home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: SysTools
/
SysTools.zip
/
JAOW.ZIP
/
READ.ME
< prev
next >
Wrap
Text File
|
1995-10-26
|
3KB
|
84 lines
JUST ADD OS/2 WARP
Read.me
October 19, 1995
Installation
JUST ADD OS/2 WARP can be installed from OS/2 Warp, Windows 3.1
or Windows 95, and can then run in any of those environments.
A minimum of 6 megabytes of free hard disk space is required on
each operating system partition.
----------------------------------------------------------------------------
NOTE: JUST ADD OS/2 WARP must be installed from a FULL SCREEN
DOS command prompt - NOT in a DOS window.
----------------------------------------------------------------------------
OS/2 WARP
To install JUST ADD OS/2 WARP from OS/2 WARP:
1) Open the OS/2 System folder
2) Open the Command Prompts folder
3) Select and open the DOS Full Screen object
4) Change to the installation source drive or
drive\directory by typing the drive letter or drive\path and press
ENTER. JUST ADD OS/2 WARP can be installed from diskette or from
a directory on your hard drive. (examples - A: or C:\DOWNLOAD)
5) Type SETUP and press ENTER.
----------------------------------------------------------------------------
Windows 3.1
To install JUST ADD OS/2 WARP from Windows 3.1:
1) From the Windows 3.1 Program Manager select FILE from the menu bar
2) Select RUN from the FILE menu
3) Type A:SETUP to install from diskette or d:\directory\SETUP
to install from a directory on your hard drive (d:=drive letter)
----------------------------------------------------------------------------
Windows 95
To install JUST ADD OS/2 WARP from Windows 95:
1) From the Windows 95 Task Bar select START
2) Select RUN from the START menu
3) Type A:SETUP to install from diskette or d:\directory\SETUP
to install from a directory on your hard drive (d:=drive letter)
----------------------------------------------------------------------------
Usability Notes:
If you modify your hardware after installing JUST ADD OS/2 WARP, you
will want to re-run the ADVISOR utility to recapture your hardware
information. Run "\JUST_ADD\ADVISOR.BAT d:" (d:=drive letter where
JUST ADD OS/2 WARP is installed) from a Full Screen DOS session
and your new hardware configuration will be presented the next time
you run JUST ADD OS/2 WARP.
You can remove JUST ADD OS/2 WARP from you computer by typing C:\REMOVE
from a DOS command prompt. Be sure that you have closed JUST ADD OS/2
WARP before running REMOVE.
On some PCs, the mouse may not function in the Demo program when run
under Windows 3.1. Use the TAB key to navigate as instructed on the
screen.
If a program such as the UPGRADE ADVISOR will not launch from within
the JUST ADD OS/2 WARP kit, check to see if there is adequate hard
drive space to allow for growth in the system swapper file.
During installation, if you receive an error message, select "Ignore the
error and continue". The installation will complete normally.