home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
C!T ROM 2
/
ctrom_ii_b.zip
/
ctrom_ii_b
/
FLIGHTSI
/
VLIEGTUI
/
RUSSAIR2
/
BD5J____.DOC
< prev
next >
Wrap
Text File
|
1993-12-30
|
13KB
|
288 lines
The RUSSAIR collection of planes for Microsoft Flight Simulator 4.0b.
Documentation
(Updated November 7, 1993)
Copyright 1992-1993 by Russell Mueller
Member of the Association of Shareware Professionals
_______
____|__ | (R)
--| | |-------------------
| ____|__ | Association of
| | |_| Shareware
|__| o | Professionals
-----| | |---------------------
|___|___| MEMBER
"AAF version of Bede BD-5J"
(1st Edition) by Russell Mueller 1992
(2nd Edition) February 19, 1993
An add-on aircraft for Microsoft Flight Simulator.
Created with Mallard's Aircraft & Adventure Factory
(AAF not required, although the AFX and Reference files
are included in this ZIP for those who wish to tinker
with this plane.)
Files:
BD-5J.DOC This documentation file
BD-5J___. Copy this file to your \FS4 subdirectory to fly
BD-5J___.SIM Copy this file to your \FS4 subdirectory to fly
Changes in 2nd Edition:
1. Fixed flap drag bug. I had set drag at 500 instead of 50,
so when dropping flaps in the previous version, it was
like hitting a wall.
2. Slight modification to canopy frame to make it look less square.
Model and Manufacturer:
BD-5J
Bede Aicraft Company
Designed by Jim Bede
Description:
The BD-5 is a single-place, all aluminum homebuilt
airplane that was developed by Jim Bede in the early 70's.
It was marketed as a complete kit, including engine,
however engine development problems contributed to the
bankruptcy of the Bede Aircraft Company. In spite of this
obstacle, there are a few BD-5's flying with various engines
including a Honda Civic automobile engine. There have also
been several planes built on the BD-5 fuselage including the
Acapella.
Early development showed a problem with high wing loading
and dangerous stall characteristics. The wing was increased in
length, and the stabilator was relocated. At high angles of
attack, the wing can shadow the stabilator and cause loss of
pitch control.
Later in the development cycle, a French Microturbo engine
was used. Several jet versions of the plane were sold, including
one to Richard Bach of Jonathon Livingston Seagull fame. The jet
version, called the BD-5J used a wing of intermediate span between
the short wing and the later long wing. There are currently several
BD-5J's flying at airshows (Coors Silver Bullet, and the
Bud Lite).
Note: if I got these facts wrong, then it is due to bad memory as I
lost most of my BD-5 references a while ago, and only had one reference
article to work from.
Flying:
FS4 has a minimum thrust of 1000 lbs for the Experimental Jet
so the power was be boosted from 200 lbs of thrust of the real
plane to 1000 lbs. for this model. This power gives extraordinary
performance, which is artificially limited in the ASD model to 300
knots, although the real plane max'es out at around 240-250 knots.
Also the minimum weight in ASD is 700 lbs, although a real BD-5 would
be around 500 lbs.
Start the engine using the FS4 command 'M5', and then
increase the throttle as in a normal plane.
Landing:
No special requirements here. You can easily make a
powered landing at 30% throttle setting. If using flaps,
then you will need to carry some power all the way through
to the landing flare.
I like to fly with a ThrustMaster FCS or FCS Pro
joystick, and set the sensitivity to maximum
(4-E-B-8-ESC-ESC) for most planes.
Cruise:
My methodology for checking top speed is to use the
autopilot, set an altitude, usually 10,000 feet, and then
let the plane settle in level flight. The model BD-5B
attained 300 knots using 1000 lbs of thrust in the SIM
model.
