home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / sys / amiga / programmer / 4824 < prev    next >
Encoding:
Internet Message Format  |  1996-08-05  |  2.7 KB

  1. Path: informatik.tu-muenchen.de!fischerj
  2. From: fischerj@informatik.tu-muenchen.de (Juergen "Rally" Fischer)
  3. Newsgroups: comp.sys.amiga.programmer
  4. Subject: Re: doubling pixels horiz
  5. Date: 5 Mar 1996 15:00:45 GMT
  6. Organization: Technische Universitaet Muenchen, Germany
  7. Distribution: world
  8. Message-ID: <4hhkut$662@sunsystem5.informatik.tu-muenchen.de>
  9. References: <4gjjnl$e23@sinsen.sn.no> <1496.6627T1019T870@ifi.uio.no>
  10. NNTP-Posting-Host: hphalle6g.informatik.tu-muenchen.de
  11. Originator: fischerj@hphalle6g.informatik.tu-muenchen.de
  12.  
  13.  
  14. In article <1496.6627T1019T870@ifi.uio.no>, ludvigp@ifi.uio.no (Ludvig Pedersen) writes:
  15. |> Organization: Dept. of Informatics, University of Oslo, Norway
  16. |> Lines: 36
  17. |> Message-ID: <1496.6627T1019T870@ifi.uio.no>
  18. |> References: <4gjjnl$e23@sinsen.sn.no>
  19. |> NNTP-Posting-Host: gymir.ifi.uio.no
  20. |> X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
  21. |> 
  22. |> >(Ludvig Pedersen)
  23. |> >>>: >AGA 64bit sprites (and what a hard work that was).
  24. |> >>>: No the source was kind of weird, several asm-instructions on the sam
  25. |> >>>: etc! :)
  26. |> >>>I _KNEW_ that was the reason why you call the source bad!
  27. |> >>>If you would have read the docs, you'd have read that I even
  28. |> >>>provided the converter ;)
  29. |> >>Yes, and I used it! ;) It was still terrible!!! (Sorry no personal offe
  30. I didn't claim it would look good after using the converter....
  31.  
  32. |> >Stop  complaining, your source was easily one of the ugliest sources of
  33. |> >the  year  (after the blitterscreen source :)..  I had to do a complete
  34. |> >cleanup before I used it.
  35. |> >Why are coders so messy?
  36. |> Don't know. :-/
  37. Don't know either :\
  38.  
  39. |> 
  40. |> >>>: There is a lot of things to think about! :(
  41. |> >>>you can't think about all things.
  42. |> >>>Do it for PAL and provide 4 pass solution for other monitors.
  43. |> >>I guess you don't have a Multisync? Just like the coder how put their c
  44. |> >>sections in chipram because they don't have any fast memory! :-/
  45. |> >>Just try, it isn't much harder than PAL.
  46. |> >Hmm..  Perhaps you could give some more info on this?  Are you sure the
  47. |> >screen  will  be positioned perfectly on each monitor?  I had to adjust
  48. |> >my  settings  to make the DBLPAL and PAL screenmodes appear at the same
  49. |> >place on my monitor.
  50. |> I'm not talking about banging all the HW-registers and setup a DBLPAL screen
  51. |> myself!!
  52. |> 
  53. |> I'm talking about letting the system do the job by using an intuition screen,
  54. |> and do some small modifications with a UCopList.
  55. and doing some undocumented reads (writes ?) from system-copperlists ;)
  56.  
  57. |> 
  58. |> 
  59. |> 
  60. |> <sb>Ludde - Amiga Demo Coder
  61. |> <sb>Virtual Reality & Official Be developer
  62. |> <sb>ludvigp@ifi.uio.no
  63. |> 
  64. ------------------------------------------------------------------------
  65.    fischerj@Informatik.TU-Muenchen.DE (Juergen "Rally" Fischer)   =:)
  66.  
  67.