home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1999 October
/
VPR9910B.BIN
/
DRIVER
/
DIAMOND
/
3DP3207
/
3dp3207.txt
< prev
next >
Wrap
Text File
|
1999-07-21
|
11KB
|
281 lines
=======================================================================
Stealth 3D 2000 Pro Series README.ENG
=======================================================================
Installation Notes
------------------
CD Installation
---------------
The Windows 95 drivers contained on this CD-ROM can be installed directly
from the CD-ROM. First you must have Windows 95 installed with the Standard
VGA driver (640x480x16) before you install the Diamond Stealth 3D 2000 Pro
Series Windows 95 drivers. If you are running a different graphics mode
please re-configure for Standard VGA.
After rebooting in VGA mode run the START program from the CD's root
directory: X:\start.exe (Where X is the drive letter of your CD-ROM drive).
Follow the instructions to install the Windows 95 drivers and at the end you
will be prompted to reboot your system.
Manual Installation Instructions
--------------------------------
A. If Windows 95 is already installed
--------------------------------------
1. When you first install the video card in the system and power on, Windows
95 will inform you that it has discovered a new "PCI VGA-Compatible
Display Adapter" and will prompt you to install drivers for it. At this
point you will want to select "Do not install a driver" and click "OK".
2. Next select "Cancel" when the message box appears indicating that your
display adapter is not configured properly. Select "Cancel" once again
when the "Display Properties" dialog comes up.
3. Next right click on "My Computer" and select "Properties". Then select
the "Device Manager" tab.
4. Now within the "Device Manager" you will want to double-click "Other
devices", highlight the "PCI VGA-Compatible Display Adapter" and select
"Properties".
5. Now select the "Driver" tab and click the "Change Driver..." button.
6. Scroll through the "Hardware Type" list until you find "Display adapters".
Highlight this selection and click "OK".
7. You should then be able to highlight "(Standard display types)" and select
"OK" to accept the "Standard Display Adapter(VGA)" option.
8. Now click "OK" once again to install the "Standard Display Adapter(VGA)"
driver.
9. When Windows 95 prompts you to restart the computer, click "Yes".
10. Once Windows 95 restarts you will want to click the "Start" button, then
choose "Run...".
11. Now insert the Diamond CD into the your CD-ROM drive and within the "Run"
dialog box type the following: "x:\WIN95\INSTALL" where x is the
corresponding letter of the CD-ROM drive.
The following command line switches can be used with INSTALL:
/f This forces a Full installation
(Diamond Stealth 3D 2000 Pro Series
Windows 95 Display Driver and
InControl Tools 95).
/m This forces a Minimal installation
(Diamond Stealth 3D 2000 Pro Series
Windows 95 Display Driver only).
/d"drive:\path" This installs InControl Tools 95 into
drive:\path. Note that the quotes,
drive letter and path are required.
In addition, either the /f or /m
switch must be used in conjunction
with this selection.
/r This forces a system reboot after
installation. Note that either the /f
or /m switch must be used in
conjunction with this selection.
/nr This prevents a system reboot after
installation. Note that either the /f
or /m switch must be used in
conjunction with this selection.
uninstall This will completely uninstall the
Diamond Stealth 3D 2000 Pro Windows 95
Display Driver and InControl Tools 95.
12. Once the Diamond Setup Wizard dialog box appears you will be able to
review the Readme file or continue on with the installation by selecting
"Next".
13. The Setup Wizard will now check for Diamond components installed in your
computer. Click "Next" to proceed.
14. A dialog box will appear containing the path where InControl Tools 95 will
be installed. The default path is:
"C:\Program Files\Diamond"
Select "Next" or change the path as necessary.
15. The next dialog box selects the installation type. There are three
installation types: Minimal, Full and Custom. They are defined as
follows:
Minimal: This will install only the Diamond Stealth 3D
2000 Pro Series Display Driver.
Full: This will install both the Diamond Stealth 3D
2000 Pro Series Display Driver and InControl
Tools 95.
Custom: This will allow installation of either the
Diamond Stealth 3D 2000 Pro Series Display
Driver or InControl Tools 95. At the minimum,
the Diamond Stealth 3D 2000 Pro Series
Display Driver must be installed during a
first-time installation.
16. If "Custom" was selected in step 15, a dialog box will appear allowing
the selection of various items. Select the items to be installed by
clicking on them with the left mouse button. When finished, click "Next"
to continue.
17. At the "Select Files to be copied" dialog box, click "Next" to begin the
file copying process.
18. After the files have been copied you will want to click "Finish" in order
to complete the installation.
