home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Vectronix 2
/
VECTRONIX2.iso
/
FILES_01
/
MASTCALI.LZH
/
README.TXT
< prev
next >
Wrap
Text File
|
1993-12-07
|
1KB
|
36 lines
Mastering Calligrapher 3.0
By Spar Systems
The MASTRCAL.CFG file configuration is setup for the C:\
drive partition of your hard drive. You may change the drive
if you wish.
The MASTRCAC.RSC file has interface gadgets for the ST Medium
resolution. The MASTRCAL.RSC is for resolutions starting from
640x400 and up.
Road map
Take a look at the examples in the 'EXAMPLE' folder.
--------------------------------------------------------------
Things About Calligrapher 3.0
Q: I cannot see the Calligrapher desktop icons referred to
in the manual.
A: Your Calligrapher desktop icons were configured for a big
screen monitor (1280x960), and you will not have access to
these icons when used in 640x200, 640x400 or 640x480. To
correct this you will have to re-configure the icons by
dragging them at the left upper corner of your big screen
monitor and exit, and then run Calligrapher in 640x200,
640x400 or 640x480 and reposition the icons to suit your
fancy. Calligrapher will record the position of the icons.
If you don't have access to a big screen monitor, you can
use one of the 'virtual big screen emulators (i.e. MONSTER.PRG)'
and follow the above steps. If you don't have a virtual
screen emulator, contact: Working Title in England or
CodeHead in America -- voice: 213-386-5735,
Fax: 213-386-5789.