home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PowerPlay 1998 July
/
PowerPlay0798.bin
/
Online
/
WINCIMIE
/
CFOSPRO.LIB
/
CFOS.HLP
< prev
next >
Wrap
Text File
|
1997-07-29
|
10KB
|
222 lines
-------------------------- cFos Command Overview ---------------------------
? This help
A Force Answer
Bn Protocol for outbound call: 0=X75, 1=V110 38k4, 2=V110 19k2,
4=Elink, 5=Btx, 6=Btx w/VT-100, 7=Analogue modem, 8=PPP mode,
9=CIS via BTX, 10=V110 9k6 8n1, 11=V110 9k6 7e1, 12=V120,
13=X31, 14=Rconfig
D.. Dial a number, l=last, f=leased line, v=spv
En Command Echo (0=off, 1=on)
Hn 0=Terminate call, 1=Reject call
In Inquiry, n=0,1,2,4[,5][,6][,7]
Ln [CAPI20+Modem] Speaker volume control (0=silent..3=max)
Mn [CAPI20+Modem] Speaker control (0=off, 1=on w/dialing, 2=on)
Qn Quiet mode: 1=suppress results
Sr=n Set register r to value n
Sr.b=n Set bit b in register r to n
SrH=n Set high byte of reg r to n
SrL=n Set low byte of reg r to n
Sr? Query register r
Vn 0=numeric, 1=verbal results
Xn Result codes: 0=min, 9=max
Zn Reset and read profile n from disk
&Ak=n [CAPI20] Set MSN k to value n
&Bn Bundling: use n b-channels for next outbound call
&Cn DCD operation
&Dn status line: 1=on if port is init'ed, 2=on w/calling, 3=always on
&En Source EAZ
&F reset to Factory defaults
&Gn Accumulated costs mgmt: 0=show, 1=clear
&H<S> Set hangup-sequence to "+++<S><cr>"
&I.. Listen to service: a=analog, d=digital
&Kn Inband-negotiation/V.42b: 0=both off, 1=V.42bis, 2=only nego.
&L.. Listen to EAZs/MSNs: 0-9, *=all
&Mn Bundling mode: 0=static, 1=dynamic
&O.. Set Outdial number
&Pn [CAPI20] Called subaddress
&Rn Reregister at CAPI; 1=force even if connections active
&Sn=.. Set string register
&Sn? Query string register
&T set clock to Tranxed time
&Un [CAPI20/X31] Calling Subaddress
&Vn View profile (n=0..2)
&Wn Write profile to number n on disk
&Xn Activate/Deactivate X.31
#Dn Switch rconfig to port n
#K.. Set rconfig password
#Tn 0=print trace buffer; 1=clear buffer; 2=print status to buffer
------------------------- cFos Register Overview ---------------------------
S0 0=manual, 1 or more=auto answer after S0'th "RING"
S1 Ring count
S3 CR value
S4 LF value
S5 BS value
S6 Column of callerid display (see s11)
S7 Secs to wait for connection
S9 Bitmapped register:
.0 enable any further result code
.1 enable "CONNECT <rate>", otherwise "CONNECT 9600"
.2 enable "RINGING"
.3 enable "RING <number>"
.4 enable /X75.. after "CONNECT"
.5 enable "ERROR/<cause>"
.6 enable "NO CARRIER/<cause>"
.7 enable /V42B after "CONNECT"
.8 enable /PPP after CONNECT
S10 Bitmapped register:
.0 enable "CONNECT.../ID=<callerid>"
.1 disable full status line, just display the callerid
.2 display service indicator & add. si numerical
.3 display "RING 1234..." instead of "RING<cr>ID=..."
.4 enable +++ATH0<CR> hangup sequence in BIOS emulator mode
.6 disable multiple CallerID's
.7 display S47 as baudrate on "CONNECT" messages
.8 reject calls with no CallerID
.9 enable 'Audible RING'
.10 reserved
.11 [cFos/Win+NT] 1=disable disconnect on port close
.12 [cFos/2] handle DTR like: 0=COM.SYS, 1=SIO
.13 ignore '?' and 'R' modifiers on incoming CCB calls
S11 Status linenumber
S12 Nummer of 1/18 sec. to wait before "CONNECT" message.
S13 Serviced EAZ Mask
S14 Serviced SI Mask
.0 videophone .7 data (64 kbits/s)
.1 telephone .8 X.25-services
.2 a/b-services .9 teletex 64
.3 X.21-services .10 mixed mode
.4 telefax (Group 4) .15 BTX (new standard)
.5 BTX (64 kbits/s)
S15 B-channel ID
S16 Service Indicator
S17 Add. Service Indicator
S18 Source EAZ
S19 Inactivity timer in mins, 0=disabled
S20 B2 protocol
1 X.75 SLP 4 SNA-SDLC 8 V.110 w/transp B2
2 Transp-HDLC 5 X.75 BTX 9 V.110 SNA-SDLC
3 Transparent 7 LAPD 10 V.110 X.75 SLP
S21 B3 protocol
S22 B2 framelength
S26 B2 window size
S27 V110 user rate
S28 max B2 Framelen for send
S29 B3 protocol overhead
S40 Controller
S41 InfoMask low
S42 InfoMask high
S43 Default V110 user rate & protocol
S44 Audio Mode for incoming calls: 0=Voice, 1=Analogue modem
S45 X.25 / X.31 delivery confirmation
S46 X.25 / X.31 group/channel
S47 Baudrate to return on "CONNECT", if S10.7=1
S48 Suppress the first <S48> "RING"s.
