home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
C!T ROM 2
/
ctrom_ii_b.zip
/
ctrom_ii_b
/
DOOM
/
COLLECT
/
OLDIPX
/
DRIVERS
/
PKTDRVR.H
< prev
next >
Wrap
C/C++ Source or Header
|
1990-04-11
|
3KB
|
104 lines
#ifndef CL_ETHERNET
#define PK_MAX 3 /* Add extra interrupt hooks if you increase this */
/* Packet driver interface classes */
#define CL_NONE 0
#define CL_ETHERNET 1
#define CL_PRONET_10 2
#define CL_IEEE8025 3
#define CL_OMNINET 4
#define CL_APPLETALK 5
#define CL_SERIAL_LINE 6
#define CL_STARLAN 7
#define CL_ARCNET 8
#define CL_AX25 9
#define CL_KISS 10
#define CL_IEEE8023 11
#define CL_FDDI 12
#define CL_INTERNET_X25 13
#define CL_LANSTAR 14
#define CL_SLFP 15
#define CL_NETROM 16
#define NCLASS 17
/* Packet driver interface types (not a complete list) */
#define TC500 1
#define PC2000 10
#define WD8003 14
#define PC8250 15
#define ANYTYPE 0xffff
/* Packet driver function call numbers. From Appendix B. */
#define DRIVER_INFO 1
#define ACCESS_TYPE 2
#define RELEASE_TYPE 3
#define SEND_PKT 4
#define TERMINATE 5
#define GET_ADDRESS 6
#define RESET_INTERFACE 7
#define GET_PARAMETERS 10
#define AS_SEND_PKT 11
#define SET_RCV_MODE 20
#define GET_RCV_MODE 21
#define SET_MULTICAST_LIST 22
#define GET_MULTICAST_LIST 23
#define GET_STATISTICS 24
#define SET_ADDRESS 25
/* Packet driver error return codes. From Appendix C. */
#define NO_ERROR 0
#define BAD_HANDLE 1 /* invalid handle number */
#define NO_CLASS 2 /* no interfaces of specified class found */
#define NO_TYPE 3 /* no interfaces of specified type found */
#define NO_NUMBER 4 /* no interfaces of specified number found */
#define BAD_TYPE 5 /* bad packet type specified */
#define NO_MULTICAST 6 /* this interface does not support multicast */
#define CANT_TERMINATE 7 /* this packet driver cannot terminate */
#define BAD_MODE 8 /* an invalid receiver mode was specified */
#define NO_SPACE 9 /* operation failed because of insufficient space */
#define TYPE_INUSE 10 /* the type had previously been accessed, and not released */
#define BAD_COMMAND 11 /* the command was out of range, or not implemented */
#define CANT_SEND 12 /* the packet couldn't be sent (usually hardware error) */
#define CANT_SET 13 /* hardware address couldn't be changed (> 1 handle open) */
#define BAD_ADDRESS 14 /* hardware address has bad length or format */
#define CANT_RESET 15 /* couldn't reset interface (> 1 handle open) */
typedef union {
struct {
unsigned char lo;
unsigned char hi;
} byte;
unsigned short word;
} ureg;
#define CARRY_FLAG 0x1
struct pktdrvr {
int class; /* Interface class (ether/slip/etc) */
int intno; /* Interrupt vector */
short handle1; /* Driver handle(s) */
short handle2;
struct mbuf *buffer; /* Currently allocated rx buffer */
struct mbuf *rcvq; /* Receive queue */
struct iface *iface;
};
extern struct pktdrvr Pktdrvr[];
/* In pktdrvr.c: */
void pkint __ARGS((int dev,unsigned short di,unsigned short si,
unsigned short bp,unsigned short dx,unsigned short cx,
unsigned short bx,unsigned short ax,unsigned short ds,
unsigned short es));
int pk_send __ARGS((struct mbuf *bp,struct iface *iface,int32 gateway,
int prec,int del,int tput,int rel));
/* In pkvec.asm: */
INTERRUPT pkvec0 __ARGS((void));
INTERRUPT pkvec1 __ARGS((void));
INTERRUPT pkvec2 __ARGS((void));
#endif /* CL_ETHERNET */