AAF NOTES:
Parts: 125
MP: 136% (Not Multi-Player Compatible)
Additional Notes:
The dimensions of the plane were estimated from drawings
and information in an article in "Homebuilt Aircraft" magazine,
"BD-5, Is The Wing The Culprit?", by Herbert Gillespie and
Vernon McCloskey, April 1983 issue. I only had a side view to
work from and estimated wing and stabilator dimensions from
photos.
DEFINITION OF SHAREWARE
Shareware distribution gives users a chance to try software
before buying it. If you try a Shareware program and continue
using it, you are expected to register. Individual programs
differ on details -- some request registration while others
require it, some specify a maximum trial period. With
registration of RUSSAIR, you get the most recent revision of
the airplane files for use with Microsoft Flight Simulator 4.0b,
and source code for use with Mallard's Aircraft and Adventure Factory.
Copyright laws apply to both Shareware and commercial software,
and the copyright holder retains all rights, with a few specific
exceptions as stated below. Shareware authors are accomplished
programmers, just like commercial authors, and the programs are
of comparable quality. (In both cases, there are good programs
and bad ones!) The main difference is in the method of
distribution. The author specifically grants the right to copy
and distribute the software, either to all and sundry or to a
specific group. For example, some authors require written
permission before a commercial disk vendor may copy their
Shareware.
Shareware is a distribution method, not a type of software. You
should find software that suits your needs and pocketbook,
whether it's commercial or Shareware. The Shareware system makes
fitting your needs easier, because you can try before you buy.
And because the overhead is low, prices are low also. Shareware
has the ultimate money-back guarantee -- if you don't use the
product, you don't pay for it.
DISCLAIMER - AGREEMENT
Users of RUSSAIR planes must accept this disclaimer of warranty:
"RUSSAIR planes are supplied as is. The author disclaims all
warranties, expressed or implied, including, without limitation,
the warranties of merchantability and of fitness for any purpose.
The author assumes no liability for damages, direct or conse-
quential, which may result from the use of RUSSAIR planes."
RUSSAIR is a "shareware program" and is provided at no charge
to the user for evaluation. Feel free to share it with your
friends, but please do not give it away altered or as part of
another system. The essence of "user-supported" software is to
provide personal computer users with quality software without
high prices, and yet to provide incentive for programmers to
continue to develop new products. If you find these program files
useful and find that you are using RUSSAIR planes and continue to use
RUSSAIR after a reasonable trial period, you must make a reg-
istration payment to Russell Mueller for each RUSSAIR set.
The registration fee will license one copy of the collection for use
on any one computer at any one time. You must treat this software just
like a book. An example is that this software may be used by any
number of people and may be freely moved from one computer
location to another, so long as there is no possibility of it
being used at one location while it's being used at another.
Just as a book cannot be read by two different persons at the
same time.
Anyone distributing RUSSAIR planes for any kind of remuneration must
first contact Russell Mueller at the address below for authorization
and licensing agreement.
You are encouraged to pass a copy of RUSSAIR along to your
friends for evaluation. Please encourage them to register their
copy if they find that they can use it. All registered users
will receive a copy of the latest version of the RUSSAIR
system, software support via mail for 3 months
from date of registration, and the source code for use with
Mallard's Aircraft and Adventure Factory for modifying the
planes for your own personal use. The planes may not be used
in a commercial, shareware, or other retail program without
a license from the author.
***ASP Ombudsman Policy********************************************
"This program is produced by a member of the Association of Shareware
Professionals (ASP). ASP wants to make sure that the shareware principle
works for you. If you are unable to resolve a shareware-related problem with
an ASP member by contacting the member directly, ASP may be able to help.
The ASP Ombudsman can help you resolve a dispute or problem with an ASP
member, but does not provide technical support for members' products.
Please write to the ASP Ombudsman at 545 Grover Road, Muskegon, MI 49442
or send a Compuserve message via Compuserve Mail to ASP Ombudsman
70007,3536.
The OMB may be contacted by FAX by sending to the ASP FAX number:
(616) 788-2765. In communication with the OMB, please include a
telephone number and/or FAX if available."