S49 Number of digits of caller-id to ignore when called with CCB
S50..59 Default Add. Serv. Indicator and B2-Protocol for every EAZ
S60 Charge limit, main port
S61 Charge limit, aux. port
S62 Time limit, main port
S63 Time limit, aux. port
S64 Lower cps limit
S65 Upper cps limit
S66 Charge simulation timer
S67 Pre-off disconnect time
S68 Connect tries
S69 Delay between dyn. CCB tries
S70 Cost of one charging unit
S71 Charging units * S70 % 100
S72 Charging units * S70 / 100
S73 [CAPI20] Suppress CallerID: Bit 0..9 for MSN 0..9
S75 Internal use, do not change
.7 do not send wake-up PPP frame at session start
S76 Handling of calls w/o service signalling: 0=X75, 1=use ATB setting
S77 If 01910 is part of called#, behave as if 1=ATB5, 2=ATB6, 3=ATB9 set
S78 [cFos/2] Delay between CONNECT and received first data in 1/18 sec
S79 Number of channels allowed for incoming CCB, 0=all, 1=no further
S80 [Fax] Vertical resolution: 1=high
S81 [Fax] Bit-mapped register
.0 enable +FCLASS=0
.1 enable +FCLASS=1
.2 enable +FCLASS=2
.3 enable +FCLASS=2.0
.7 enable +FET: response
S82 [Fax] Minimum scan time per line
--------------------- cFos CAPI 2.0 Register Overview ----------------------
S100 [CAPI20] B1 Protocol
0 64 kBit/s, HDLC framing (CAPI 2.0 default)
1 64 kBit/s, bit transparent
2 V.110 async, w/ start/stop byte framing
3 V.110 sync, w/ HDLC framing
4 T.30 for FAX group 3
5 64 kBit/s inverted w/ HDLC framing
6 56 kBit/s, bit transparent
S101 [CAPI20] B2 Protocol
0 ISO 7776 (X.75 SLP) (CAPI 2.0 default)
1 Transparent
2 SDLC
3 LAPD, Q.921 for D channel X.25
4 T.30 for FAX group 3
5 Point to Point Protocol (PPP)
6 Transparent (ignoring framing errors of B1)
S102 [CAPI20] B3 Protocol
0 Transparent (CAPI 2.0 default)
1 T.90NL w/ compatibility to T.70NL
2 ISO 8208 (X.25 DTE-DTE)
3 X.25 DCE
4 T.30 for FAX group 3
S103 [CAPI20] B1 Protocol Config, Rate
S104 [CAPI20] B1 Protocol Config, Bits per Char
S105 [CAPI20] B1 Protocol Config, Parity
0=no, 1=odd, 2=even
S106 [CAPI20] B1 Protocol Config, Stop Bits
0=1 stop bit, 1=2 stop bits
S107 [CAPI20] CIP mask, low
.0 don't provide CIP value (all other bits must be 0)
.1 speech .6 video
.2 unrestricted digital info .7 packet mode
.3 restricted digital info .8 56 kBit/s rate adaption
.4 3.1 kHz audio .9 unrestr. digital info w/tones
.5 7 kHz audio .10..15 reserved
S108 [CAPI20] CIP mask, high
.0 telephony .7 telex
.1 FAX group 2/3 .8 X.400
.2 FAX group 4, class 1 .9 X.200
.3 teletex, basic & mixed .10 7 kHz Telephony
.4 teletex, basic & proc. .11 video telephony, 1st con.
.5 teletex, basic mode .12 video telephony, 2nd con.
.6 videotex .13..15 reserved
S109 [CAPI20] Info mask, low
.0 Cause info .4 Call progression
.1 Date/Time .5 Facility
.2 Display .6 Charging info
.3 User-user info .7..15 reserved
S110 [CAPI20] Info mask, high
.0..15 reserved
S111 [CAPI20] CIP value
S112 [CAPI20+Modem] Bit-mapped register:
.0 Disable retrain
.1 Disable calling tone
.3..2 Guard tone: 00=none, 01=1800 Hz, 10=550 Hz
.5..4 Loudspeaker (See ATLn)
00 off 10 always on
01 on while dialing & negotiation
.7..6 Speaker volume (See ATMn)
00 silent 10 normal high
01 normal low 11 maximum
S113 [CAPI20+Modem] Max connect rate, 0=adaptive
--------------------- cFos String Register Overview ------------------------
&S0 [CAPI20] DSS1 Bearer Capability, 14 bytes
&S1 [CAPI20] DSS1 Low Level Compatibility, 17 bytes
&S2 [CAPI20] DSS1 High Level Compatibility, 5 bytes
&S3 [X31] Call User Data, 32 bytes