19. Windows 95 will ask that the computer be restarted. Click on "Yes" to
restart the computer.
20. Once Windows 95 restarts, you will have successfully installed the
software for your Diamond Stealth 3D 2000 Pro Series. The InControl
Tools 95 Wizard will then guide you the rest of the way. Thank you for
choosing Diamond!
B. Installing Windows 95 after installing the Stealth 3D 2000 Pro
------------------------------------------------------------------
1. If you install Windows 95 after you have installed the Stealth 3D 2000
Pro Series, Windows 95 will use a generic S3 driver for the Stealth 3D
2000 Pro Series. In order to install the provided Diamond Stealth 3D 2000
Pro Series Windows 95 Display Drivers, complete the following steps.
2. First right click on "My Computer" and select "Properties". Now select
the "Device Manager" tab.
3. Under "Display adapters" you will want to highlight "S3" and click
"Remove". Then click "OK" to confirm the device removal.
4. Next select "No" when Windows 95 prompts you to restart the computer.
Note: You will want to keep the "Device Manager" open in order to proceed
with the installation.
5. From this point on, you will be able to complete the installation by
continuing with Step 4 which is provided within the section above labeled:
"A. If Windows 95 is already installed".
All product names listed are trademarks or copyrights of their
respective owners.
Contacting DIAMOND
------------------
Diamond can be reached through a number of ways:
Diamond - USA
Postal Service:
Diamond Multimedia Systems, Inc.
Headquarters
2880 Junction Avenue
San Jose, CA 95134 USA
Technical Support
7101 Supra Drive SW
Albany, OR 97321
USA
Telephone: (541) 967-2450
Fax: (541) 967-2401
BBS: (541) 967-2444
Email: techsupt@diamondmm.com
Web site: www.diamondmm.com
Germany
Moosstrasse 18B
D-82319 Starnberg, Germany
Tech Support Telephone: +49 8151 266 330
Tech Support Fax: +49 8151 266 331
Fax On Demand: +49 8151 266 332
Mailbox: +49 8151 266 333 (Modem, up to 33,6 kbps)
Mailbox: +49 8151 266 356 (Modem, k56flex / 56 Kbps)
Mailbox: +49 8151 266 334 (ISDN, x.75)
Office, Main Number: +49 8151 266 0
web site: www.diamondmm.de
United Kingdom
Diamond Multimedia Systems, Ltd.
610 Wharfedale Rd.
Winnersh Triangle
Wokingham, Berkshire,
RG41 5TY
England
Tech Support Telephone: +44-1189-44 4444
Tech Support Fax: +44-1189-44 4445
Mailbox: +44-1189-44 4415 (Modem, up to 33.6 Kbps)
Mailbox: +44-1189-44 1312 (Modem, k56flex / 56 Kbps)
Office, Main Number: +44-1189-44 4400
web site: www.diamondmm.de
Japan
Diamond Multimedia Systems
Maruchu-Nihonbashi Bldg 4F
10-14 Nihonbashi-Tomizawacho
Chuo-Ku, Tokyo 103
Japan
Tech Support Telephone: +81-466-28-5092
Main Fax: +81-3-5695-8403
Office, Main Number: +81-3-5695-8401
web site: www.diamondmm.co.jp
France
Diamond Multimedia Systems, Inc.
6 Boulevard General LeClerc - 15th Floor
92110 Clichy France
Tech Support Telephone: +44-1189-44 44 33
Tech Support Fax: +44-1189-44 44 45
Mailbox: +44-1189-44 4415 (Modem, up to 33.6 Kbps)
Mailbox: +44-1189-44 1312 (Modem, k56flex / 56 Kbps)
Office, Main Number: +33-1-47 56 11 57
Office, Main Fax: +33-1-47 56 11 39
web site: www.diamondmm.de
Singapore
51 Goldhill Plaza #16-06
Podium Block, Singapore 308900
Tel: +65-3539511
Fax: +65-3539510
Korea
27th Floor, Korea World Trade Center
159 Samsung-Dong Kangnam-Ku
Seoul, Korea 135-729
Telephone: +82-2-551-2743/2747
Fax: +82-2-551-2744/2720
Hong Kong
Suite 1111 , Tower II , Silvercord
30 Canton Road , T.S.T.
Kowloon, Hong Kong
Telephone: +852-23759023
Fax: +852-23759021
All product names listed are trademarks or copyrights of their
respective owners.
=======================================================================
Diamond Multimedia Systems, Inc. (c) 1993-97, All Rights Reserved
=======================================================================