*******************************************************************
INSTALLATION of the RUSSAIR collection of planes:
1. You must first have installed Microsoft Flight Simulator 4.0b on your hard drive.
If you do not have Microsoft Flight Simulator 4.0b, contact Microsoft for an
upgrade to 4.0b.
2. Copy all the files from the floppy and unarchive them if necesssary.
3. Copy the files for each plane to your \FS4 subdirectory.
4. Start Flight Simulator 4 and select a new plane from the menus using
"1, E" and scroll through the planes listed using the "6" key.
Information on each plane can be viewed using the "7" key.
For further information on using different planes in Microsoft Flight Simulator,
consult the manual from the game.
All my AAF creations are original works and not modifications of another's
AAF work. They are copyright by Russell Mueller and may not be resold
or used in any commercial, retail, or shareware program without arrangement
with the author.
BBS sysops may not charge for the distribution of this file. Free access type
BBS's may include the RUSSAIR collection in their libraries for distribution.
The following is a list of planes that are available on the Flight Simulator forum
on Compuserve. GO FSFORUM and browse in Library 5.
They are available directly from the author/creator in three sets:
Each set is $ 5 U.S.
Two sets for $ 8.00 U.S.
All 3 sets for $10.00 U.S.
RUSSAIR SET #1
1. GLASRG.ZIP Glasair Retractable
2. GLASFT.ZIP Glasair Fixed Trigear
3. GLASTD.ZIP Glasair Tail Dragger
4. VARVIG.ZIP Rutan VariViggen
5. SOLITR.ZIP Rutan Solitaire
6. VOYAGR.ZIP Rutan Voyager
7. QUICKI.ZIP Quickie Homebuilt
8. X-29.ZIP Grumman/NASA X-29 FSW
9. LONGEZ.ZIP Rutan LongEZ
10. XF5U-1.ZIP Vought Flying Pancake
RUSSAIR SET #2
11. B100.ZIP Beech King Air B100
12. P3.ZIP P-3 Orion Anti-sub/recon
13. SKIPPR.ZIP Beechcraft Skipper
14. XP55.ZIP Curtiss-Wright experimental canard (WWII)
15. SHINDN.ZIP Shinden, Japanese Experimental canard (WWII)
16. BD-5J.ZIP Bede 5 Jet
17. BD-5.ZIP Bede 5 Prop version
18. C310.ZIP Cessna 310 twin
19. STRSHP.ZIP Beechcraft Starship
20. STAGGR.ZIP Beechcraft G17S Staggerwing
RUSSAIR SET #3
21. POND.ZIP Rutan/Pond Unlimited Racer
22. MOONEY.ZIP 1961 Mooney Mark 21 M(20B)
23. FOKDRI.ZIP 1917 Fokker Dr.I Triplane
24. HOOVER.ZIP Bob Hoover's yellow P-51D/Rockwell
25. STS.ZIP The Space Shuttle Orbiter
26. P-51B.ZIP North American P-51 B/C model
27. BD-10.ZIP Jim Bede's BD-10 Supersonic Homebuilt
28. P51DRM.ZIP North American P-51D Mustang
29. JN4DRM.ZIP Curtiss JN-4D Jenny biplane trainer
30. HK-1RM.ZIP Hughes HK-1 Flying Boat, "Spruce Goose"
BONUS PLANES (When ordering all 3 sets)
31. C205RM.ZIP Cessna 205
32. PORTER.ZIP Pilatus Turbo Porter
If you wish to have these sets of my AAF models, including the AFX source
file and flight reference SIM files, then just send a check
or International Money Order or International Postal Money Order
(payable in U.S. dollars) plus shipping and handling charges for shipping
outside the USA to:
Russell Mueller
507 Washington Gdns
Washington, NJ 07882-9205
If ordering from outside the U.S., then please use an International
Money Order (payable in U.S. dollars) available at most banks and
post offices around the world. Include $3.00 U.S. for postage and
handling.
Specify disk size desired, and which set of RUSSAIR planes that you would like.
<End Of File>