home *** CD-ROM | disk | FTP | other *** search
-
- Slackware-1.1.55.diff1 will do this for a standard 1.1.55 kernel:
-
- Add nec260-0_3 patches (NEC CD-ROM on the IDE interface)
- Add sony535-0.6 patches (Sony 531/535 CD-ROM drives)
- Add dpt_EATA_0.3a patches (EATA compliant ISA and EISA SCSI)
- Add Adaptec 274x SCSI patches.
- Add Always in2000 patches.
- Fix a couple floppy driver bugs.
-
- NOTE: IN2000 and Adaptec 1742 drivers should not be compiled into the same
- kernel. Do not compile the NEC CD-ROM driver into your kernel unless you
- have an NEC CD-ROM driver attached as the slave device on your IDE controller.
- I have no idea what it does if it finds a hard drive there...
-
- Slackware-1.1.55.diff2.quota should be applied after Slackware-1.1.55.diff1.
- It adds user/group quota support.
-
- Slackware-1.1.55.diff3.ramdisk adds this text before a ramdisk is loaded
- from floppy:
-
- Please remove the boot kernel disk from your floppy drive, insert a
- root/install disk (such as one of the Slackware color144, colrlite,
- tty144, or tty12 disks) or some other disk you wish to load into a
- ramdisk and boot, and then press ENTER to continue.
-
- Using these patches may prevent new kernel patches > 1.1.55 from patching in
- cleanly, so be aware.
-
- NOTE: I've made new patches for 1.1.58 except for quota -- they don't patch in
- cleanly anymore. Hopefully these will be upgraded soon. In the meantime, use
- the 1.1.54 kernels with quota support if you need it.
-
- Good luck -
-
- Patrick Volkerding
- volkerdi@mhd1.moorhead.msus.edu
-
-