*KCBarcodePos LRVB/Lower Right Vertical: "
userdict /UICollateDetails known not
{ userdict /UICollateDetails 10 dict put } if
userdict /UICollateDetails get /BarcodePosition 2 copy known { 2 copy get }
{ currentpagedevice /CollateDetails get /BarcodePosition get } ifelse 128 and 1 or put
<< /Collate true /CollateDetails UICollateDetails >> setpagedevice"
*End
*?KCBarcodePos:"
save currentpagedevice /CollateDetails get /BarcodePosition get
1 {
dup 4 eq { pop (ULB) exit } if
dup 3 eq { pop (URB) exit } if
dup 7 eq { pop (LLB) exit } if
dup 0 eq { pop (LRB) exit } if
dup 5 eq { pop (ULVB) exit } if
dup 2 eq { pop (URVB) exit } if
dup 6 eq { pop (LLVB) exit } if
dup 1 eq { pop (LRVB) exit } if
pop (Unknown)
} repeat
= flush
restore"
*End
*CloseUI: *KCBarcodePos
*% Tray Switch Definitions
*OpenUI *TraySwitch/Auto Tray Switch: PickOne
*OrderDependency: 25 AnySetup *TraySwitch
*DefaultTraySwitch: None
*TraySwitch None/Printer Default: ""
*TraySwitch On/On: "<< /TraySwitch true >> setpagedevice"
*TraySwitch Off/Off: "<< /TraySwitch false >> setpagedevice"
*?TraySwitch: " save
currentpagedevice /TraySwitch get
{(On)}{(Off)} ifelse = flush
restore"
*End
*CloseUI: *TraySwitch
*% PPD Version Info
*OpenUI *KCVersion/PPD Version: PickOne
*OrderDependency: 25 AnySetup *KCVersion
*DefaultKCVersion: Default
*KCVersion Default/1.5.2: ""
*CloseUI: *KCVersion
*% Font Information
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
*Font Bookman-Light: Standard "(001.004S)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM
*Font Bookman-Demi: Standard "(001.004S)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM
*Font Courier: Standard "(002.004S)" Standard ROM
*Font Courier-Oblique: Standard "(002.004S)" Standard ROM
*Font Courier-Bold: Standard "(002.004S)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
*Font Helvetica: Standard "(001.006S)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
*Font Palatino-Roman: Standard "(001.005S)" Standard ROM
*Font Palatino-Italic: Standard "(001.005S)" Standard ROM
*Font Palatino-Bold: Standard "(001.005S)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
*Font Symbol: Special "(001.007S)" Special ROM
*Font Times-Roman: Standard "(001.007S)" Standard ROM
*Font Times-Italic: Standard "(001.007S)" Standard ROM
*Font Times-Bold: Standard "(001.007S)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
*Font ZapfDingbats: Special "(001.004S)" Special ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
{ count 1 gt
{ exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{ (Yes) } { (No) } ifelse =
} { exit } ifelse
} bind loop
(*) = flush
restore"
*End
*?FontList: "save
save
FontDirectory { pop == } bind forall flush (*) = flush
restore"
*End
*% Printer Messages
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "warming up"/warming up
*Status: "idle"/idle
*Status: "busy"/busy
*Status: "waiting"/waiting
*Status: "printing"/printing
*Status: "initializing"/initializing
*Status: "printing test page"/printing test page
*% Printer Error (format: %%[ PrinterError: <one of these> ]%% )
*PrinterError: "paper entry misfeed"
*PrinterError: "cover open"
*PrinterError: "no paper tray"
*PrinterError: "out of paper"
*PrinterError: "toner low (halt)"
*PrinterError: "warming up"
*PrinterError: "other reason"
*PrinterError: "video interface mode"
*PrinterError: "offline"
*PrinterError: "toner low (warning)"
*% Input Sources (format: %%[ status: <stat>;source:<one of these> ]%% )
*Source: "serial 25"
*Source: "parallel"
*Source: "AppleTalk"
*Source: "option"
*% Color Separation Information
*DefaultColorSep: ProcessBlack.106lpi.600dpi/106 lpi / 600 dpi
*% 85 lpi/600 dpi
*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"
*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
{2 {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch } repeat
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub } ifelse }"
*End
*% 106 lpi/600 dpi
*ColorSepScreenAngle ProcessBlack.106lpi.600dpi/106 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.106lpi.600dpi/106 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.106lpi.600dpi/106 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.106lpi.600dpi/106 lpi / 600 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.106lpi.600dpi/106 lpi / 600 dpi: "106.066"
*ColorSepScreenFreq ProcessCyan.106lpi.600dpi/106 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.106lpi.600dpi/106 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.106lpi.600dpi/106 lpi / 600 dpi: "100.0"
*ColorSepScreenProc ProcessYellow.106lpi.600dpi/106 lpi / 600 dpi: "
{2 {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch } repeat
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub } ifelse }"
*End
*% 90 lpi/1200 dpi
*ColorSepScreenAngle ProcessBlack.90lpi.1200dpi/90 lpi / 1200 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.90lpi.1200dpi/90 lpi / 1200 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.90lpi.1200dpi/90 lpi / 1200 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.90lpi.1200dpi/90 lpi / 1200 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.90lpi.1200dpi/90 lpi / 1200 dpi: "84.852"
*ColorSepScreenFreq ProcessCyan.90lpi.1200dpi/90 lpi / 1200 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.90lpi.1200dpi/90 lpi / 1200 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.90lpi.1200dpi/90 lpi / 1200 dpi: "30.0"
*ColorSepScreenProc ProcessYellow.90lpi.1200dpi/90 lpi / 1200 dpi: "
{2 {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch } repeat
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub } ifelse }"
*End
*% 110 lpi/1200 dpi
*ColorSepScreenAngle ProcessBlack.110lpi.1200dpi/110 lpi / 1200 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.110lpi.1200dpi/110 lpi / 1200 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.110lpi.1200dpi/110 lpi / 1200 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.110lpi.1200dpi/110 lpi / 1200 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.110lpi.1200dpi/110 lpi / 1200 dpi: "121.22"
*ColorSepScreenFreq ProcessCyan.110lpi.1200dpi/110 lpi / 1200 dpi: "102.52"
*ColorSepScreenFreq ProcessMagenta.110lpi.1200dpi/110 lpi / 1200 dpi: "102.52"
*ColorSepScreenFreq ProcessYellow.110lpi.1200dpi/110 lpi / 1200 dpi: "109.1"
*ColorSepScreenProc ProcessYellow.110lpi.1200dpi/110 lpi / 1200 dpi: "
{2 {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch } repeat
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub } ifelse }"
*End
*% End of PPD file for Kyocera FS-5800C (European English)