home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1998 August
/
VPR9808B.BIN
/
BIOS
/
aopen
/
Ap4eide
/
AP4EIDE.EXE
/
README.TXT
< prev
next >
Wrap
Text File
|
1996-05-13
|
2KB
|
33 lines
SIS Installation Utility
==========================
1. Under "IDE DEVICE DRIVER INSTALL UTILITY", user can install SiS
IDE DOS/WINDOWS/Windows for Workgroup/Netware Driver directly
from according "INSTALL DRIVER" menu.
2. Under "IDE DEVICE DRIVER INSTALL UTILITY", user can read installa-
tion procedures for SiS IDE Windows NT/OS2/Sco-Unix Driver from
according "INSTALL DRIVER" menu.
3. If user need to set wait state manually in config.sys,
notice that :
Disk Mode | 4 3 2 1 0
Wait State | 0 1 3 5 7
4. SiS IDE Driver Installation For Windows 95
Windows 95 provides a "Standard IDE/ESDI Hard Disk Controller" in
Windows 95's packages. This controller can apply to SiS 496 chip-
set with 32-bit access and good performance. Due to SiS 496 chip-
set is standard VL bus IDE controller. Users don't have to install
other IDE Driver on SiS 496 base Main Board.
--------------------------------------------------------------------------
Q & A :
1. How to use 32-bit file access for HD and CD-ROM working at the
same channel in WFW 3.11 environment ?
Ans: It is a limitation of the system. You should either put the
devices in different channel or turn the 32-bit file access off.
--------------------------------------------------------------------------