IOS/2 Warp Server Backup/Restore has run out of memory due to lack of system resource.
IOS/2 Warp Server Backup/Restore has run out of semaphores due to lack of system resource.
IOS/2 Warp Server Backup/Restore has run out of threads due to lack of system resource.
Press "Abort" to shut down the application, or press "Retry", and then try closing another open application. OS/2 Warp Server Backup/Restore will then attempt to allocate the resource again in 30 seconds time.IOS/2 Warp Server Backup/Restore encountered internal error 000000. The application cannot continue.IOS/2 Warp Server Backup/Restore has run out of system resource.
IInvalid keyword '%2' in '%1'.IInvalid value '%3' for keyword '%2' in '%1'.IRequired keyword '%2' is not contained in '%1'.IContains data backed up to %1I%1IUnable to delete Backup Set. Please remove all files from the path '%1' by hand to delete this Backup Set.
IError creating directory '%1', the Backup Set cannot be created. Check that there is sufficient space on the drive, and that you can write data to it.
IError writing file '%1', the Backup Set cannot be created. Check that there is sufficient space on the drive, and that you can write data to it.
IREXX is not properly installed on the system.ICould not run the REXX program '%1'.IREXX program '%1' returned '%2'.IInvalid syntax '%2' in '%1'.IThe profile has been destroyed. You must reinstall OS/2 Warp Server Backup/Restore to set up the profile correctly.
IThe profile cannot be read from disk. You must reinstall the product before OS/2 Warp Server Backup/Restore can work.
IOS/2 Warp Server Backup/Restore cannot save its initialization file on your hard drive. The program will abort.
ICannot find initialization file on your hard drive. If you have already installed OS/2 Warp Server Backup/Restore, please enter the path to which it was installed. If not, path to which you would like OS/2 Warp Server Backup/Restore to be installed.ICannot save initialization file on your hard drive. Please enter a path to which the initialization file can be saved.
INot restored because object resides at least partly on unavailable volumesICan't open target file; failed with error below:ICame to end of source file before expected.IAttempted to decompress a file using PSnS decompression, but the file doesn't appear to be PSnS compressed.
IPSnS decompression found that the compressed file was corrupted.
IThere is no default Backup Set selected.IThe Backup Method uses the default File Filter but there is no default File Filter selected.IThe Backup Method uses the default Rulebook but there is no default Rulebook selected .IDecompression failed (Named Pipe error %1)
ICompression failed (Named Pipe error %1)
ICould not decompress %1 to %2
ICould not compress %1 to %2
IThe old PSnS Compression has been removed from the product. It is not possible to restore data compressed using it.
IThe File Filter '%1' contained invalid rules which have been removed.IInternal error #%1 has occurred. Press "OK" to continue.IArchive error #%1 has occurred. Please consult IBM.
IArchive error #%1 has occurred. The restore has been cancelled.
ICould not back up network access permissions.ICould not restore network access permissions.ISuccessfully backed up network access permissions.ISuccessfully restored network access permissions.IRestore has been cancelledIBackup has been cancelledICould not find the file '%1'.ICould not find the folder information for '%1'.ICould not find the directory '%1'.ICould not find the specified source '%1'
IThe File Filter '%1' contained invalid rules. The backup has been cancelled.IThe Rulebook '%1' contained invalid rules. The backup has been cancelled.IAn error occurred trying to run the user exit '%1' prior to backup. Please check that '%1' exists, and that you have REXX installed.
Do you wish to continue the backup without running the user exit?
IAn error occurred trying to run the user exit '%1' after backup.IUnable to start backup thread. There may be another application runningat a high priority. The backup has been cancelled.IUnable to find Storage Device '%1' for Backup Set '%2'. You will have to install the Storage Device to perform a backup to this Backup Set.
IUnable to open Storage Device '%1' for Backup Set '%2'. Check the Storage Device settings before trying again.
IA serious error prevented the backup running correctly. Please correct the error before running another backup.
