home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / unix / amiga / 650 < prev    next >
Encoding:
Internet Message Format  |  1996-08-06  |  1.8 KB

  1. Path: minyos.its.rmit.EDU.AU!not-for-mail
  2. From: t9551343@minyos.its.rmit.EDU.AU (Gregory David Thomas)
  3. Newsgroups: comp.unix.amiga
  4. Subject: Re: Linux1.2.13pl7 on A1200 IDE?
  5. Date: 16 Mar 1996 03:40:26 GMT
  6. Organization: Royal Melbourne Institute of Technology, Melbourne, Australia.
  7. Distribution: world
  8. Message-ID: <4idd7a$deb@aggedor.rmit.EDU.AU>
  9. References: <tom.4kip@grafix.xs4all.nl>
  10. NNTP-Posting-Host: minyos.its.rmit.edu.au
  11. NNTP-Posting-User: t9551343
  12. X-Newsreader: TIN [UNIX 1.3 950824BETA PL0]
  13.  
  14. Tom Eugelink (tom@grafix.xs4all.nl) wrote:
  15. : Hello Gregory,
  16. :  In a message dated 07 Mar 96 you wrote to All :
  17. :  GDT>     I have tried to put linux onto my HD using mkfs.ext2 and it dies  most
  18. :  GDT> of the way through and starts throwing up errors. I haven't used 
  19. :  GDT> linux before, this is my first attempt.
  20. : I've been there too. All though on a A2000 with Derringer 030 and GVP Series II
  21. : SCSI. 
  22. : I discovered that the 0.9.13 release did work, but this release did not have
  23. : C++ support which I needed. All of the 1.2.13plX (up to pl7) releases had the
  24. : SCSI error I got as soon as I tried to install a filesystem. It seems you're
  25. : system has the same problem with IDE.
  26. : Eventually I switched to NetBSD 1.1 which works without trouble.
  27. : On my system (25Mhz) it is a bit sluggish, but I think on your system it might
  28. : work just fine.
  29. : So, maybe try to install linux 0.9.13 and see if troubles go away or (if you 
  30. : have a little more HD space left to spent) use NetBSD 1.1 and see what 
  31. : happens...
  32. :  GDT>     Can it work on an A1200 (50mhz 030 MMU 882 8MB fast)? Or does it  not
  33. :  GDT> support the controller on the A1200?
  34. : I should work. What kind of accelerator board do you have?
  35.  
  36. Microbotics M1230XA 50
  37.  
  38. Thanks for the advice. I am still trying to get Linux to work, but 
  39. considering my options.
  40.  
  41. Greg
  42.  
  43.