home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1999 October
/
VPR9910B.BIN
/
DRIVER
/
MATROX
/
RBRNT4
/
readme.txt
next >
Wrap
INI File
|
1998-03-17
|
9KB
|
199 lines
[English]
README.TXT MATROX GRAPHICS INC. 1998.03.17
Rainbow Runner Software for Windows NT
Version 2.00.012
Table of contents
-----------------
- Description of this release
- Rainbow Runner software installation contents
- Installation
- Notes, problems and limitations
Description of this release
---------------------------
This product includes Windows NT drivers for the Matrox Rainbow Runner
Studio add-on card, and the Matrox PC-VCR Remote program for Windows NT,
which lets you quickly access Rainbow Runner features.
Rainbow Runner software installation contents
---------------------------------------------
setup.exe install program
setup.ini install configuration file
rrunner.ini Rainbow Runner configuration file
readme.txt File holding important information about the product
rain_eng.dll English file needed for the installation
rain_fra.dll French file needed for the installation
rain_deu.dll German file needed for the installation
rain_ita.dll Italian file needed for the installation
rain_esp.dll Spanish file needed for the installation
main.mva Language independent compressed files
deamovie.exe German Active Movie Installation
amovie.exe English ActiveMovie Installation
itamovie.exe Italian ActiveMovie Installation
eng_files.mva compressed English files
fra_files.mva compressed French files
deu_files.mva compressed German files
ita_files.mva compressed Italian files
esp_files.mva compressed Spanish files
tvt.reg Registry information for TV Tuner tables
rrnt.reg Registry information for device drivers
Installation
------------
- The Rainbow Runner software installation program stops if you don't have a
Rainbow Runner add-on card properly installed in your computer, or if MGA NT
display drivers version 3.40.089 or greater are not already installed on
your system.
- If you see a message indicating that ActiveMovie cannot be installed,
it may be because ActiveMovie is already installed on your computer.
If you see this message, click "OK" and continue the Rainbow Runner
installation.
- You can uninstall Rainbow Runner software using the uninstall program in
the Matrox Rainbow Runner program group. You should restart your computer
immediately after you run the uninstall program.
- If you boot up in VGA, verify that the graphics board is in a Primary PCI
slot. The display driver will not initialize in to a high-resolution mode
(the display will remain in VGA) if the graphics card is not in a primary PCI
slot.
- To get best performance from Microsoft Netmeeting, install the Rainbow Runner
software after installing Microsoft Netmeeting. If Rainbow Runner software was
installed before you installed Microsoft Netmeeting, reinstall Rainbow
Runner software.
- Multiple CPU systems are not supported. The Rainbow Runner software will not
install or run on multiple CPU systems.
Notes, Problems, and Limitations
--------------------------------
- There are maximum video window sizes for live video ("TV" or "LINE" input).
These maximum video window sizes depend on your display settings and graphics card.
For more information, see the "Display information" section of your Rainbow
Runner Studio manual.
- Problems may occur if you change display settings (resolution or color
palette) or switch to full-screen DOS while running video programs
(programs that capture, play back or edit video).
- Changing display settings while PC-VCR Remote is open is only supported using
MGA Display Properties or MGA QuickDesk, while viewing live video or TV; however,
the video window may stop updating. To restore it, click on the window.
Problems may occur if applications switch resolutions while Rainbow Runner
drivers are in use.
- There is no support for MJPEG recording or playback under NT, only RGB recording
is supported.
- Multiple Rainbow Runner boards in one system is not supported. Systems with
one Rainbow Runner board and multiple Mystique or Millennium II boards are
supported. The Rainbow Runner board has to be on the primary display card.
Live video, TV or hardware MPEG video will only be shown on the primary display;
problems will occur if the video window is dragged onto another display monitor.
- Suspend mode is not supported when using the Rainbow Runner software or
when using any of the TV Out modes.
- When you drag-and-drop video files onto the PC-VCR Remote icon, long file
names are converted to the old 8.3 DOS-naming style in the PC-VCR Remote
menu window and on video window title bar.
- If Microsoft Media Player does not respond, try clicking on the
Windows desktop background, then clicking on Media Player - this may
restore control.
- Only one program at a time can use Rainbow Runner hardware. Before
starting a video program, close any other video program that may be
running.
- Because of a limitation in Microsoft Video for Windows, video files
you capture are limited to a 2 GB size.
- With a Matrox Millennium II graphics card, TV out mode is supported only
with a 16-bit color palette. (Note that many games support only an 8-bit
color palette. If you're using a Millennium II graphics card, these games
can't be viewed on a TV.)
- With a Matrox Millennium II graphics card, TV output in full-screen
VGA/DOS display modes are not supported.
- With a Matrox Millennium II graphics card, placing a window over a video
window may cause the video window to go to black. (The video continues
to play, but it's not displayed in the video window.) This happens at
the following display settings:
Color palette Display area
------------- ------------
16 bits 1152 x 864 and higher
24 bits 1024 x 768 and higher
32 bits all
The video plays normally when you remove all windows overlapping the
video window, or move the video window in front of all other windows.
- When the "Use dual-fields in full-screen mode" feature is active in
PC-VCR Remote (see its context-sensitive Help), placing any window over
the full-screen video window causes the video window to go black. (The
video continues to play, but it's not displayed in the video window.)
The video plays normally when you remove all windows overlapping the
video window.
- For PC-VCR Remote video snapshots, only the portion of the video
window that is inside your Windows desktop area is saved.
- Ensoniq Sound Cards (certain models): Some Ensoniq sound card, for example
the SoundScape Vivo 90, will lose audio when seeking or stopping and
restarting any video file. This happens when double clicking on a file or
using Active Movie through MediaPlayer. To avoid this problem, use the
PC-VCR Remote to view your video files.
- ESS Sound chips (certain models): Some sound card equipped with the ESS
audio chip, for example the ESS 1878 found on laptops, may experience a
loss of audio-video synchronization when playing back video files. Video
will be late compared to audio whenever pausing and restarting the playback.
To correct this problem, click on the PC-VCR Remote's Playback Status Bar
to jump to a particular area in the file.
- With the Microsoft NetMeeting program, use "preview" mode. Netmeeting
doesn't support "overlay" mode for Rainbow Runner. For more information
on preview mode, see the Rainbow Runner Studio manual.
- DOS windows may conflict with the video window. The video may stop or be
captured by the DOS window. To restart the video, click on any window other
than the DOS window. To avoid the video being captured by the DOS window, do
not overlap the windows. To remove the captured video from the DOS window,
temporarily move the portion of the window with captured video off the
screen.
- Due to a limitation in Microsoft Video for Windows on NT, there are a maximum
number of frames (accumulative) one can capture when using RGB recording.
The maximum number of video frames you can record depends on your workstation's
amount of RAM and CPU speed. When you reach the limit, you will receive the
message -- "Error: cannot write to capture file. Data rate too high or disk full."
even if the disk is not full. When this happens, please exit the application and
restart it. For applications supporting the preallocation of the capture file,
you can overcome this limitation by preallocating the file before recording.
- For RGB recording, the number of video buffers accepted by the driver is limited
to 35. If you are over this limit, you will get the message "Error: Out of memory
for video buffers." This happens only in applications that allow you to adjust
the number of video buffers. If this happens, exit the application, restart it,
and adjust the video buffer parameter.
- Must close video capture programs prior to logging off of your NT session.