1 %s is NOT a GS Combo data file. Be sure to check the online help's "File Conversion" section for details.
2 Cannot reserve more than %i total voices
3 Voice Reserve information not stored with GS Sounds
4 %s is NOT a GS Sound file
5 Out of range
6 You need to select at least one part for a GS Sound File Save
9 The SOUNDCanvas can be erratic when using non-standard Tone / Rhythm Part assignments
10 Too many Parts in the GS Sound file to fit into current GS Combo file
11 You cannot load a GS Sound file starting on a Rhythm Part
12 Invalid Starting Part
13 %s is NOT a GS Drum Kit file
15 The Drum Kit editor is disabled in the unregistered Shareware Edition.
16 "Live" mode is available only to registered users of the Shareware Edition. %s will operate in "normal" mode.
17 The "%s" function is not yet available. Please stay tuned.
50 Instructions: (1) Assign a unique number between 1 and 8 for each of your CanvasMan synths. (2) Set the Current Definition to 1. (3) Choose the correct Model, Device ID and Output Port for that synth.
51 (4) Repeat steps 2 and 3 for each remaining synth, increasing the Current Definition as needed. (5) Reselect this synth's Current Definition (probably #1) and choose OK.
52 (6) If you have more than one CanvasMan synth, create shortcuts for them (e.g., "CNVSMN32 /S:2").\n\nPress the Help button below for more details.
100 Select a different Part to edit
101 New %s file (Ctrl+N)
102 Open existing %s file (Ctrl+O)
103 Save %s file (Ctrl+S)
121 Create new GS Combo file
122 Open GS Combo file
123 Save current GS Combo file
124 Save current GS Combo file with a new file name
125 Open an existing GS Sound file
126 Save one or more Parts as a new GS Sound file
128 Open an existing GS Drum Kit file
129 Save a rhythm Part as a new GS Drum Kit file
131 End CanvasMan32 session
140 Resend current GS Combo file to the synth
141 Edit several common settings for the current Part
142 Edit several additional common settings for the current Part
143 Edit modulation and pitch bend parameters for the current Part
144 Edit channel and polyphonic aftertouch parameters for the current Part
145 Edit continuous controller parameters for the current Part
146 Edit global parameters that affect all Parts
147 Specify voice reserve settings and whether Parts are tonal or rhythmic
148 Edit the synth's two Drum Kits
149 Scroll backward
150 Scroll forward
151 Edit live performance-oriented settings
170 Edit several common settings for all Parts
171 Edit several additional common settings for all Parts
200 Define your synthesizer setup to CanvasMan32
201 Specify storage locations for Combos, Sounds, Drum Kits and SysEx files
210 Display Canvasman32's help contents
211 Visit PowerJam Systems on the Internet
212 Search for help on specific items
213 Learn how to use Windows' help itself
214 Display CanvasMan32 version and copyright information