home *** CD-ROM | disk | FTP | other *** search
/ C!T ROM 5 / ctrom5b.zip / ctrom5b / CTSELECT / SPACH166 / README.TXT < prev    next >
Text File  |  1995-03-25  |  8KB  |  202 lines

  1. Space Hound version 1.66
  2. Copyright (C) 1994 and 1995 by Fineware Systems and Al Meadows
  3. All Rights Reserved
  4.  
  5. Note:  See ReadMe.1st if you are upgrading 
  6.  
  7. *** Standard Installation ***
  8.  
  9. Follow this easy one-time installation procedure:
  10.  
  11. 1) Create a directory to hold the Space Hound related files.  The
  12. recommended directory name (used in the following instructions) is
  13. "C:\Spacehnd".
  14.  
  15. 2) Copy all Space Hound-related files to this directory.  At a minimum
  16. you need the following files:  
  17. SPACEHND.EXE
  18. HOUND1.DLL
  19. HOUND2.DLL
  20. HOUND3.DLL
  21. SPACEHND.HLP
  22.  
  23. 3) Note:  You will also need a copy of VBRUN300.DLL.  This file is
  24. available within many CompuServe forums. To obtain this file from
  25. CompuServe, GO WINUTIL and search for the file VBRUN3.ZIP.
  26.  
  27. 4) You may optionally copy the following files to C:\Spacehnd:
  28.    APIGUIDE.DLL
  29.    MHRUN400.DLL
  30.    CMDIALOG.VBX   
  31.    MHGCMD.VBX
  32.    MHTR200.VBX
  33.    MHVIEW.VBX
  34.    MUSCLE.VBX
  35.    THREED.VBX
  36.    SSDATA2.VBX
  37.    SSIDXTAB.VBX
  38.  
  39. Note:  It is possible that you may have existing copies of these files
  40. within your WINDOWS or WINDOWS\SYSTEM directory or within other directories
  41. on your system.  These files are used by many different applications both
  42. from shareware and commercial companies.  The proper location for these
  43. files is within the WINDOWS\SYSTEM directory.  Caution, before you copy
  44. these files to the WINDOWS\SYSTEM directory, you should use the Windows
  45. File Manager to see if copies of these files already exist.  
  46.  
  47. If these files are not present within the WINDOWS\SYSTEM directory, you
  48. may simply copy them into it and proceed to step 5. 
  49.  
  50. If versions of any of the files are already on your computer, you should
  51. use the Windows File Manager to look at each file's date & time to determine
  52. if the existing version is newer than the files included within the 
  53. SPACEHND.ZIP file.  If your existing files are newer, Space Hound should
  54. work just fine with them and you can proceed to step 5.
  55.  
  56. If the Space Hound files are newer, you should move your original files
  57. to a temporary directory in case you encounter problems with other
  58. software and need to get them back.  
  59.  
  60. Once you have moved the older files to a temporary location, you may
  61. copy the Space Hound supplied versions to your WINDOWS\SYSTEM directory.
  62. Note:  Once Space Hound is installed and running, you can use it's ability
  63. to peek inside files and view the file's version information.  This will 
  64. generally confirm which one is the older version.
  65.  
  66. 4) Use the Windows Program Manager to place Space Hound within an
  67. existing program group or create a new group and then add the program
  68. to it.  Refer to your Windows' documentation on adding new programs
  69. and groups.  
  70.  
  71. NOTE: Fineware is aware that the install process is complicated and we
  72. would like to help.  In general, shareware downloads need to be as small
  73. as possible to reduce connect time charges.  If you are not comfortable
  74. with the installation process described above, you may contact us and
  75. for a small postage and handling charge ($2), we will send you a complete
  76. setup and installation package.  This will still be the unregistered
  77. version of Space Hound but it will contain everything you need to
  78. properly and easily install the program.
  79.  
  80. That's all there is to installing Space Hound.  When Space Hound is
  81. activated for the first time, a few one-time only dialog boxes and
  82. messages are displayed.
  83.  
  84. Remember that while Space Hound is active, online help is always
  85. available by pressing the F1 key.
  86.  
  87. Common installation problems:  
  88. Many of today's applications include components from other 3rd party
  89. distributors.  These components are like snap-together parts.
  90. When an application is initially designed, the programmer
  91. is probably using the latest version of all of the components his
  92. application needs.  Over time, these components may be enhansed to
  93. include new features and capabilities.  A frequent problem occurs when
  94. a newer application makes use of features that were not available
  95. in earlier version of the software.  This can cause problems when
  96. multiple versions of these components exist on your computer. 
  97. Please refer to the following list of files and eliminate older
  98. version if possible.  
