13242 %d is not a valid entry. Please specify a value between %d and %d for this field.
16901 The selected device cannot be configured from Remote Access Setup. Use the setup program provided by your hardware company to configure the device.
16902 Null modem cannot and should not be configured.
16903 At least one port must be configured to use Remote Access Service. Choose the Add button to add a port.
16904 Error creating file SERIAL.INI in the RAS directory.
16905 Dialog construction error %1.
16906 Changes will not be saved. Exit setup?
16907 Failed to initialize device list. %1
16908 Failed to initialize port list. %1
16909 Add list box item failed.
16910 Your system does not have any communication ports installed or the device driver for the communication port is not started.
16911 Error opening MODEM.INF file in the RAS directory.
16912 Error opening PAD.INF file in the RAS directory.
16913 Error opening SERIAL.INI file in the RAS directory.
16914 Error reading MODEM.INF file in the RAS directory. Reading modem entry %1
16915 Error reading PAD.INF file in the RAS directory.
16916 Error reading SERIAL.INI file in the RAS directory.
16917 Remove Port %1?
16918 Error writing to SERIAL.INI file in the RAS directory.
16919 RAS Setup has detected that you do not have any network cards installed and has disabled automatic restoration of network connections. To re-enable this feature configure RAS from the Network option in the control panel.
16920 rassetup.hlp
16921 Remote Access Setup
16922 You have not selected a modem. Choose OK to go back and make a selection that matches your modem.
16923 You tried to change or view the settings of an invalid modem. Select a valid modem.
16924 The local computer does not have any more configured ports that can be added to the port list.
16925 To Add or Configure more than one port, you need to be running the Windows NT Server.
16926 You cannot configure more than one port for receiving calls. To configure more than one port for receiving calls, you need to install Windows NT Server.
16927 There are no more ports of the specified type to clone.
16928 You are attempting to clone a port whose port usage is set to receive calls. To configure more than one port for receiving calls, you need to install Windows NT Server. The port usage will now be changed to dial out.
16929 Error reading configured TAPI DEVICES information from the registry at SOFTWARE\MICROSOFT\RAS\TAPI DEVICES.
16930 Error reading configured OTHER DEVICES information from the registry at SOFTWARE\MICROSOFT\RAS\OTHER DEVICES\CONFIGURED.
16931 An error occured while setting a mark on a section in the .INF file.
16932 An error occured trying to find a mark in the INF file.
16933 <None>
16934 This configuration is not required when no ports are configured for receiving calls. To configure a port for receiving calls, return to the main screen and choose Configure.
16935 There are no installed network adapter cards on the system. The configuration has been changed to allow remote clients to access this computer only.
16936 Unable to positively identify the modem on %1. %2
16937 Error creating the modem detect strings.
16938 Error opening the port. Make sure some other application is not using this port. It is also possible that the driver associated with the serial port is not loaded. Restart the system if you just installed the driver.
16939 Error detecting modem cable. Make sure the modem is powered on and connected to the port.
16940 Error sending an AT command to the modem. Make sure the modem is powered on and connected to the port.
16941 Choose OK to cancel modem detection and select a modem from the device list.
16942 Initialization command failed on modem:
16943 The cable connecting the port and the modem is not a proper modem cable. Refer to the cabling requirements section of Remote Access Phone book online help for the cabling details.
16944 Error getting TCP/IP information from the registry.
16945 Specify a start and end IP address before attempting to add the exclude range.
16946 Specify a start and end exclude address before attempting to add the exclude range.
16947 Select an excluded range from the list before attempting to delete it.
16948 There are no configuration parameters for this protocol.
16949 You have specified an IP End address that is less than the IP Start address. Change the End address.
16950 The Exclude range you have specified is either invalid or outside the range of IP addresses you have specified. Change the exclude address range.
16951 An error occured while attempting to save the network configuration to the registry. Try restarting the system and then reconfigure RAS to fix the problem.
16952 You must select at least one protocol for Remote Access to work. Make your choice by checking one of the check boxes.
16954 Enter a valid address range. The valid address range is 1 to 0xFFFFFFFD.
16955 Enter a valid IP address. The address for the specified subnet mask is %1
16956 Remote Access Setup detected modem \n <%1> on <%2>.
16957 Remote Access setup will attempt to detect the modem connected to the selected port. Modem detection will take a minute. Choose OK to continue or Cancel to select a modem entry from the list.
16958 Remote Access setup can only do modem detection on a serial port.
16959 You must allocate a total of %1 addresses or more for proper operation.
16960 The NetBEUI protocol provides the fastest throughput to NetBIOS resources when accessed over a Remote Access connection. If clients will access remote NetBIOS resources, configure RAS to use NetBEUI.
