home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / unix / amiga / 54 < prev    next >
Encoding:
Internet Message Format  |  1996-08-06  |  2.5 KB

  1. Path: soap.news.pipex.net!pipex!usenet
  2. From: fr30@am061.du.pipex.com (George Harvey)
  3. Newsgroups: comp.unix.amiga
  4. Subject: Re: NetBSD 1.1, Picasso II and video modes
  5. Date: 8 Jan 96 22:58:21 GMT
  6. Organization: Not an Organization
  7. Distribution: world
  8. Message-ID: <fr30.02gg@am061du.pipex.com>
  9. References: <19951206.7368738.EAB1@contessa.phone.net> <fr30.02ge@am061du.pipex.com> <4cnvlg$f9b@news.mtu.edu>
  10. NNTP-Posting-Host: an052.du.pipex.com
  11. Mime-Version: 1.0
  12. Content-Type: text/plain; charset=iso-8859-1
  13. Content-Transfer-Encoding: 8bit
  14. X-NewsSoftware: GRn 2.1 Feb 19, 1994
  15.  
  16. In article <4cnvlg$f9b@news.mtu.edu> cdh@mtu.edu (Chris Hooper) writes:
  17. > George Harvey <fr30@am061.du.pipex.com> wrote:
  18. > > 1. Unable to use the Picasso as a console
  19. > I can't help you on this one.  The NetBSD generic kernel
  20. > recognized and used my Picasso II without problems.
  21. > Is it possible your monitor does not support the display
  22. > rate the NetBSD kernel sets the monitor at?  It is a
  23. > pretty low frequency, so I'd hope that's not the case.
  24.  
  25. I've tried a different monitor - same result.
  26.  
  27. > > 2. Unable to set Picasso video modes
  28.  
  29. [ video mode list deleted ]
  30.  
  31. > -Chris Hooper
  32.  
  33. Thanks for the list, it has helped me to get a bit further. Using
  34. your values I can now successfully run 'grfconfig' (it appears
  35. that the console line is essential and my horizontal values were
  36. way wrong)
  37.  
  38. However, I STILL get a blank screen!  I start Xcl and the Picasso
  39. fires up and gives me a blank white screen. I can tell from the
  40. disk activity that the system is still running and I can type
  41. commands into the invisible windows, 'shutdown now' works well
  42. at this point :-)
  43.  
  44. Getting blank screens in both console mode and with X suggests to
  45. me that maybe there is some compatibility problem between the driver
  46. and my card (I have no problems with the card running Workbench).
  47. To check if this might be the case, could anyone with working
  48. (or non-working) NetBSD and Picasso cards please check the 
  49. version numbers and jumper settings and post the results. For my
  50. board, the versions and jumpers are:
  51.  
  52. Board:        Picasso II
  53. RAM:        2MB
  54. Version:    1.4  (etched onto edge of board near Zorro connector)
  55. Cirrus chip:    CL-GD5426-80QC-A
  56. Jumpers:    JP301 - open
  57.         JP401 - lower 2 pins jumpered (nearest Zorro bus)
  58.         JP402 - open
  59.  
  60. BTW, anyone know what all these jumpers do? I think JP402 is to set
  61. segmented mode but I can't find anything in the manual about the
  62. others.
  63.  
  64. -- 
  65.  
  66.     George Harvey                   | Amiga A3000T, Picasso-II,
  67.     email: fr30@dial.pipex.com      | MFC-III, AmiTCP
  68.  
  69.