home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
C!T ROM 2
/
ctrom_ii_b.zip
/
ctrom_ii_b
/
PROGRAM
/
ASSEMBLE
/
80X0992
/
DIALER.TXT
< prev
next >
Wrap
Text File
|
1992-09-30
|
1KB
|
34 lines
By: Inbar Raz
Re: Resident dialer
--------------------------------------------------------------------
Hello everyone.
Here is a little, but great program I once wrote. This is a resident background
dialer for the modem. What you do is hit SysReq, dial the number you wish to
call using either the numeric pad or the ordinary digits, press Enter, and the
modem dials the number. Now you have two possibilities:
1. If you are calling someone voice, you pick up the phone and press any key
except for ESC. The modem hangs up and the phone is in charge.
2. If you are trying to access a modem, you press ESC, and the program returns
control to the system, without hanging the modem up. This way you can go to
your telecomm. program and run it, such as 'TELIX O', ('O' to NOT init.).
The program is in very basic assembly, and it was written quite some time ago,
so don't expect to much of the source.
IMPORTANT =
Don't forget to setup the program. It is currently set to work with COM2. If
your modem is on another COM port, simple change the Port definition to the
appropriate - COM1 = 0, COM2 = 1 etc.
Anopther thing is the dialing prefix. If your modem or phone line does not
support TONE dial, change the 'T' in DialPre1 to 'D'.
Enjoy. Any comments will be gladly accepted.
Inbar Raz