16961 Error getting NetBEUI information from the registry.
16962 The device [%1] exceeds the maximum allowed length of 32 characters. Edit %2 and change the device name. Setup will continue with configuration ignoring this invalid device.
16963 To change device settings for a dial out port use the Remote Access Phone Book.
16964 Due to import/export restrictions, data encryption is not available on this version of Windows NT.
16965 To assign remote TCP/IP client addresses using DHCP you need a DHCP server accessible on the network.
16966 This configuration requires too many NetBIOS resources.\n You can reduce this by:\n\n(1) removing some ports\n(2) changing some ports in the configuration from 'Dial out and Receive calls' usage to 'Dial out only' or 'Receive calls only' usage\n%1
16967 (3) disabling one or more server-side network protocols or \n(4) increasing the amount of physical memory on the computer
16968 The port you have selected was added using an older version of RAS setup and can not be cloned. Remove the port and add a new port for cloning.
16969 The following ports have been removed from the RAS configuration because they are no longer installed on this computer:\n\n%1\n\nAs a result, some of the existing ports may be renamed, to use the names of the removed ports.
16970 There are no RAS capable devices to Add. Do you want RAS setup to invoke the Modem installer to enable you to add a modem?
16971 You have added one or more ports to RAS. The number of static addresses configured is insufficient and needs to be increased.
16972 RAS unattended install failed because %1. Do you want RAS setup to continue in the attended mode?.
16974 unattended file is missing the PortSections line in the RemoteAccess section
16975 unattended file is missing the PortName line in the Port section or you specified an invalid PortSection name
16976 unattended file is missing the DeviceName line in the Port section
16977 unattended file is missing the DialoutProtocols and DialinProtocols lines in the RemoteAccess section
16978 an error occured while saving transport information to the registry
16979 setup encountered a memory allocation error
16980 unattended file is missing the StaticAddress line in the Port section
16981 unattended file is missing the StaticMask line in the Port section
16982 unattended file is missing the NetworkNumberFrom line in the Port section
16983 unattended script file specified an invalid port range Make sure the port name range is specified similar to COM1-COM32
16984 RAS setup failed the LoadString function. It is possible your computer is running out of memory. Close some applications and try setup again.
16985 you specified an invalid IP address in the StaticAddress value
16986 you specified an invalid IP mask in the StaticMask value
16987 you specified an invalid IP addres in the ExcludeAddress value
16988 the total number of IP addresses in the range is less than the number of dialin ports plus one. For example if you have 2 dialin ports specify 3 addresses
16989 you have specified an invalid address in the NetworkNumberFrom field. The valid address range is 1 to 0xFFFFFFFE
16991 No networking protocols are selected for RAS. This could be because you have not installed networking on your computer. Select one or more protocols for RAS and setup will install the selected protocol.
16992 setup was unable to add the modem specified in unattended file
16993 unattended file is missing the InstallModem line in the [Modem] section
16994 NetBEUI is selected for RAS but is not installed. Add NetBEUI specific information to your unattended file and restart setup
16995 TCP/IP is selected for RAS but is not installed. Add TCP/IP specific information to your unattended file and restart setup
16996 IPX is selected for RAS but is not installed. Add IPX specific information to your unattended file and restart setup
16997 No protocols are installed. Add one or more protocol specific sections to your unattended file and restart setup
16998 you specified an invalid PortUsage value
16999 you specified more than one port for receiving calls on an NT Workstation
17000 You should choose the port usage by checking the appropriate check box.
17001 Remote Access Service is not installed. The configuration has been changed to allow remote clients to access this computer only.
17002 Enter a non-zero IP address.
17003 Enter a non-zero subnet mask.
17004 You are deselecting Require data encryption, but have selected Require strong encryption. Strong encryption requires data encryption to be selected. Choose Yes to deselect both. Choose No to leave the current selection intact.
17005 Setup could not load rasrad.dll. Make sure this file exists in your system32 directory.
17006 Setup failed to get procedure address for RasAuthSetup() in rasrad.dll. Make sure this file exists in your system32 directory.
17007 You have one or more ports configured for Receive calls or Routing, but have no network protocols configured in the Server Settings. Correct this before saving the configuration.
17008 You have an invalid Authentication setting. Choose either 'Require Microsoft encrypted authentication' or 'RADIUS', but not both.
17009 You have exceeded the maximum number of ports (256) allowed in this configuration.
17010 you specified an invalid RouterType value in the unattended file. Valid values are RAS, DemandDial and LanToLan
