home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osinsny1.txt
< prev
next >
Wrap
Text File
|
1997-04-15
|
2KB
|
49 lines
OSINSNY1 - SONY 31A CD-ROM ATTACHED TO A CARDINAL DSP16 IS
NOT RECOGNIZED - OS/2 WARP
01/08/96
=======================================================================
Sony 31A CD-ROM Attached to a Cardinal DSP16 Is
Not Recognized - OS/2 Warp
=======================================================================
Please Read Entire Document for Full Explanation of Procedure
-------------------------------------------------------------
DESCRIPTION
OS/2 Warp 3.0 does not recognize the SONY 31A connected to the Cardinal
DSP16 card. The Installation program requests the CD and then starts
looping and repeatedly asking for the CD.
RESOLUTION
The port address and IRQ for the CD-ROM are incorrect.
You probably downloaded the driver, SONY31A.ADD, and used the
parameters specified in the User's Guide to OS/2 Warp. By default, the
sound port address is 220h and the IRQ is 5. The CD-ROM is set for port
address 300 and IRQ 12.
Use the driver that came with OS/2 Warp and modify the SONY31A.ADD
statement in the CONFIG.SYS file to read:
SONY31A.ADD /A:0 /AT:05 /P:0300 /I:12 /V
Note: The port address and IRQ above should be for the CD-ROM, not the
sound card.
/P: is the address of the CD-ROM; /I: is the IRQ of the CD-ROM drive; /V
is for View (shows if the CD-ROM is recognized when the driver is
loaded).
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.