IThe Backup Set '%1' has become corrupted. Empty the Backup Set before attempting to back up to it again.
ICould not find the Backup Set referenced in Backup Method '%1'. The backup cannot proceed.IBackup Set %1 has been Transferred Out, you may not use it until it has been Transferred In back to this machine. The operation has been cancelled.
ICould not open the default Backup Set while running Backup Method %1.IYou have attempted to back up to the default Backup Set, but there is no default Backup Set defined. You must pick a default Backup Set.
ICould not read the extended attributes on '%1'.INo data was backed up.
IThere were errors during the backup. Please check the log for details.
ICould not find the file '%1' in the archives.ICould not find the folder information for '%1' in the archives.ICould not find the directory '%1' in the archives.ICould not find the specified source '%1' in the archives.IAn error occurred trying to run the user exit '%1' prior to restore. Please check that '%1' exists, and that you have REXX installed.
Do you wish to continue the restore without running the user exit?
IAn error occurred trying to run the user exit '%1' after restore.IUnable to start restore thread. There may be an application runningat a high priority. The restore has been cancelled.IA serious error prevented the restore running correctly. Please correct the error before running another restore. ICould not open the Backup Set referenced in Restore Method %1.IYou have attempted to restore from the default Backup Set, but there is no default Backup Set defined. You must pick a default Backup Set.
ICould not open the default Backup Set while running Restore Method %1.IBackup Set %1 has been Transferred Out, you may not restore from it until it has been Transferred In back to this machine. The operation has been cancelled.
ICould not write extended attributes to '%1'
ISome files could not be restored because they were locked. The OS/2 Warp Server Backup/Restore locked file restore program can restore the files the next time the machine is booted. Do you want the files to be restored the next time you boot your machine?
INo data was restored.IThe long name '%1' was added to the object's extended attributes.IThe target file was locked so the object has been restored to '%1', and will be restored to '%2' after the next reboot.
IThere were errors during the restore. Please check the log for details.
INo device interfaces were found. Run OS/2 Warp Server Backup/Restore installation to install devices.
IThe File Filter '%1' could not be loaded. The backup has been cancelled.IThe Rulebook '%1' could not be loaded, The backup has been cancelled.IThe user exit '%1' returned the error '%2' prior to backup.
Do you wish to continue the backup without running the user exit?
IThe user exit '%1' returned the error '%2' after backup.
IThe user exit '%1' returned the error '%2' prior to restore.
Do you wish to continue the restore without running the user exit?
IThe user exit '%1' returned the error '%2' after restore.
IThe restored user accounts database is netacc.bkp.
To replace your current user accounts database, boot from diskette and copy netacc.bkp over net.acc.
You should then use Backup/Restore to restore net.acc again in order to restore the access control lists.INetwork connection lost.
IStorage Device '%1' could not be found, the Backup Set cannot be deleted.
IThe Backup Set cannot be accessed. Transfer In has been cancelled.
IThe Backup Set '%1' has not be Transferred Out, so it does not need to be
Transferred In! Transfer In has been cancelled.
IThe device could not perform the Transfer In. No Backup Sets have been Transferred In.
IThe Backup Set cannot be accessed. Transfer Out has been cancelled.
IThe Backup Set %1 has already been Transferred Out. It cannot be Transferred Out again! Transfer Out has been cancelled.
IThe device could not Transfer Out Backup Set '%1'. The Backup Set will not be available for Transfer In on another machine.
I%1 does not support Transferring Out. The Transfer Out has been cancelled.
I%1 could not be opened. The Transfer In has been cancelled.
I%1 does not support Transferring In. The Transfer In has been cancelled.
I%1 returned an error when trying to list Backup Sets available for Transfer In. %2
INo Backup Sets were found for Storage Device '%1', so none can be Transferred In.
IThe Backup Set to be Transferred In clashes with an existing Backup Set.You will not be able to transfer it in unless you remove the existing Backup Set.
