home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 33 VDrivers
/
33-VDrivers.zip
/
p2vidi11.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1998-05-07
|
5KB
|
155 lines
#
| README File for
|
| VideoIn driver VERSION 01.00.00 for OS/2 WARP Version 4
|
| Copyright (c) 1994-98 ELSA AG, Aachen (Germany)
|
| ELSA AG Internet : http://www.elsa.de
| Sonnenweg 11 LocalWeb : +49-(0)241-938800
| D-52070 Aachen CompuServe : GO ELSA
|
| ELSA Inc. Internet : http://www.elsa.com
| 2231 Calle De Luna CompuServe : GO ELSA
| Santa Clara, CA 95054
| USA
|
| ELSA Asia Inc. Internet : http://www.elsa.com
| 7F-11, No. 188, Sec. 5 CompuServe : GO ELSA
| Nanking East Road
| Taipei 105
| Taiwan, R. O. C.
|
| ELSA Japan Inc. Internet : http://www.elsa.com
| Mita Suzuki Building 3F CompuServe : GO ELSA
| 5-20-14 Shiba, Minato-ku
| Tokyo 108-0014
| Japan
|
| 05/07/1998, AKiefer
1. Overview
2. Contents
3. Installation
4. Notes
5. Restrictions
6. Caveats / Known Problems
------------------------------------------------------------------------
1 Overview
This package contains the P2VideoIn system software for
OS/2 WARP Version 4.
See section 2 for a list of files and their purpose.
Information in this file may not appear in the manuals.
Please read this file carefully to be aware of any changes to
the documentation. The information in this file supercedes
the printed documentation.
------------------------------------------------------------------------
2 Contents
README.TXT this file
LIESMICH.TXT German version of this README file
VIDVCI.SYS physical device driver
VIDVSD.DLL logical device driver
ELSAPAGE.DLL multimedia setup page
ELSAPLUG.DLL plugin for CUSeeMe/2
VIDFILES.SCR installation description file
CONTROL.SCR installation description file
CONFIG.CH installation description file
INI.CH installation description file
-----------------------------------------------------------------------
3 Installation
1) Please start "Multimedia Application Install" in your
"Install/Remove" folder
2) Select the drive and the directory containing the P2 VideoIn
driver-files.
3) You will see the item:
"P2VideoIn Device Driver"
4) Start the installation.
5) Please follow the instructions of the installation program.
The installation program will change your config.sys.
6) After the installation you have to reboot the system.
------------------------------------------------------------------------
4 Notes
4.1 Supported graphics boards
- ELSA GLoria Synergy ViVo
- WINNER 2000/Office ViVo
4.2 Settings
Before starting video in for the first time you should check
the settings and change them if neccessary.
Open the Folder OS/2 System > System Setup and start the
Multimedia Setup program.
Here you can find the property page "P2VideoIn". On the third
page there are the "Default Adjustments" for the device driver.
Check the settings for Input Connector (FBAS or SVHS) and
Camera (PAL, NTSC, SECAM or NTSC433) by pressing the monitor button.
You can change the values for brightness, contrast, sharpness,
tint or color, also.
These settings are stored by pressing the OK button.
4.3 Plugin für CUSeeMe/2
A plugin for the video conferencing program CUSeeMe/2 is a
part of this driver package.
To install it you should copy the file ELSAPLUG.DLL in your
CUSeeMe directory and follow the instructions of CUSeeMe/2
for the installation of plugins.
We have tested the plugin with the version CUSeeMe/2 Beta 1.8
an found some general problems of this beta version in
conjungation with color pictures.
So we had to use Pentium II systems in 16bpp resolutions to
make CUSeeMe/2 work satisfactory.
------------------------------------------------------------------------
5 Restrictions
- No multiboard support
------------------------------------------------------------------------
6 Caveats / Known Problems
6.1 FixPak3
DIVE doesn't perform a color conversion in TrueColor mode. Hence
it follows that in most cases the Software Motion Video will
be used.
fix : replace the system file DIVE.DLL by the corresponding file
of your backup (unpack dive.dl_).
6.2 Performance
Poor performnce at 16bpp, you are supposed to use 32bpp