  99.    SPACEHND.EXE  
  100.    APIGUIDE.DLL  
  101.    MHRUN400.DLL  
  102.    CMDIALOG.VBX  
  103.    MHGCMD.VBX    
  104.    MHTR200.VBX  
  105.    MHVIEW.VBX    
  106.    MUSCLE.VBX    
  107.    THREED.VBX 
  108.    SSDATA2.VBX
  109.    SSIDXTAB.VBX
  110.  
  111. Other Common Problems:
  112.  
  113. SYMPTOM:  Attempts to run any of the reports or displays cancels the
  114. program all the way to the DOS prompt.
  115. CURE:  Your autoexec.bat file contains a line for the CD-ROM driver called
  116. MSCDEX.  This line ( or a preceeding line) may contain a parameter which
  117. is causing the problem.  Check for /S on the MSCDEX line.  If it is there,
  118. remove it.  It's only function is to allow multiple PCs to share a CD-ROM
  119. drive over a Windows for Workgroups network.  If the /S appears in the
  120. preceeding line, try re-arranging the order of the lines in autoexec.bat 
  121. so that this line doesn't directly preceed the MSCDEX line.
  122.  
  123. SYMPTOM:  A GPFault occurs when you launch the program.  Normally, this
  124. will be the result of a conflict with some aspect of Space Hound and
  125. your video card.  The module that reports the fault will have a file
  126. extension of .DRV and most likely, you will be using a driver with more
  127. than 256 colors.
  128. CURE:  Make sure that you are using the latest driver.  Contact your video 
  129. card manufacturer.  If this does not fix it, try adjusting the number of
  130. colors used up or down as well as adjusting the resolution. If this still
  131. does not correct the problem, use the standard VGA drivers which ship
  132. with Windows.  One option you might wish to try is to add the following
  133. lines to the SPACEHND.INI file which is located within the application's
  134. directory.
  135.  
  136. [Toolbar]
  137. Visible=0
  138.  
  139. [Statusbar]
  140. Visible=0
  141.  
  142. These settings disable the toolbar and status bar.  Both of the screen
  143. elements contain graphic images and they could be the source of your
  144. screen driver problems.
  145.  
  146. SYMPTOM:  Attempts to print cause a GPFault or subsequent errors are
  147. see in standard Windows components.  An example is getting a Divide by Zero
  148. error when you attempt to launch Windows WRITE.
  149. CURE:  You are probably using a PostScript printer driver or other 3rd
  150. party print spooler.  The only work around is to use the miscellaneous
  151. options and set the Printer ByPass option under the Miscellaneous tab.
  152. Should this error occur, the method to restore your system to normal
  153. functionality is to remove your current printer driver (via the Windows
  154. Control Panel) and Re-install it.
  155.  
  156. >>>      New Users:  Please select "Contents"       <<<
  157. >>> from the Space Hound "Help" pull-down menu.     <<<
  158.  
  159. *** Requirements ***
  160.  
  161. This program requires Windows 3.1 or Windows for Workgroups.  
  162.  
  163. *** Documentation ***
  164.  
  165. For full documentation, including context sensitive help, press
  166. the F1 key at any time while running Space Hound.
  167.  
  168. *** List Of Files ***
  169.  
  170. The Space Hound 1.62 package consists of the following files:
  171.  
  172. README.TXT   introductory information
  173. SPACEHND.HLP complete documentation in windows help format
  174. SPACEHND.EXE required executable
  175. HOUND1.DLL   required module
  176. HOUND2.DLL   required module
  177. HOUND3.DLL   required module
  178. APIGUIDE.DLL required dynamic link library
  179. MHRUN400.DLL required dynamic link library
  180. CMDIALOG.VBX required custom control
  181. MHGCMD.VBX   required custom control
  182. MHTR200.VBX  required custom control
  183. MHVIEW.VBX   required custom control
  184. MUSCLE.VBX   required custom control
  185. THREED.VBX   required custom control
  186. SSDATA2.VBX  required custom control
  187. SSIDXTAB.VBX required custom control
  188. LICENSE.TXT  license agreement/warranty disclaimer
  189. ORDER.TXT    order form
  190. VENDOR.TXT   information for Shareware Distributors/Disk Vendors
  191. FILE_ID.DIZ  brief description for bulletin boards
  192.  
  193. If you did not receive all these files please contact the author via
  194. electronic mail to 
  195. 70650,2022 on CompuServe, 
  196. 70650.2022@compuserve.com on Internet,
  197. fineware@icon.net on Internet
  198. BBTK05A on Prodigy,
  199. VB AL on America OnLine,
  200. or by sending postal mail to Fineware Systems, P.O. Box 75776,
  201. Oklahoma City, Ok 73147.
  202.