I%1 returned an error while the Backup Set was being emptied. The empty can continue, but some data may still remain on the backup media.
IThe Backup Set %1 cannot be emptied because it is already being used by another process. Please try again when the current action has finished.
IThe Backup Set '%1' could not be found on the Storage Device, and therefore could not be Transferred In.
IThe Index Files for the Backup Set '%1' on the Storage Device are not complete.
Therefore the Backup Set '%1' cannot be Transferred In.
IThe Backup Set '%1' is not marked as Transferred Out on the Storage Device.
You should not choose to Transfer In the Backup Set unless you are sure that no other machine currently has this the Backup Set Transferred In, as data consistency would be compromised.
Do you really wish to Transfer In the set now?
IUpdating control filesIBacking up control filesIYou have requested to Transfer In the Backup Set '%1' over itself. The local control files will be replaced by those on the Storage Device. Do you really wish to proceed?
IThe Backup Set '%1' cannot be Transferred In because it has the same internal identifier as the Backup Set '%2'. This is statistically very rare. If you really wish to Transfer In the set '%1', you must first Transfer Out and forget, or delete the Backup Set '%2'.
IA different Backup Set with the same name '%1' is still known about by the system. You must Transfer Out and forget or delete the existing Backup Set, before Transferring In in another Backup Set with the same name.
IThe Backup Set '%1' is not marked as Transferred Out. Please be sure that this is one of the Backup Sets you were using before you had a disaster, since if this set is actually in use by someone else, and you transfer it in, data could be comprimised.
Do you wish to proceed?
IThe Storage Device '%1' contains no Backup Sets to Transfer In.IChecking control filesIA User Exit is runningIUnable to write control file for operation, possibly due to lack of disk space. The operation is terminated.
IA previous backup operation to Backup Set '%1' was interrupted. OS/2 Warp Server Backup/Restore will now check the integrity of, and update the Index Files.
IA previous restore operation from the Backup Set '%1' was interrupted. OS/2 Warp Server Backup/Restore will now check the integrity of, and update the Index Files.
IA previous drop operation from Backup Set '%1' was interrupted. OS/2 Warp Server Backup/Restore will now check the integrity of, and update the Index Files.
I%1 object(s) had an old generation dropped, but no new generation backed up. Would you like to back these files up again now?
IInterrupting the backup had no harmful effect.
I%1 object(s) were in the process of being restored when the restore was interrupted. Would you like these files to be restored now, since some of these restored files may be in an incomplete state?
IInterrupting the restore had no harmful effect.
IInterrupting the drop had no harmful effect.
IInterrupted backup
IInterrupted restore
IInterrupted drop
IStarted restore at %1 %2
IStarted drop at %1 %2
IThe Index Files could not be updated. Until these Index Files can be updated, the Backup Set '%1' will not be usable. Please ensure that there is free space on the OS/2 Warp Server Backup/Restore drive. If you are not able to update these files, you should delete the Backup Set '%1', and create a new one instead.
Would you like to try updating again?
I^OKI^AbortI^RetryIThe backup set '%1' has unavailable volumes containing valid data. No data will be restored from any unavailable volumes.
Do you wish to proceed with the restore?
IStartupIStarting automatic backupISuccessful backupIUnsuccessful backupISuccessful restoreIUnsuccessful restoreIFirst runIStarting manual backupIStarting restoreIIIIIIIIIIIISelect device for Transfer Out
IFull
IIncremental
ISelect device for Transfer In
I'%1' is a Dual Device Backup set and there are no previous backupsI'%1' is a Dual Device Backup set and the last backup was %2ISelect Source DevicesISelect which device or devices to use -IBoth devicesIBase deviceIIncremental deviceIOKICancelIThis is a Dual Device Backup set, and the last backup was %1
I<Virtual>IConverting archive files for backupset %1IFile '%1' is too large to be restored to the target file system.
(.txt)